| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
| Overall dimensions | 1300 x 700 x 380 mm | |
|---|---|---|
| Tabletop thickness | 50 mm | |
| Side panel wall thickness | 30 mm | |
| Open recessed cavity dimensions | 1220 x 620 x 280 mm | |
| Floor to cavity bottom clearance | 50 mm | |
| Top overhang around base | 10 mm | |
| Corner radius | 2 mm | |
| Open cavity front opening height | 280 mm | |
| Floor contact base footprint | 1240 x 640 mm | |
| Finished Top Thickness | 45 mm | |
| Effective Knee Clearance | 680 mm high and 900 mm wide per main seat | |
| Leg / Support Section | 80 mm main section with 2 mm metal wall | |
| Cable Opening Size | 80 mm diameter; cable tray depth 120 mm |
Net weight / load capacity / users / durability
| Net weight range | 48 kg | |
|---|---|---|
| Tabletop distributed static load capacity | 50 kg | |
| Recommended user capacity | Suitable for 5seating positions | |
| Surface heat resistance (short term) | 80°C | |
| Surface abrasion resistance reference | 2000 cycles | |
| Floor load distribution | Evenly distributed across full base perimeter | |
| Stability tilt resistance | Withstands 15° lateral tilt without tipping when loaded to rated 50kg distributed capacity | |
| Top Static Load Reference | 150 kg uniformly distributed | |
| Drawer Slide Load / Life | 45 kg/pair; 50000 cycles | |
| Hinge Opening Life | Acceptance target 80000 cycles | |
| Top Abrasion Reference | Acceptance target ≥4,000 abrasion cycles or finish-system test | |
| Recommended Procurement Warranty | Structure 5 years; hardware 3 years; finish 2 years |
Core acceptance fields · Panels / hardware / frame / upholstery
| Tabletop substrate | 18mm MDF core | |
|---|---|---|
| Side/base panel substrate | 15mm MDF or particleboard | |
| Exterior finish | Matte polyurethane lacquer, light taupe/grey color | |
| Interior cavity finish | Matching matte taupe lacquer | |
| Bottom edge floor contact | 4mm thick non-slip EVA glide pads | |
| Panel joint construction | Mitered corner joints with adhesive and dowel reinforcement | |
| Coating thickness | 0.2 mm per coat, 3-coat application | |
| Edge treatment | Squared polished lacquered edges, no separate edge banding | |
| Cavity interior shelf base | 12mm MDF panel fixed to side panels 50mm above floor level | |
| Primary Panel Thickness | 25 mm; load-bearing top may use 40 mm composite build-up | |
| Edge Band Thickness | 2 mm | |
| Metal Frame Wall Thickness | 2 mm cold-rolled steel | |
| Primary Connector Specification | Reference M6-M8 with at least 2 fixing points per main support | |
| Reference Finish / Color Count | Recommended 6top finishes and 3frame colors |
Adjustment / rotation / tilt / mobility / storage features
| Storage configuration | Fixed open front recessed cavity, no drawers, doors, or adjustable shelves | |
|---|---|---|
| Mobility | Static non-caster design, requires lifting for repositioning | |
| Surface use case | Flat level top for placing beverages, books, decorative objects, and small table lamps | |
| Assembly requirement | Knock-down or fully assembled delivery option | |
| Adjustable features | No height adjustment, extension, or tilt mechanisms | |
| Cable management | No integrated cable ports or routing | |
| Floor protection function | EVA glide pads raise base 1mm above floor surface to prevent scuffing on hardwood, tile, and low-pile carpet floors, no sharp exposed substrate edges at floor contact points | |
| Cable Management Capacity | Reference capacity 10power/data cables; tray load 10 kg | |
| Reference Reassembly Count | Main joints should support 5controlled assembly cycles |
Verified carton / gross weight / assembly / loading data
| Carton count | 1 unit per carton | |
|---|---|---|
| Carton dimensions | 1400 x 800 x 480 mm | |
| Gross weight per carton | 56 kg | |
| CBM per unit | 0.54 CBM | |
| Assembly time for flat-pack variant | 20 minutes for 1 person with included hardware | |
| Loading quantity (40ft HQ container) | 120 units | |
| Reference Package Count | 1 set / 2 cartons | |
| Reference Assembly Time | 40 minutes per set | |
| Reference Package Dimensions | 2100× 1100× 300 mm | |
| Reference Packaged Gross Weight | 90 kg/set in 2 cartons |
Recommended spaces / users / usage modes
| Residential living room use | Positioned centered in front of 3-seat sofas or sofa+armchair seating clusters, at ergonomic height for reaching items while seated | |
|---|---|---|
| Luxury minimalist/modern Italian style interiors | Matches matte taupe finish, clean block form, and no decorative hardware for high-end residential or show home settings | |
| Lounge and reception waiting areas | Suitable for low-traffic corporate reception or executive lounge spaces paired with upholstered leather seating | |
| Recommended pairings | Pairs with low-profile leather or fabric upholstery sofas with 45 cm seat height, maintaining 25 mm ergonomic height difference between seat and tabletop | |
| Surface use restrictions | Not suitable for cutting, hot cookware directly placed on surface, or heavy loads over 50kg | |
| Corporate executive lounge reception areas | Suitable for low-traffic executive lounge or VIP reception spaces paired with upholstered leather seating, rated for light commercial use with 50kg load capacity | |
| Open storage use cases | Recessed cavity suitable for storing coffee table books, throw blankets, remote controls, or small decorative baskets, with full front access for easy retrieval |
EU Market Access Requirements* EN Standards
| EN 15372:2016 Furniture - Strength, durability and safety - Requirements for non-domestic tables | Applicable if specified for contract/hospitality use, covering static load and stability requirements | |
|---|---|---|
| EN 12521:2015 Furniture - Strength, durability and safety - Requirements for domestic tables | Applies to residential use stability and structural performance for coffee tables |
Standards applicable to China-market projects
| GB/T 3324-2017 General technical requirements for wooden furniture | Applies to dimensional tolerance, surface coating quality, and structural strength requirements for wooden residential coffee tables | |
|---|---|---|
| GB 18584-2001 Indoor decorating and refurbishing materials - Limit of harmful substances of wood based furniture | Applicable standards and test results require confirmation | |
| GB/T 4893.4-2013 Test of surface coatings of furniture - Part 4: Determination of adhesion | Applicable for verifying lacquer coating adhesion to MDF substrates | |
| GB/T 4893.8-2013 Test of surface coatings of furniture - Part 8: Determination of abrasion resistance | Applicable for measuring surface wear performance of the matte lacquer top |
This product must meet the following technical requirements: 1. GB/T 3324-2017 General technical requirements for wooden furniture: Applies to dimensional tolerance, surface coating quality, and structural strength requirements for wooden residential coffee tables; 2. GB 18584-2001 Indoor decorating and refurbishing materials - Limit of harmful substances of wood based furniture: Applicable standards and test results require confirmation; 3. GB/T 4893.4-2013 Test of surface coatings of furniture - Part 4: Determination of adhesion: Applicable for verifying lacquer coating adhesion to MDF substrates; 4. GB/T 4893.8-2013 Test of surface coatings of furniture - Part 8: Determination of abrasion resistance: Applicable for measuring surface wear performance of the matte lacquer top; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
