| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
| 3-seater sofa overall dimensions | 2100 x 820 x 750 mm | |
|---|---|---|
| Single armchair overall dimensions | 850 x 820 x 750 mm | |
| Seat height from floor | 420 mm | |
| Seat depth (usable) | 580 mm | |
| Backrest height above seat | 330 mm | |
| Armrest height above seat | 180 mm | |
| Armrest width | 120 mm | |
| Chrome frame leg cross-section | 25 x 25 mm | |
| Leg height (floor to sofa base) | 150 mm | |
| Side table (set accessory) overall dimensions | 600 x 600 x 550 mm | |
| Seat cushion thickness | 120 mm | |
| Matching coffee table (visible accessory) overall dimensions | 1200 x 700 x 450 mm | |
| Matching side table (visible accessory) overall dimensions | 600 x 600 x 550 mm | |
| Finished Seat Cushion Thickness | 90 mm | |
| Backrest Padding Thickness | 70 mm | |
| Lumbar Support Zone Height | 240 mm |
Net weight / load capacity / users / durability
| 3-seater sofa net weight | 65 kg | |
|---|---|---|
| 3-seater sofa static seat load capacity | 450 kg | |
| Foam cushion density | 45 kg/m³ | |
| Upholstery abrasion resistance | 50000 Martindale cycles | |
| Recommended maximum occupancy | 5 persons | |
| Foam cushion indentation load deflection | 45 kg/m³ | |
| Stitching seam strength | 120 N | |
| Cushion sag resistance | 90% foam rebound rate | |
| Seat Foam Density / Rebound Reference | 45 kg/m³ / 65% | |
| Back Foam Density Reference | 38 kg/m³ |
Core acceptance fields · Panels / hardware / frame / upholstery
| Upholstery material | Burgundy PU faux leather, 1.2mm thickness | |
|---|---|---|
| Cushion core | High-density polyurethane foam, 120mm thick seat foam | |
| Internal frame | 1.2mm thick kiln-dried hardwood + plywood composite frame | |
| External support frame | Polished chrome-plated cold-rolled steel square tube | |
| Backrest tufting | Pull-button tufted detail, matching burgundy upholstery buttons | |
| Foot glides | Non-marking rubber floor protection pads | |
| Stitching specification | 7 stitches per 30mm seam length, matching burgundy thread | |
| Seat suspension | Sinuous spring support under seat foam | |
| Seat cushion core | High-density polyurethane foam, 120mm thick, 45kg/m³ density | |
| Backrest cushion core | High-density polyurethane foam, 80mm thick, 40kg/m³ density | |
| Internal load-bearing frame | 1.2mm thick kiln-dried hardwood + 15mm plywood composite frame, 12% moisture content | |
| Backrest and seat tufting | Pull-button tufted detail, matching burgundy upholstery covered buttons |
Adjustment / rotation / tilt / mobility / storage features
| Seating configuration | Fixed modular set consisting of one 3-seater sofa and two matching single armchairs | |
|---|---|---|
| Cushion design | Fixed attached seat and back cushions, no removable covers | |
| Frame finish protection | Mirror-polished chrome frame is rust-resistant, suitable for indoor climate-controlled environments | |
| Floor protection | Integrated rubber glides at all leg bases prevent scratching hard flooring | |
| Back support design | Button-tufted backrest distributes foam evenly to provide consistent lumbar support | |
| Assembly requirement | Sofa units ship pre-assembled, only feet require tightening during installation | |
| Configuration flexibility | Separate seating units can be rearranged to fit different reception space layouts | |
| Cleaning compatibility | Smooth PU upholstery surface supports wipe-clean maintenance with 70% isopropyl alcohol disinfectant, no water penetration through sealed seams | |
| Recline Angle / Lock Reference | 125° with 3suggested lock positions | |
| Tilt Tension User-weight Range | Reference adjustment coverage 120 kg | |
| Height Adjustment Stroke | 100 mm continuous travel | |
| Rotation / Mobility Configuration | 360° swivel with 5-caster multidirectional movement |
Verified carton / gross weight / assembly / loading data
| Total packaged carton count | 3 cartons | |
|---|---|---|
| 3-seater sofa carton dimensions | 2150 x 870 x 600 mm | |
| Single armchair carton dimensions | 900 x 870 x 600 mm | |
| Total shipment gross weight | 150 kg | |
| Total shipment CBM | 2.06 m³ | |
| On-site assembly time | 20 minutes | |
| 20ft GP container loading quantity | 18 sets | |
| 40ft HQ container loading quantity | 45 sets | |
| Reference Package Count | 1 set / 2 cartons | |
| Reference Assembly Time | 40 minutes per set |
Recommended spaces / users / usage modes
| Corporate office reception areas | Suitable for waiting zones near entryways, provides formal seating for 5 visitors with professional appearance | |
|---|---|---|
| Executive private offices | Configurable for placement in front of executive desks to accommodate meeting guests | |
| Lounge and break areas | Durable upholstery and supportive cushioning support extended casual seating for employees | |
| Hotel and banking lobbies | Scratch-resistant metal frame and heavy-duty upholstery withstand high foot traffic public space use | |
| Small meeting rooms | Modular units can be arranged around a coffee table for informal small group discussions | |
| Employee lounge and break areas | 50000 Martindale abrasion rating and high-resilience cushioning support 8 hours of daily casual seating for employees, wipe-clean surface simplifies food and drink spill maintenance | |
| Medical and professional service waiting rooms | Disinfectant-compatible upholstery supports regular sanitization between patient/client visits, fixed cushions prevent debris trapping for improved hygiene compliance | |
| Recommended Matching Desk Size | 2.4 m executive desk |
EU Market Access Requirements* EN Standards
| EN 1022 | 2018 Furniture – Seating – Determination of stability, applicable for seating unit tip resistance testing |
|---|
Standards applicable to China-market projects
This product must meet the following technical requirements: 1. Technical standards and test reports must be supplied during tender or purchase confirmation; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
