| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
| overall dimensions (king size) | 2250 x 2090 x 1020 mm | |
|---|---|---|
| mattress recess platform dimensions | 2030 x 1930 mm | |
| side/foot rail height from floor | 320 mm | |
| headboard total width | 2090 mm | |
| headboard thickness at center | 220 mm | |
| recommended mattress thickness | 260 mm | |
| floor clearance under frame | 20 mm | |
| side rail width (horizontal thickness) | 200 mm | |
| slat count | 14 | |
| slat thickness | 25 mm | |
| slat spacing | 70 mm | |
| Side Rail Thickness | 40 mm | |
| Center Support Leg Count | Recommended 6legs |
Net weight / load capacity / users / durability
| total static weight capacity (even distribution) | 363 kg | |
|---|---|---|
| recommended sleeper count | 2 adults | |
| net product weight | 59 kg | |
| upholstery abrasion resistance (Martindale) | 30000 cycles | |
| foam padding density (headboard/rails) | 32 kg/m³ | |
| foam rebound rate | 60% | |
| joint static load rating (per corner) | 90 kg | |
| Bed Static Load Reference | 400 kg | |
| Per-slat Load Reference | 60 kg | |
| Recommended Procurement Warranty | Frame 10 years; hardware 5 years; upholstery 2 years |
Core acceptance fields · Panels / hardware / frame / upholstery
| outer upholstery | Textured woven polyester-linen blend fabric, matte beige finish | |
|---|---|---|
| headboard padding | High-density polyurethane foam wrapped with polyester fiber fill | |
| side/foot rail padding | High-density polyurethane foam, rounded bullnose edge shaping | |
| internal frame core | Kiln-dried solid pine and plywood structural frame | |
| mattress support slats | Solid hardwood slats with noise-damping felt strips | |
| center support beam | Reinforced plywood center beam with vertical support legs | |
| connection hardware | Zinc-plated steel bolts, barrel nuts, and corner brackets | |
| hidden support feet | High-impact plastic glides attached to internal frame | |
| Slat Thickness | 15 mm bent plywood or solid timber | |
| Primary Connector Specification | Reference M8-M10 bolts with at least 2 fixing points per corner | |
| Reference Finish / Color Count | Recommended 6timber/upholstery options |
Adjustment / rotation / tilt / mobility / storage features
| mattress support system | Wood slat platform, no box spring required for standard mattress use | |
|---|---|---|
| headboard function | Full-width padded curved backrest for seated reading and back support | |
| edge design | Fully rounded bullnosed upholstered edges on all exposed sides | |
| noise reduction | Felt damping strips between slats and frame to eliminate squeaking | |
| assembly requirement | Flat-pack assembly with included hex key and hardware | |
| floor protection | Non-marring glides on hidden feet to prevent hard floor damage | |
| mattress retention | Recessed platform lip holds mattress in place to prevent sliding | |
| Reference Reassembly Count | Main joints should support 5controlled assembly cycles |
Verified carton / gross weight / assembly / loading data
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Package Dimensions | 2300× 900× 450 mm/carton in 4 cartons | |
| Reference Packaged Gross Weight | 130 kg/set | |
| Reference Packaging Volume | 0.9 m³/set |
Recommended spaces / users / usage modes
| residential primary bedroom | King size sleeping surface for adult primary bedroom suites | |
|---|---|---|
| apartment/condo bedrooms | Low-profile design works for rooms with lower ceiling heights | |
| soft-edged family spaces | Rounded zero-sharp-corner design suitable for homes with young children | |
| neutral palette interior schemes | Beige woven fabric complements warm wood, neutral wall, and linen textile palettes | |
| recommended pairing | Pairs with low-profile nightstands under 500mm height for proportional balance |
EU Market Access Requirements* EN Standards
| EN 1725:1998 | Domestic furniture – Beds and mattresses, safety and strength requirements | |
|---|---|---|
| EN 1021-1:2006 | Upholstered furniture flammability, cigarette ignition resistance |
Standards applicable to China-market projects
| GB/T 3324-2017 | General technical requirements for wooden furniture, applicable to internal wood frame | |
|---|---|---|
| GB 18584-2001 | Limit of harmful substances in wood furniture for interior materials | |
| GB/T 1952.2-2011 | General technical requirements for upholstered furniture, bedding pieces |
This product must meet the following technical requirements: 1. GB/T 3324-2017: General technical requirements for wooden furniture, applicable to internal wood frame; 2. GB 18584-2001: Limit of harmful substances in wood furniture for interior materials; 3. GB/T 1952.2-2011: General technical requirements for upholstered furniture, bedding pieces; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
