| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
| Full set overall footprint | 3200 x 2200 x 850 mm | |
|---|---|---|
| 3-seater sofa overall size | 2200 x 880 x 850 mm | |
| Single armchair overall size | 900 x 880 x 850 mm | |
| Coffee table overall size | 1200 x 600 x 450 mm | |
| Seat height from floor | 430 mm | |
| Seat cushion thickness | 120 mm | |
| Backrest height above seat | 420 mm | |
| Armrest width per side | 120 mm | |
| Armrest height from floor | 620 mm | |
| Leg height for all seating units | 150 mm | |
| Clearance under seating units | 130 mm | |
| Coffee table top thickness | 12 mm | |
| 2-seater central sofa overall size | 2200 x 880 x 850 mm | |
| Back Cushion Thickness | 160 mm | |
| Leg Height / Floor Clearance | 160 mm |
Net weight / load capacity / users / durability
| Per-seat static load capacity | 150 kg | |
|---|---|---|
| Total set net weight | 185 kg | |
| Recommended total user capacity | 5 persons | |
| Cushion compression recovery rate | 92% | |
| Seam stitching tensile strength | 80 N | |
| Metal frame rust resistance rating | Grade 2 | |
| Surface abrasion resistance (upholstery) | 50000 cycles | |
| Seat Foam Density / Rebound | 40 kg/m³ / 60% | |
| Upholstery Abrasion Reference | Fabric 60000 cycles; leather-class cover 1.4 mm | |
| Per-seat Load Reference | 130 kg/seat |
Core acceptance fields · Panels / hardware / frame / upholstery
| Seat outer frame/armrest upholstery | Caramel brown 1.2mm thick PU leather | |
|---|---|---|
| Seat cushion/backrest upholstery | Light grey 1.2mm thick PU leather | |
| Internal seat cushion fill | 40kg/m³ high-density polyurethane foam | |
| Internal backrest fill | 30kg/m³ medium-density polyurethane foam | |
| Seating inner support frame | 25mm thick kiln-dried solid hardwood frame | |
| Sofa support legs | 25mm diameter matte black powder-coated carbon steel tapered legs | |
| Coffee table top | 12mm thick sintered stone with polished marble-look finish | |
| Coffee table support frame | 20x20mm matte black powder-coated carbon steel slatted frame | |
| Seat support suspension | 80mm wide nylon webbing suspension | |
| Stitching hardware | High-tensile polyester upholstery thread, 8 stitches per inch | |
| Leg foot pads | 5mm thick non-marking TPE rubber pads fitted to bottom of all sofa and table legs | |
| Timber Frame Section / Moisture | Primary section ≥30 × 50 mm; recommended moisture 12% |
Adjustment / rotation / tilt / mobility / storage features
| Seating configuration | Fixed 1+2+1 modular arrangement with central coffee table | |
|---|---|---|
| Back support | Segmented tufted fixed backrest with two lumbar support zones per seat | |
| Surface maintenance | Stain-resistant PU leather upholstery and sintered stone table top | |
| Floor protection | Non-marking rubber foot pads fitted to all metal legs | |
| Cleaning access | 130mm open clearance under all seating and table units | |
| Structural stability | Cross-braced metal table frame and fixed hardwood sofa joints | |
| Cushion Service Configuration | Recommended 2removable/replaceable cushion methods |
Verified carton / gross weight / assembly / loading data
| Total number of shipping packages | 5 pcs | |
|---|---|---|
| Largest package dimensions (3-seater sofa) | 2230 x 910 x 620 mm | |
| Per-single chair package dimensions | 930 x 910 x 620 mm | |
| Coffee table package dimensions | 1250 x 650 x 120 mm (top) / 1220 x 620 x 200 mm (frame) | |
| Total shipping gross weight | 220 kg | |
| Total shipping volume (CBM) | 2.3 CBM | |
| On-site assembly time | 45 minutes | |
| 40ft HQ container loading capacity | 52 sets | |
| Product warranty period | 3 years | |
| Reference Package Count | 1 set / 2 cartons |
Recommended spaces / users / usage modes
| Corporate office reception lobbies | Formal two-tone professional appearance, sufficient 5-person seating capacity for waiting visitors, durable surfaces for high daily foot traffic | |
|---|---|---|
| Executive office meeting zones | Compact 3-piece layout fits in secondary meeting areas adjacent to executive offices, suitable for small informal client discussions without large conference tables | |
| Co-working space common areas | Stain-resistant easy-clean surfaces and durable construction withstand frequent use by rotating members and guests, modular layout can be arranged against walls or in open zones | |
| Small business waiting areas | Compact footprint fits in entry zones of law firms, consulting offices, medical clinics or boutique studios without overwhelming limited space | |
| Hotel executive lounge areas | Neutral color palette and commercial grade durability align with hospitality lounge requirements, paired with matching coffee table for beverage and reading material placement | |
| Recommended complementary configuration | Pair with 2400x1600mm low-pile office area rug as shown in imagery, plus matching narrow side table at sofa end for display or additional surface space |
EU Market Access Requirements* EN Standards
| EN 13761:2008 Office furniture - Visitor chairs | Applies to seating stability, static load, durability and edge safety requirements for all reception seating units, suitable for non-domestic office visitor use | |
|---|---|---|
| EN 15372:2008 Furniture - Strength, durability and safety - Requirements for non-domestic tables | Applies to coffee table load capacity, stability and surface durability for high-traffic commercial reception areas | |
| EN 1022:2018 Domestic and non-domestic seating - Determination of stability | Applies to tip-over resistance testing for all sofa units, ensuring no forward or sideways tipping during normal use |
US and Canada office-furniture standards
| ANSI/BIFMA X5.11-2015 Lounge Seating - Tests | Applies to static load, fatigue durability, armrest strength and leg strength testing for commercial lounge sofas, suitable for high-traffic office reception areas | |
|---|---|---|
| ANSI/BIFMA X5.5-2021 Desk Products - Tests | Applies to coffee table top load, edge load, stability and surface durability requirements as a reception ancillary table |
Standards applicable to China-market projects
| GB/T 3324-2017 General technical requirements for wooden furniture | Applies to solid wood inner frame and structural stability acceptance, requiring no loose joints, no sharp edges, frame load meeting static load test requirements | |
|---|---|---|
| GB 18584-2001 Indoor decorating and refurbishing materials - Limit of harmful substances of wood based furniture | Applies to formaldehyde and VOC emission limits for all frame, foam and adhesive components, requiring emission levels below standard limits for indoor use | |
| GB/T 16799-2008 Upholstery leather for furniture | Applies to abrasion resistance, color fastness and tear strength of PU/leather upholstery, meeting commercial furniture durability requirements | |
| GB/T 3325-2017 General technical requirements for metal furniture | Applies to powder-coated metal legs and coffee table frame, requiring corrosion resistance, welding strength and coating adhesion requirements |
This product must meet the following technical requirements: 1. GB/T 3324-2017 General technical requirements for wooden furniture: Applies to solid wood inner frame and structural stability acceptance, requiring no loose joints, no sharp edges, frame load meeting static load test requirements; 2. GB 18584-2001 Indoor decorating and refurbishing materials - Limit of harmful substances of wood based furniture: Applies to formaldehyde and VOC emission limits for all frame, foam and adhesive components, requiring emission levels below standard limits for indoor use; 3. GB/T 16799-2008 Upholstery leather for furniture: Applies to abrasion resistance, color fastness and tear strength of PU/leather upholstery, meeting commercial furniture durability requirements; 4. GB/T 3325-2017 General technical requirements for metal furniture: Applies to powder-coated metal legs and coffee table frame, requiring corrosion resistance, welding strength and coating adhesion requirements; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
