Two-Tone Tufted High Wingback Lounge Armchair (model WL-TT-810-TWG) is listed under hotel guest room chair, with overall dimensions of 800 × 927 × 1092 mm and main material of textile crafts. Load capacity: 300 kg. Certifications: modern,wingback,design,upholstered,lounge,seating,two-tone,orange-light,gray,finish,button,tufted,back,fixed,tapered,metal,legs,integrated,curved,armrests,attached,neck,headrest,single-seat,leisure,chair. This page consolidates 6 groups of specifications and GB / EN / ANSI/BIFMA standard references, with metric and imperial units. 1 supplier(s) are listed and you can request a quote online.
| Time | Field | Original Value | Corrected Value | Note / Status |
|---|---|---|---|---|
No correction records yet. Found an error? Click the flag at the end of a row to report it. | ||||
Automatic mm / inch conversion · Core engineering specifications
Data source: Structured from factory data; final measured values prevail.
| Overall dimensions (W x D x H) | 800 x 927 x 1092 mm | |
|---|---|---|
| Seat height (floor to seat top) | 432 mm | |
| Seat width (between armrests) | 559 mm | |
| Seat depth (front edge to back cushion) | 533 mm | |
| Back height (seat surface to wing top) | 762 mm | |
| Armrest height (floor to arm top) | 610 mm | |
| Seat cushion thickness | 130 mm | |
| Back cushion thickness | 130 mm | |
| Headrest cushion dimensions | 450 x 150 x 100 mm | |
| Tapered leg height | 250 mm | |
| Leg spread (front leg outer width) | 680 mm | |
| Wing panel side projection | 120 mm | |
| Armrest width | 80 mm | |
| Finished Seat Cushion Thickness | 90 mm | |
| Backrest Padding Thickness | 70 mm | |
| Lumbar Support Zone Height | 240 mm | |
| Clear Width Between Armrests | 540 mm |
Net weight / load capacity / users / durability
Data source: Product performance data; verify exact test conditions before procurement.
| Recommended static weight capacity | 136 kg | |
|---|---|---|
| Net product weight | 18 kg | |
| Seat foam density | 40 kg/m³ | |
| Foam rebound rate | 60% | |
| Frame static load rating | 300 kg | |
| Powder-coated leg scratch resistance | 500 cycles | |
| Velvet upholstery abrasion resistance | 30000 Martindale cycles | |
| Seam stitch pitch | 8 stitches per 30 mm | |
| Seat Foam Density / Rebound Reference | 45 kg/m³ / 65% | |
| Back Foam Density Reference | 38 kg/m³ |
Core acceptance fields · Panels / hardware / frame / upholstery
Data source: Subject to the factory material list and inspection report.
| Outer shell upholstery | Polyester velvet fabric, burnt orange finish, soft pile | |
|---|---|---|
| Seat/back/headrest upholstery | Polyester velvet fabric, light gray finish, soft pile | |
| Inner load-bearing frame | 18 mm thick engineered plywood with reinforced corner joints | |
| Seat and back fill | High-density polyurethane foam wrapped with 20 mm polyester fiber batting | |
| Support legs | 30 mm diameter powder-coated light gray tapered steel tubes with anti-scratch floor pads | |
| Back cushion hardware | Stainless steel tufting buttons securing back cushion to frame |
Adjustment / rotation / tilt / mobility / storage features
Data source: Functional configuration; the supplier specification prevails.
| Back support structure | Fixed high wingback design with wrap-around side panels for lateral head and shoulder support | |
|---|---|---|
| Seat configuration | Fixed cushioned seat with integrated padded armrests for relaxed lounge posture | |
| Head support | Attached padded neck headrest positioned for upright reading or relaxation posture | |
| Floor protection | Non-slip anti-scratch plastic foot pads on each leg to prevent hard floor damage |
Verified carton / gross weight / assembly / loading data
Data source: Reference for export quotations and container planning.
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Carton Dimensions | 850× 420× 720 mm | |
| Reference Packaged Gross Weight | 23 kg/set | |
| Reference Carton Volume | 0.26 m³/set | |
| Indicative 20GP Loading | 135 sets at 85% space utilization |
Recommended spaces / users / usage modes
Data source: Recommended applications based on product form and category.
| Commercial high-rise lounge areas | Suitable for office reception zones, sky lounge waiting areas, and break spaces | |
|---|---|---|
| Residential living and reading nooks | Ideal for home living rooms, bedroom reading corners, and accent seating in open-plan spaces |
EU Market Access Requirements* EN Standards
| EN 12520:2015 | Domestic and contract seating strength, durability and safety requirements | |
|---|---|---|
| EN 1021-1:2014 | Upholstered furniture ignition resistance to smouldering cigarette sources | |
| EN 1021-2:2014 | Upholstered furniture ignition resistance to match flame equivalent sources |
US and Canada office-furniture standards
| ANSI/BIFMA X5.4-2020 | Lounge and public seating performance standard for commercial deployment | |
|---|---|---|
| ANSI/BIFMA X7.1-2021 | Standard for formaldehyde and TVOC emissions from office/lounge furniture |
Standards applicable to China-market projects
| GB/T 3324-2017 | General technical requirements for wooden furniture, applicable to inner frame quality inspection | |
|---|---|---|
| GB/T 1952.1-2012 | Upholstered furniture sofa/chair safety and performance requirements, applicable to structural testing | |
| GB 18584-2001 | Indoor decorating materials limit of harmful substances in wooden furniture, applicable to emissions | |
| GB 20286-2006 | Fire retardant requirements for upholstered furniture in public spaces, for contract deployment |
This product must meet the following technical requirements: 1. GB/T 3324-2017: General technical requirements for wooden furniture, applicable to inner frame quality inspection; 2. GB/T 1952.1-2012: Upholstered furniture sofa/chair safety and performance requirements, applicable to structural testing; 3. GB 18584-2001: Indoor decorating materials limit of harmful substances in wooden furniture, applicable to emissions; 4. GB 20286-2006: Fire retardant requirements for upholstered furniture in public spaces, for contract deployment; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
Admin WhatsApp