Modern Square Dark Top Chrome Open Base Coffee Table (model CT-SQ-8046-CHR) is listed under Faux Leather Sofa, with overall dimensions of 800 × 800 × 460 mm and main material of artificial leather. Load capacity: 113 kg. Certifications: Modern,minimalist,style,open,cantilever,frame,fixed,non-adjustable,structure. This page consolidates 6 groups of specifications and GB / EN / ANSI/BIFMA standard references, with metric and imperial units. 1 supplier(s) are listed and you can request a quote online.
| Time | Field | Original Value | Corrected Value | Note / Status |
|---|---|---|---|---|
No correction records yet. Found an error? Click the flag at the end of a row to report it. | ||||
Automatic mm / inch conversion · Core engineering specifications
Data source: Structured from factory data; final measured values prevail.
| Overall dimensions | 800 x 800 x 460 mm | |
|---|---|---|
| Tabletop thickness | 18 mm | |
| Frame tube section | 50 x 25 mm | |
| Frame tube wall thickness | 1.5 mm | |
| Under-table floor clearance | 412 mm | |
| Frame outer width | 760 mm | |
| Frame outer depth | 760 mm | |
| Horizontal base rail height | 30 mm | |
| Corner radius of tabletop | 5 mm | |
| Vertical leg width | 50 mm | |
| Surface usable area | 0.64 sqm | |
| Finished Top Thickness | 45 mm | |
| Effective Knee Clearance | 680 mm high and 900 mm wide per main seat | |
| Leg / Support Section | 80 mm main section with 2 mm metal wall | |
| Cable Opening Size | 80 mm diameter; cable tray depth 120 mm |
Net weight / load capacity / users / durability
Data source: Product performance data; verify exact test conditions before procurement.
| Tabletop static distributed load | 113 kg | |
|---|---|---|
| Point load capacity at center | 30 kg | |
| Chrome frame finish salt spray resistance | 48 hours | |
| Surface abrasion resistance | 300 revolutions | |
| Frame joint static shear strength | 800 N | |
| Product net weight | 30 kg | |
| Leveling adjustment range per foot | 10 mm | |
| Top Static Load Reference | 150 kg uniformly distributed | |
| Drawer Slide Load / Life | 45 kg/pair; 50000 cycles | |
| Hinge Opening Life | Acceptance target 80000 cycles |
Core acceptance fields · Panels / hardware / frame / upholstery
Data source: Subject to the factory material list and inspection report.
| Tabletop | 18mm dark grey engineered stone, matte finish, polished edge | |
|---|---|---|
| Frame structure | Chrome-plated cold-rolled steel tubular open frame, polished finish | |
| Connector hardware | Zinc-plated steel M6 bolts and cross dowels | |
| Foot pads | Non-marking black TPE rubber pads at leg bases | |
| Surface coating (frame) | 0.02mm thick electroplated chrome layer | |
| Primary Panel Thickness | 25 mm; load-bearing top may use 40 mm composite build-up |
Adjustment / rotation / tilt / mobility / storage features
Data source: Functional configuration; the supplier specification prevails.
| Assembly requirement | Flat-pack partial assembly with included hex key and hardware | |
|---|---|---|
| Leveling adjustment | Threaded TPE feet rotate to adjust for uneven floor surfaces | |
| Surface functionality | Smooth non-porous top resists liquid spills for lounge beverage service | |
| Open base access | Cantilever open frame allows unobstructed leg room for seated users around the table |
Verified carton / gross weight / assembly / loading data
Data source: Reference for export quotations and container planning.
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Package Dimensions | 2100× 1100× 300 mm | |
| Reference Packaged Gross Weight | 90 kg/set in 2 cartons | |
| Reference Packaging Volume | 0.55 m³/set |
Recommended spaces / users / usage modes
Data source: Recommended applications based on product form and category.
| Office reception lounge areas | Low height provides shared surface for visitor seating groups | |
|---|---|---|
| Residential living room spaces | Small footprint fits compact conversational seating arrangements |
EU Market Access Requirements* EN Standards
| EN 15372:2016 | Furniture – Strength, durability and safety for non-domestic tables | |
|---|---|---|
| EN 12521:2015 | Furniture – Strength, durability and safety for domestic tables |
US and Canada office-furniture standards
| ANSI/BIFMA X5.5-2021 | Desk Products – Tests for safety, strength, durability |
|---|
Standards applicable to China-market projects
| GB/T 3324-2017 | General technical requirements for wooden furniture, applicable for tabletop performance | |
|---|---|---|
| GB/T 3325-2017 | Metal furniture general technical requirements, applicable for steel frame structure |
This product must meet the following technical requirements: 1. GB/T 3324-2017: General technical requirements for wooden furniture, applicable for tabletop performance; 2. GB/T 3325-2017: Metal furniture general technical requirements, applicable for steel frame structure; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
Admin WhatsApp