| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
| Overall set footprint | 3600 x 2400 x 720 mm | |
|---|---|---|
| Three-seat sofa dimensions | 2285 x 920 x 690 mm | |
| Single armchair dimensions per unit | 875 x 920 x 690 mm | |
| Coffee table dimensions | 1400 x 770 x 460 mm | |
| Seat height from floor | 420 mm | |
| Seat depth for all seating units | 600 mm | |
| Square back cushion size | 600 x 600 x 120 mm | |
| Cylindrical arm bolster size | 180 mm diameter x 480 mm length | |
| Coffee table lower shelf height | 200 mm | |
| Sofa leg taper angle | 8 degrees outward | |
| Armrest top height from seat | 200 mm | |
| Finished Seat Cushion Thickness | 90 mm | |
| Backrest Padding Thickness | 70 mm | |
| Lumbar Support Zone Height | 240 mm | |
| Clear Width Between Armrests | 540 mm |
Net weight / load capacity / users / durability
| Total set net weight | 220 kg | |
|---|---|---|
| Seat static load capacity per position | 150 kg | |
| Total recommended seating capacity | 5 persons | |
| Seat foam density | 40 kg/m³ | |
| Seat foam resilience rate | 45% | |
| Wood frame moisture content | 12% | |
| Structural service life under normal use | 10 years | |
| Seat Foam Density / Rebound Reference | 45 kg/m³ / 65% | |
| Back Foam Density Reference | 38 kg/m³ | |
| Upholstery Thickness / Abrasion Reference | 1.4 mm / 50000 cycles |
Core acceptance fields · Panels / hardware / frame / upholstery
| Load-bearing frame | Solid hardwood with walnut-toned clear lacquer finish, mortise and tenon joinery | |
|---|---|---|
| Seat deck support | 12 mm thick multilayer birch plywood panel | |
| Seat cushion fill | High-resilience polyurethane foam, wrapped in 200g polyester batting | |
| Back cushion fill | Blown polyester fiber fill with soft foam core | |
| Upholstery fabric | Beige linen-blend woven fabric, 350g/m² weight, stain-resistant treatment | |
| Cushion covers | Removable fabric covers secured with hidden zippers and hook-and-loop fasteners | |
| Coffee table top and shelf | Solid wood veneer over MDF core with matching walnut lacquer finish | |
| Legs and stretchers | Solid tapered wood legs with cross stretchers for lateral stability | |
| Joinery hardware | Zinc-plated steel corner brackets supplementing mortise and tenon joints | |
| Seam construction | Reinforced stitched seams with 8 mm stitch pitch | |
| Wood finish | UV-cured clear lacquer, scratch-resistant, low-VOC formulation | |
| Seat Internal Support Board Thickness | 14 mm bent plywood or equivalent support board |
Adjustment / rotation / tilt / mobility / storage features
| Cushion cover removal | All seat and back cushion covers unzip for separate dry cleaning | |
|---|---|---|
| Fixed back support | Non-reclining fixed backrest set to 25-degree lumbar support angle | |
| Structural stability | Splayed tapered legs with cross stretchers eliminate wobble on flat floors | |
| Coffee table storage | Open lower shelf provides accessible display and storage space for common items | |
| Modular arrangement | Freestanding units support flexible symmetrical or asymmetrical layout adjustments | |
| Bolster positioning | Cylindrical arm bolsters are non-fixed for adjustable arm support placement | |
| Surface protection | Stain-resistant fabric finish repels liquid spills for easier spot cleaning | |
| Floor protection | Felt pads pre-installed on leg bases to prevent hard floor scratching | |
| Backrest fixed recline angle | 25 degrees from vertical | |
| Recline Angle / Lock Reference | 125° with 3suggested lock positions | |
| Tilt Tension User-weight Range | Reference adjustment coverage 120 kg | |
| Height Adjustment Stroke | 100 mm continuous travel |
Verified carton / gross weight / assembly / loading data
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Carton Dimensions | 850× 420× 720 mm | |
| Reference Packaged Gross Weight | 23 kg/set | |
| Reference Carton Volume | 0.26 m³/set | |
| Indicative 20GP Loading | 135 sets at 85% space utilization | |
| Indicative 40HQ Loading | 320 sets at 85% space utilization |
Recommended spaces / users / usage modes
| Residential living room | Suitable for open-concept living rooms as primary conversation seating for households | |
|---|---|---|
| Tea room and lounge | Ideal for private tea tasting spaces with matching low coffee table for tea service | |
| Office reception area | Applicable for executive reception lounges to create a calm, hospitable guest waiting space | |
| Villa and boutique lounge | Suited for high-end residential or boutique hotel lobbies seeking classic oriental aesthetic | |
| Family multi-generational use | Wide, supportive seats accommodate adults and seniors for extended sitting without adjustment needed | |
| Small meeting space | Works for informal small group meetings of up to 5 people in cultural or creative offices | |
| Recommended Matching Desk Size | 2.4 m executive desk | |
| Reference Daily Use Duration | 8 hours/day; confirm by ergonomic testing |
EU Market Access Requirements* EN Standards
Standards applicable to China-market projects
| GB 18584-2021 | Indoor decorating and refurbishing materials - Limit of formaldehyde release for wooden furniture | |
|---|---|---|
| GB/T 3324-2017 | General technical requirements for wooden furniture | |
| GB/T 3920-2008 | Textiles - Tests for color fastness - Color fastness to rubbing | |
| GB/T 1952.1-2012 | Furniture - Sofas | |
| GB/T 29894-2013 | General requirements for furniture hardware | |
| Fabric abrasion resistance | 20000 cycles |
This product must meet the following technical requirements: 1. GB 18584-2021: Indoor decorating and refurbishing materials - Limit of formaldehyde release for wooden furniture; 2. GB/T 3324-2017: General technical requirements for wooden furniture; 3. GB/T 3920-2008: Textiles - Tests for color fastness - Color fastness to rubbing; 4. GB/T 1952.1-2012: Furniture - Sofas; 5. GB/T 29894-2013: General requirements for furniture hardware; 6. Fabric abrasion resistance: 20000 cycles; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
