| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
| overall dimensions | 2240 x 1830 x 1420 mm | |
|---|---|---|
| headboard height | 1180 mm above floor | |
| mattress support surface height | 350 mm above floor | |
| under-bed storage compartment internal depth | 280 mm | |
| headboard channel tufted panel width | 1650 mm | |
| side rail height above floor | 320 mm | |
| leg height | 120 mm | |
| footboard height above floor | 380 mm | |
| wingback side projection | 80 mm per side | |
| mattress recommended maximum thickness | 300 mm | |
| Side Rail Thickness | 40 mm | |
| Slat Spacing | 80 mm | |
| Center Support Leg Count | Recommended 6legs |
Net weight / load capacity / users / durability
| static total weight capacity | 408 kg | |
|---|---|---|
| net product weight | 53 kg | |
| under-bed storage volume | 0.78 m³ | |
| hydraulic lift mechanism rated opening angle | 45 degrees | |
| slat support static point load | 150 kg per slat | |
| recommended user count | 2 adults | |
| upholstery abrasion resistance (Martindale) | 30000 cycles | |
| foam padding indentation load deflection | 35 ILD | |
| Bed Static Load Reference | 400 kg | |
| Per-slat Load Reference | 60 kg |
Core acceptance fields · Panels / hardware / frame / upholstery
| headboard upholstery | Two-tone light gray and off-white woven polyester fabric | |
|---|---|---|
| headboard internal padding | 30mm thick high-resilience polyurethane foam | |
| bed frame internal structure | E0 grade engineered poplar plywood frame | |
| support slats | 12mm thick solid poplar wood slats, spaced 70mm apart | |
| support legs | 1.2mm thick matte black powder-coated steel legs | |
| lift mechanism | Dual hydraulic gas struts with 1000N lift force per strut | |
| storage compartment lining | Non-woven dust-proof fabric lining | |
| hardware connectors | Zinc-plated steel bolt and barrel nut connectors | |
| decorative headboard trim | Brushed gold-tone metal accent strip | |
| seam construction | Reinforced polyester stitching with 8mm seam pitch | |
| Slat Thickness | 15 mm bent plywood or solid timber | |
| Primary Connector Specification | Reference M8-M10 bolts with at least 2 fixing points per corner |
Adjustment / rotation / tilt / mobility / storage features
| lift-up storage access | Footboard mounted D-pull handle activates dual gas struts to lift mattress platform | |
|---|---|---|
| mattress anti-slip design | Metal retention bar at head of slat platform prevents mattress shifting | |
| noise-reduction slat mounting | Plastic slat caps isolate wood slats from metal frame to eliminate squeaks | |
| wingback headboard support | Padded side wings provide back support for seated reading/bed use | |
| knock-down assembly | Frame disassembles into flat components for transport, requires included hex key assembly | |
| floor protection | Non-marking plastic glides on leg bases prevent hard floor scratching | |
| soft-close lift mechanism | Gas struts lower platform gently without slamming | |
| Reference Reassembly Count | Main joints should support 5controlled assembly cycles |
Verified carton / gross weight / assembly / loading data
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Package Dimensions | 2300× 900× 450 mm/carton in 4 cartons | |
| Reference Packaged Gross Weight | 130 kg/set | |
| Reference Packaging Volume | 0.9 m³/set |
Recommended spaces / users / usage modes
| residential master bedroom | Fits standard queen size bedroom layouts with matching nightstands | |
|---|---|---|
| contemporary guest bedroom | Provides enclosed storage for guest linens and bedding | |
| apartment/condo living | Integrated under-bed storage reduces need for additional dressers in small units | |
| pairing with matching nightstands | Coordinates with two-drawer upholstered nightstands for unified bedroom set | |
| low-ceiling bedrooms | 1420mm total headboard height avoids visual crowding in rooms with lower ceiling heights |
EU Market Access Requirements* EN Standards
| EN 1725:1998 | Domestic furniture – Beds and mattresses – Safety requirements and test methods | |
|---|---|---|
| EN 71-3:2019 | Safety of toys – Migration of certain elements, applicable to hardware finish compliance |
Standards applicable to China-market projects
| GB/T 3324-2017 | General technical requirements for wooden furniture, applicable to wood frame components | |
|---|---|---|
| GB 18584-2001 | Indoor decoration material formaldehyde emission limit for wood furniture | |
| GB/T 1952.2-2011 | General technical requirements for upholstered furniture, mattresses and beds |
This product must meet the following technical requirements: 1. GB/T 3324-2017: General technical requirements for wooden furniture, applicable to wood frame components; 2. GB 18584-2001: Indoor decoration material formaldehyde emission limit for wood furniture; 3. GB/T 1952.2-2011: General technical requirements for upholstered furniture, mattresses and beds; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
