| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
| Three-seater sofa overall dimensions | 1900 x 750 x 780 mm | |
|---|---|---|
| Single armchair overall dimensions | 850 x 750 x 780 mm | |
| Three-seater sofa seat dimensions | 1600 x 550 mm | |
| Single armchair seat dimensions | 550 x 550 mm | |
| Seat height from floor | 420 mm | |
| Backrest height above seat | 360 mm | |
| Armrest height above floor | 620 mm | |
| Coffee table overall dimensions | 1200 x 600 x 450 mm | |
| Side end table overall dimensions | 600 x 600 x 500 mm | |
| Tabletop thickness | 25 mm | |
| Steel frame leg cross-section | 50 x 50 mm | |
| Floor clearance under seating | 120 mm | |
| Three-seater sofa net seat dimensions | 1600 x 550 mm | |
| Rectangular coffee table overall dimensions | 1200 x 600 x 450 mm | |
| Finished Seat Cushion Thickness | 90 mm | |
| Backrest Padding Thickness | 70 mm |
Net weight / load capacity / users / durability
| Three-seater sofa total static load capacity | 450 kg | |
|---|---|---|
| Set total net weight (all pieces) | 145 kg | |
| Foam padding indentation load deflection | 40 kg/m³ | |
| Seating foam thickness (cushion) | 80 mm | |
| Backrest foam thickness | 50 mm | |
| Seating cushion foam density | 45 kg/m³ | |
| Seat cushion padding thickness | 80 mm | |
| Backrest padding thickness | 50 mm | |
| PU upholstery abrasion resistance | 50000 Martindale cycles | |
| Seat Foam Density / Rebound Reference | 45 kg/m³ / 65% |
Core acceptance fields · Panels / hardware / frame / upholstery
| Seating upholstery | 1.0mm thick beige polyurethane (PU) faux leather, with button-tufted grid detailing on seat and back cushions | |
|---|---|---|
| Seat internal frame | 15mm thick multilayer hardwood plywood, stapled and glued joint construction | |
| Cushion padding | High-density polyurethane foam, wrapped with 20mm soft polyester fiber batting for smooth upholstery appearance | |
| Seating support frames | Polished chrome-plated 1.2mm thick square steel tube, cantilever design with integrated armrest support | |
| Table frame and legs | Polished chrome-plated 1.0mm thick square steel tube, open square base design matching seating frame finish | |
| Tabletops | 25mm thick particleboard core with walnut wood grain melamine veneer, sealed edge banding | |
| Tufting hardware | Stainless steel button caps secured with internal twine to maintain uniform tufted grid pattern | |
| Floor glides | Injection-molded nylon non-marking glides fitted to bottom of steel frames, to prevent floor scratching on hard tile or polished floors | |
| Seat internal support frame | 15mm thick multilayer hardwood plywood, stapled and glued dado joint construction | |
| Cushion core padding | 45kg/m³ high-density polyurethane foam, wrapped with 20mm soft polyester fiber batting for smooth upholstery appearance and reduced edge firmness | |
| Table support frames and legs | Polished chrome-plated 1.0mm thick square steel tube, open U-shaped sled base design matched to seating frame finish, welded cross-brace support | |
| Tufting retention hardware | Stainless steel button caps secured with 1mm diameter polyester internal twine, tensioned to maintain uniform 50mm tufted grid pattern |
Adjustment / rotation / tilt / mobility / storage features
| Seating design | Fixed-position upholstered seating with no recline, swivel, or height adjustment, optimized for high-traffic reception waiting areas | |
|---|---|---|
| Table configuration | Fixed-height accent tables with flat scratch-resistant melamine surfaces, designed for placement in front of seating to hold beverages, reading materials, and decor | |
| Set layout flexibility | Modular 3-piece seating plus 2 tables allow flexible arrangement for 25sqm reception areas, supporting linear, L-shape, or conversational layouts | |
| Cleaning and maintenance | Smooth non-porous PU upholstery and melamine tabletops allow wipe-down cleaning with standard commercial disinfectants, suitable for high-use public spaces | |
| Cantilever frame flex | Steel cantilever frames provide controlled slight flex when seated, improving comfort without structural sagging over long-term use | |
| Cable management | Open under-table and under-seat clearance allows easy routing of power or charging cables if needed for guest device charging | |
| Floor protection | Nylon glides reduce friction and prevent scuff marks on polished tile, marble, or luxury vinyl flooring common in premium reception areas | |
| Seating positioning design | Fixed-position upholstered seating with no recline, swivel, or height adjustment, optimized for high-traffic reception waiting areas with rigid welded steel frame construction | |
| Table surface functionality | Fixed-height accent tables with flat scratch-resistant melamine surfaces, positioned at seated elbow height for placement of beverages, reading materials, and decorative items | |
| Layout configuration flexibility | Independent 5-piece set allows flexible arrangement for 25sqm reception areas, supporting linear, L-shape, or circular conversational layouts without required connecting hardware between units | |
| Routine cleaning suitability | Smooth non-porous PU upholstery and sealed melamine tabletops allow 1-minute wipe-down cleaning with standard commercial quaternary ammonium disinfectants, suitable for high-use public spaces | |
| Cantilever frame comfort flex | Steel sled cantilever frames provide 5mm controlled vertical flex when occupied, improving seated comfort without structural sagging over long-term repeated use |
Verified carton / gross weight / assembly / loading data
| Total shipping cartons | 5 cartons | |
|---|---|---|
| Three-seater sofa carton dimensions | 1950 x 800 x 350 mm | |
| Single armchair carton dimensions | 900 x 800 x 380 mm | |
| Table carton dimensions | 1250 x 650 x 120 mm (coffee table), 650 x 650 x 100 mm (side table) | |
| Total shipment gross weight | 175 kg | |
| Total shipment volume | 1.42 CBM | |
| On-site assembly time | 60 minutes | |
| 40HQ container loading quantity | 42 sets | |
| Packaging materials | 5-layer corrugated cardboard cartons, expanded polystyrene corner protection, polyethylene film wrap, labeled hardware kits with assembly instructions | |
| Reference Package Count | 1 set / 2 cartons |
Recommended spaces / users / usage modes
| Premium office reception areas | Suitable for corporate lobby, executive waiting, and client greeting areas, with a polished professional appearance that complements modern office design | |
|---|---|---|
| Automotive showroom customer waiting zones | Ideal for car dealership guest waiting areas, as seen in image context, with durable surfaces that resist daily wear from high visitor turnover | |
| Small business lounge and break areas | Appropriate for staff break rooms, informal meeting nooks, and boutique business waiting spaces for up to 5 guests at a time | |
| Recommended complementary configuration | Pair with floor lamps, decorative vases, and slim open shelving units as shown in reference layout to create a polished, welcoming reception environment | |
| Flooring compatibility | Designed for use on polished tile, marble, luxury vinyl, and low-pile commercial carpet surfaces, with non-marking glides that prevent floor damage | |
| Seating capacity | Supports up to 5 adult guests (3 on three-seater sofa, 1 on each single armchair) for short to medium waiting periods of 90 minutes | |
| Durability target | Engineered for 8 years of regular commercial use in environments with 20+ visitor interactions per day, with minimal maintenance requirements | |
| Corporate office reception lobbies | Suitable for corporate main lobby, executive floor waiting, and client greeting areas, with a polished neutral finish that complements modern minimalist office interior design |
EU Market Access Requirements* EN Standards
| Office seating safety recommendation | EN 16139:2013 | |
|---|---|---|
| Furniture formaldehyde recommendation | EN 13986:2004+A1:2015 | |
| Surface abrasion recommendation | EN 14465:2004 | |
| Non-domestic seating strength recommendation | EN 16139:2013 | |
| Wood panel formaldehyde recommendation | EN 13986:2004+A1:2015 | |
| Upholstery abrasion recommendation | EN 14465:2004 |
US and Canada office-furniture standards
| Seating load recommendation | ANSI/BIFMA X2020 | |
|---|---|---|
| Table performance recommendation | ANSI/BIFMA X2021 | |
| Lounge seating load recommendation | ANSI/BIFMA X2022 | |
| Occasional table performance recommendation | ANSI/BIFMA X2022 |
Standards applicable to China-market projects
| Formaldehyde emission recommendation | GB/T 18580 | |
|---|---|---|
| Upholstered furniture safety recommendation | GB 28007 | |
| Metal furniture coating recommendation | GB/T 3325 | |
| Wood-based panel formaldehyde recommendation | GB/T 18580 | |
| Upholstered public seating safety recommendation | GB 28007 | |
| Metal furniture coating performance recommendation | GB/T 3325 |
This product must meet the following technical requirements: 1. Formaldehyde emission recommendation: GB/T 18580; 2. Upholstered furniture safety recommendation: GB 28007; 3. Metal furniture coating recommendation: GB/T 3325; 4. Wood-based panel formaldehyde recommendation: GB/T 18580; 5. Upholstered public seating safety recommendation: GB 28007; 6. Metal furniture coating performance recommendation: GB/T 3325; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
