| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
| single_seat_overall_dimensions | 920 x 780 x 770 mm | |
|---|---|---|
| double_seat_overall_dimensions | 1400 x 780 x 770 mm | |
| triple_seat_overall_dimensions | 1920 x 780 x 770 mm | |
| seat_height_from_floor | 420 mm | |
| seat_depth | 550 mm | |
| backrest_height_above_seat | 350 mm | |
| armrest_height_above_seat | 180 mm | |
| coffee_table_overall_dimensions | 1200 x 600 x 450 mm | |
| side_end_table_overall_dimensions | 600 x 600 x 550 mm | |
| coffee_table_lower_shelf_clearance | 200 mm | |
| metal_leg_diameter | 20 mm | |
| tempered_glass_tabletop_thickness | 10 mm | |
| Seat Cushion Thickness | 180 mm | |
| Back Cushion Thickness | 160 mm | |
| Leg Height / Floor Clearance | 160 mm |
Net weight / load capacity / users / durability
| per_seat_static_load_capacity | 150 kg | |
|---|---|---|
| overall_set_seating_capacity | 5 people | |
| coffee_table_top_static_load | 100 kg | |
| side_table_static_load | 50 kg | |
| foam_density_cushion | 45 kg/m³ | |
| foam_resilience_rate | 45% | |
| upholstery_abrasion_resistance | 50000 cycles | |
| set_total_net_weight | 185 kg | |
| Seat Foam Density / Rebound | 40 kg/m³ / 60% | |
| Upholstery Abrasion Reference | Fabric 60000 cycles; leather-class cover 1.4 mm |
Core acceptance fields · Panels / hardware / frame / upholstery
| seating_upholstery | 0.8mm thick grey PU faux leather, stain-resistant wipe-clean surface | |
|---|---|---|
| accent_cushions | Orange PU faux leather covers with polyester fiber fill | |
| seat_cushion_filling | 45kg/m³ high-density polyurethane foam, wrapped in 20g non-woven fabric | |
| backrest_filling | 35kg/m³ high-resilience foam with 10mm PP cotton top layer | |
| internal_seating_frame | 18mm thick plywood frame reinforced with 20mm square steel tube | |
| sofa_support_legs | 20mm diameter powder-coated black tapered metal legs, with felt floor protection pads | |
| table_top_surfaces | 10mm thick black tempered glass, polished rounded edges | |
| table_support_frames | 30x20mm rectangular powder-coated black steel Z-shaped frames, welded joints | |
| table_lower_shelves | 8mm thick black tempered glass, fixed to frame with rubber gaskets | |
| upholstery_stitching | Bonded polyester thread, 8 stitches per 30mm seam pitch | |
| Timber Frame Section / Moisture | Primary section ≥30 × 50 mm; recommended moisture 12% | |
| Spring / Webbing Specification | Sinuous spring wire 4 mm; elastic webbing 70 mm wide |
Adjustment / rotation / tilt / mobility / storage features
| seating_configuration | Fixed non-reclining lounge design, no tilt or recline mechanisms | |
|---|---|---|
| table_layout | Double-tier open shelf design for both coffee and side tables | |
| floor_protection | All metal legs fitted with anti-scratch felt pads | |
| upholstery_maintenance | Wipe-clean PU leather surface, resistant to common coffee and water stains | |
| set_arrangement | Modular U-shape conversational layout, units can be rearranged as needed | |
| table_weight_balance | Z-frame design provides even weight distribution without cross-brace leg obstruction | |
| cushion_placement | Removable orange accent cushions, can be repositioned for lumbar support | |
| assembly_requirement | Knock-down construction, legs attach to pre-installed frame mounting plates | |
| Cushion Service Configuration | Recommended 2removable/replaceable cushion methods |
Verified carton / gross weight / assembly / loading data
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Module Carton Dimensions | 2200× 1050× 850 mm | |
| Reference Packaging Volume | 1.8 m³/item | |
| Reference Packaged Gross Weight | 110 kg/item |
Recommended spaces / users / usage modes
| office_reception_areas | Suitable for company front reception and visitor waiting zones | |
|---|---|---|
| small_meeting_lounges | Appropriate for informal discussion and casual meeting spaces | |
| executive_office_waiting_zones | Fits outside executive offices for visitor waiting use | |
| hotel_business_lounges | Applicable for hotel business center and guest lounge areas | |
| co_working_space_common_areas | Suitable for co-working space break and waiting zones | |
| recommended_layout | Place set on low-pile commercial rug with central coffee table and side lamp |
EU Market Access Requirements* EN Standards
| office_seating_strength | EN 16139:2013 | |
|---|---|---|
| furniture_surface_flammability | EN 1021:2014 | |
| glass_safety_furniture | EN 12150:2015 |
US and Canada office-furniture standards
| lounge_seating_durability | ANSI/BIFMA X2021 | |
|---|---|---|
| occasional_tables_performance | ANSI/BIFMA X2021 |
Standards applicable to China-market projects
| upholstery_furniture_safety | GB/T 3324 | |
|---|---|---|
| furniture_mechanical_performance | GB/T 10357.1 | |
| upholstery_material_formaldehyde | GB 18584 | |
| tempered_glass_safety | GB 15763.2 |
This product must meet the following technical requirements: 1. upholstery_furniture_safety: GB/T 3324; 2. furniture_mechanical_performance: GB/T 10357.1; 3. upholstery_material_formaldehyde: GB 18584; 4. tempered_glass_safety: GB 15763.2; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
