Armless Solid Wood Dining Chair with Black Upholstered Seat and Curved Low Back (model DC-AW-001) is listed under hotel guest room chair, with overall dimensions of 520 × 584 × 780 mm and main material of Imported Ash Solid Wood. Load capacity: 200 kg. Certifications: minimalist,Scandinavian,style,armless,fixed,frame,solid,wood,construction,upholstered,seat. This page consolidates 6 groups of specifications and GB / EN standard references, with metric and imperial units. 1 supplier(s) are listed and you can request a quote online.
| Time | Field | Original Value | Corrected Value | Note / Status |
|---|---|---|---|---|
No correction records yet. Found an error? Click the flag at the end of a row to report it. | ||||
Automatic mm / inch conversion · Core engineering specifications
Data source: Structured from factory data; final measured values prevail.
| overall dimensions | 520 x 584 x 780 mm | |
|---|---|---|
| seat height from floor | 510 mm | |
| seat width | 520 mm | |
| seat depth | 508 mm | |
| backrest height above seat | 419 mm | |
| seat cushion thickness | 114 mm | |
| front leg splay width at floor | 520 mm | |
| rear leg splay width at floor | 470 mm | |
| leg taper thickness at floor contact | 25 mm | |
| back rail top radius | 50 mm | |
| seat apron height below seat | 70 mm | |
| Finished Seat Cushion Thickness | 90 mm | |
| Backrest Padding Thickness | 70 mm | |
| Lumbar Support Zone Height | 240 mm | |
| Clear Width Between Armrests | 540 mm |
Net weight / load capacity / users / durability
Data source: Product performance data; verify exact test conditions before procurement.
| net weight per chair | 11 kg | |
|---|---|---|
| static weight capacity | 150 kg | |
| seat foam density | 45 kg/m³ | |
| foam rebound rate | 60% | |
| upholstery abrasion resistance | 30000 cycles | |
| seam stitch pitch | 8 stitches per 30 mm | |
| floor glide scratch resistance | 1000 drag cycles | |
| frame joint static load rating | 200 kg | |
| Seat Foam Density / Rebound Reference | 45 kg/m³ / 65% | |
| Back Foam Density Reference | 38 kg/m³ |
Core acceptance fields · Panels / hardware / frame / upholstery
Data source: Subject to the factory material list and inspection report.
| chair frame | Solid FAS-grade ash-toned hardwood | |
|---|---|---|
| seat cushion fill | High-density polyurethane foam | |
| seat upholstery | Black smooth faux leather | |
| frame finish | Clear matte nitrocellulose lacquer | |
| joinery hardware | Zinc-plated steel corner brackets | |
| foot pads | Non-marking felt floor glides |
Adjustment / rotation / tilt / mobility / storage features
Data source: Functional configuration; the supplier specification prevails.
| seating posture | Fixed upright posture support | |
|---|---|---|
| assembly requirement | Knockdown leg attachment with included hardware | |
| floor protection | Pre-installed felt glides prevent floor scratching | |
| stacking capability | Non-stackable fixed frame design |
Verified carton / gross weight / assembly / loading data
Data source: Reference for export quotations and container planning.
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Carton Dimensions | 850× 420× 720 mm | |
| Reference Packaged Gross Weight | 23 kg/set | |
| Reference Carton Volume | 0.26 m³/set | |
| Indicative 20GP Loading | 135 sets at 85% space utilization |
Recommended spaces / users / usage modes
Data source: Recommended applications based on product form and category.
| residential dining spaces | Pairs with standard 750mm height dining tables for home meal seating | |
|---|---|---|
| commercial cafe seating | Lightweight durable construction suitable for daily restaurant customer use |
EU Market Access Requirements* EN Standards
| EN 12520:2015 | Furniture: strength, durability and safety for domestic seating, applicable for residential dining use | |
|---|---|---|
| EN 16139:2013 | Furniture: strength, durability and safety for non-domestic seating, applicable for restaurant use | |
| EN 1021-1:2014 | Upholstered furniture ignitability resistance for smouldering cigarette source |
Standards applicable to China-market projects
| GB/T 3324-2017 | General technical requirements for wooden furniture, applicable to solid wood frame dining chairs | |
|---|---|---|
| GB/T 16799-2008 | Performance requirements for furniture upholstery leather, applicable to faux leather seat covering | |
| GB 18584-2001 | Indoor decorating materials: limit of harmful substances in wood furniture, required for indoor use |
This product must meet the following technical requirements: 1. GB/T 3324-2017: General technical requirements for wooden furniture, applicable to solid wood frame dining chairs; 2. GB/T 16799-2008: Performance requirements for furniture upholstery leather, applicable to faux leather seat covering; 3. GB 18584-2001: Indoor decorating materials: limit of harmful substances in wood furniture, required for indoor use; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
Admin WhatsApp