4-Piece Gray Faux Leather Office Reception Seating Set with Glass Coffee Table - Dimensions

Submitted	Field	Original	修改后参数	Note / Status
No parameter correction records exist. If you spot inaccurate data, click the flag icon at the end of the corresponding row to submit feedback.

PRODUCT MODULE 01 / 06

Physical Dimensions

Automatic mm / inch conversion · Core engineering specifications

Overall 3-seater sofa dimensions	1850 x 750 x 820 mm
Overall single armchair dimensions	700 x 750 x 820 mm
Overall coffee table dimensions	1200 x 600 x 450 mm
Seat height from floor (all seating units)	420 mm
Seat depth (all seating units)	480 mm
Backrest height above seat (all seating units)	400 mm
Armrest height from floor (all seating units)	650 mm
Coffee table lower shelf clearance	200 mm
Chrome frame tube diameter (seating units)	25 mm
Coffee table top glass thickness	12 mm
Finished Seat Cushion Thickness	90 mm
Backrest Padding Thickness	70 mm
Lumbar Support Zone Height	240 mm
Clear Width Between Armrests	540 mm

PRODUCT MODULE 02 / 06

Weight, Load & Performance

Net weight / load capacity / users / durability

3-seater sofa total weight	48 kg
Single armchair weight	16 kg
Coffee table weight	32 kg
3-seater sofa static load capacity	360 kg
Seat foam density	45 kg/m³
Seat foam thickness	80 mm
Faux leather abrasion resistance	50000 double rubs
Seam stitch pitch	8 stitches per 30mm
Foot pad floor pressure rating	12 kg/cm²
Seat Foam Density / Rebound Reference	45 kg/m³ / 65%

PRODUCT MODULE 03 / 06

Materials & Structure

Core acceptance fields · Panels / hardware / frame / upholstery

Seat and backrest upholstery	Gray matte faux leather (PU leather)
Seating internal cushioning	High-resilience polyurethane foam
Seating support frames	Chrome-plated cold-rolled tubular steel
Frame foot pads	Black non-slip rubber
Coffee table upper and lower tabletops	Black tempered glass
Coffee table support legs	Polished stainless steel square tubing
Coffee table base frame	Black powder-coated steel tubing
Armrest padding	High-density polyurethane foam wrap bonded to upper armrest frame sections, covered in matching faux leather
Seating frame surface finish	Triple-layer chrome plating with 0.15micron nickel undercoat for corrosion resistance
Seat Internal Support Board Thickness	14 mm bent plywood or equivalent support board
Backrest Internal Frame Thickness	14 mm bent plywood/composite reinforced frame
Gas-lift Engineering Specification	Recommended Class 4; outer tube 50 mm; stroke 100 mm

PRODUCT MODULE 04 / 06

Functions & Adjustment

Adjustment / rotation / tilt / mobility / storage features

Cantilever seating flex	Continuous bent steel frame provides mild responsive flex when seated, no tilt or swivel mechanism
Integrated armrest support	Curved chrome frame armrests run continuously from front seat edge to rear back support, providing stable arm rest surface without additional padding
Coffee table lower storage shelf	Fixed black glass lower shelf provides open storage for books, magazines or office supplies, as visible with stacked items in image
Floor protection function	Rubber foot pads on all seating and table frame bases prevent scratching hard flooring and reduce sliding on smooth surfaces
Seating arrangement flexibility	All seating units are freestanding, allowing rearrangement into different reception layouts to suit room size and shape
Surface wipe-clean function	Faux leather upholstery and glass table surfaces can be wiped clean with standard office cleaning products for high-traffic maintenance
Static seating stability	Cantilever frame design has 700mm of front-to-back base span to prevent tipping when users lean back or ingress/egress from seating positions
Recline Angle / Lock Reference	125° with 3 suggested lock positions
Tilt Tension User-weight Range	Reference adjustment coverage 120 kg
Height Adjustment Stroke	100 mm continuous travel
Rotation / Mobility Configuration	360° swivel with 5-caster multidirectional movement

PRODUCT MODULE 05 / 06

Packaging & Logistics

Verified carton / gross weight / assembly / loading data

Total number of shipping packages	4
Sofa shipping carton dimensions	1880 x 620 x 580 mm
Single armchair shipping carton dimensions	730 x 620 x 580 mm
Coffee table shipping carton dimensions	1230 x 630 x 180 mm
Total shipping gross weight	125 kg
Total shipping volume (CBM)	1.35
assembly time	45 minutes
20ft GP container loading quantity	36 sets
40ft HQ container loading quantity	88 sets
Reference Package Count	1 set / 2 cartons

PRODUCT MODULE 06 / 06

Applications & Usage

Recommended spaces / users / usage modes

Corporate office reception areas	Suitable for lobbies and waiting areas, providing formal professional seating for 5 visitors with matching coffee table for documents and refreshments
Executive office waiting zones	Sized to fit in front of executive desks for guest seating, neutral gray color coordinates with most office interior palettes
Conference room breakout areas	Can be arranged for informal meeting breaks, padded upholstery provides extended comfort for longer waiting or discussion sessions
Government or institutional public waiting areas	Durable construction and easy-clean surfaces support high-traffic daily use in public-facing service areas
Small business meeting spaces	Full 4-piece set provides complete seating solution for small offices without requiring separate sourcing of matching tables and chairs
Corporate office reception lobbies	Suitable for main entry waiting areas, providing formal professional seating for 5 visitors with a matching coffee table for documents, drinkware and reading materials
Executive office guest waiting zones	Sized to fit in the open area in front of executive desks for visitor seating, dark gray color coordinates with dark wood, metal and neutral office interior palettes
Government and public service waiting areas	Durable easy-clean construction supports 100+ daily user cycles in high-traffic public-facing service halls, non-marking foot pads protect hard tile and terrazzo flooring common in institutional buildings

STANDARD S1

EU EN Standards

European market access and chemical requirements

Office seating stability recommendation	EN 16139:2013 Furniture - Strength, durability and safety - Requirements for non-domestic seating, applicable for structural load and stability testing of all seating units
Tempered glass furniture recommendation	EN 12150:2015 Glass in building - Thermally toughened soda lime silicate safety glass, applicable for coffee table glass safety verification
Upholstery abrasion recommendation	EN 14465:2004 Textiles - Upholstery fabrics - Specification, applicable for abrasion and colorfastness testing of faux leather upholstery
Office seating strength recommendation	EN 16139:2013 Furniture - Strength, durability and safety - Requirements for non-domestic seating, applicable for structural load, fatigue and stability testing of all seating units
Upholstery performance recommendation	EN 14465:2004 Textiles - Upholstery fabrics - Specification, applicable for abrasion resistance, colorfastness and tear strength testing of faux leather upholstery
Furniture surface fire safety recommendation	EN 1021:2014 Furniture - Assessment of the ignitability of upholstered furniture - Part 1: Ignition source smouldering cigarette, applicable for high-traffic public reception area use

STANDARD S2

North America ANSI/BIFMA Standards

US and Canada office-furniture standards

No standards data is available for this market.

STANDARD S3

China GB Standards

Standards applicable to China-market projects

Upholstered furniture safety recommendation	GB/T 3324 General technical requirements for wooden furniture, applicable for structural stability verification of seating units
Tempered glass safety recommendation	GB 15763.2 Safety glazing materials in building - Part 2: Tempered glass, applicable for verification of coffee table glass impact resistance
Formaldehyde emission recommendation	GB 18584 Indoor decorating and refurbishing materials - Limit of formaldehyde emission from wood-based furniture and finishing materials, applicable for any composite internal components
Metal furniture coating recommendation	GB/T 3323 Metal furniture general technical requirements, applicable for verification of chrome plating adhesion and corrosion resistance on steel frames
Upholstered furniture stability recommendation	GB/T 3324 General technical requirements for wooden furniture, applicable for structural stability and load verification of seating units

Standard Tender Description

This product must meet the following technical requirements:
1. Upholstered furniture safety recommendation: GB/T 3324 General technical requirements for wooden furniture, applicable for structural stability verification of seating units;
2. Tempered glass safety recommendation: GB 15763.2 Safety glazing materials in building - Part 2: Tempered glass, applicable for verification of coffee table glass impact resistance;
3. Formaldehyde emission recommendation: GB 18584 Indoor decorating and refurbishing materials - Limit of formaldehyde emission from wood-based furniture and finishing materials, applicable for any composite internal components;
4. Metal furniture coating recommendation: GB/T 3323 Metal furniture general technical requirements, applicable for verification of chrome plating adhesion and corrosion resistance on steel frames;
5. Upholstered furniture stability recommendation: GB/T 3324 General technical requirements for wooden furniture, applicable for structural stability and load verification of seating units;
Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.

GENERATED EXPORTS

Ready-to-use export tools

Export data is generated from the current published product record.

Technical Report PDF

Directly download an English report in metric or imperial units.

PDF · OF-RCP-SET-4PC-001

Complete Parameter Workbook

Download all product information and parameter modules in English.

XLSX · OF-RCP-SET-4PC-001

International Listing Template

English title, specifications, materials, standards and purchasing fields.

XLSX · LISTING

Customs Declaration Data

Prepare customs description, material, usage, dimensions and declaration elements.

CUSTOMS · OF-RCP-SET-4PC-001Open Export Tool

Quick Actions

Post Inquiry

FurnDim

OF-RCP-SET-4PC-001

4-Piece Gray Faux Leather Office Reception Seating Set with Glass Coffee Table Key Specifications 2026-08-02 00:06

OF-RCP-SET-4PC-001

Physical Dimensions

Weight, Load & Performance

Materials & Structure

Functions & Adjustment

Packaging & Logistics

Applications & Usage

EU EN Standards

North America ANSI/BIFMA Standards

China GB Standards

Ready-to-use export tools

Technical Report PDF

Complete Parameter Workbook

International Listing Template

Customs Declaration Data

Quick Actions

Product Overview & Construction Details

About FurnDim

About Us

Purchasing Guide

Merchant Services

Help Center

FurnDim

OF-RCP-SET-4PC-001

4-Piece Gray Faux Leather Office Reception Seating Set with Glass Coffee Table Key Specifications 2026-08-02 00:06

OF-RCP-SET-4PC-001

Physical Dimensions

Weight, Load & Performance

Materials & Structure

Functions & Adjustment

Packaging & Logistics

Applications & Usage

EU EN Standards

North America ANSI/BIFMA Standards

China GB Standards

Ready-to-use export tools

Technical Report PDF

Complete Parameter Workbook

International Listing Template

Customs Declaration Data

Quick Actions

Product Overview & Construction Details

Parameter Correction - OF-RCP-SET-4PC-001 · CYFFNB

Edit incorrect parameters

Upload evidence (optional)

Error description (required)

Contact (optional)

About FurnDim

About Us

Purchasing Guide

Merchant Services

Help Center