| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
| Overall dimensions | 1410 x 1060 x 420 mm | |
|---|---|---|
| Glass top thickness | 12 mm | |
| Pedestal base height | 402 mm | |
| Pedestal base cross section | 150 x 150 mm | |
| Glass edge polish radius | 3 mm | |
| Floor clearance under table | 0 mm | |
| Largest tabletop overhang from left base | 520 mm | |
| Largest tabletop overhang from right base | 480 mm | |
| Glass top corner radius (rounded edges) | 120 mm | |
| Base wall thickness | 3 mm | |
| Finished Top Thickness | 45 mm | |
| Effective Knee Clearance | 680 mm high and 900 mm wide per main seat | |
| Leg / Support Section | 80 mm main section with 2 mm metal wall | |
| Cable Opening Size | 80 mm diameter; cable tray depth 120 mm |
Net weight / load capacity / users / durability
| Distributed static top load capacity | 100 kg | |
|---|---|---|
| Net product weight | 68 kg | |
| Bronze finish abrasion resistance | 500 rub cycles without finish loss | |
| Recommended number of users served | 6 | |
| Floor protection glide load per base | 70 kg | |
| Warranty period | 5 years | |
| Top Static Load Reference | 150 kg uniformly distributed | |
| Drawer Slide Load / Life | 45 kg/pair; 50000 cycles | |
| Hinge Opening Life | Acceptance target 80000 cycles | |
| Top Abrasion Reference | Acceptance target ≥4,000 abrasion cycles or finish-system test |
Core acceptance fields · Panels / hardware / frame / upholstery
| Tabletop | 12mm tempered clear float glass, polished smooth edges | |
|---|---|---|
| Pedestal supports | Brushed bronze finish steel, welded box construction | |
| Glass-to-base connection | 4x M8 stainless steel mounting bolts per base, rubber isolation pads | |
| Base bottom glides | Felt-lined plastic floor protectors, 20mm diameter | |
| Base finish coating | Electroplated brushed bronze PVD coating, 0.02mm thickness | |
| Glass surface treatment | Smooth stain-resistant polished surface | |
| Internal base support | Welded internal steel cross bracing | |
| Primary Panel Thickness | 25 mm; load-bearing top may use 40 mm composite build-up | |
| Edge Band Thickness | 2 mm | |
| Metal Frame Wall Thickness | 2 mm cold-rolled steel | |
| Primary Connector Specification | Reference M6-M8 with at least 2 fixing points per main support | |
| Reference Finish / Color Count | Recommended 6top finishes and 3frame colors |
Adjustment / rotation / tilt / mobility / storage features
| Central lounge surface function | Flat stable surface for serving drinks, displaying decor, holding reading materials | |
|---|---|---|
| Assembly requirement | Knock-down assembly: attach glass top to pre-finished pedestal bases with included hardware | |
| Floor protection function | Felt glides on base bottoms prevent scratching hard flooring and rug snags | |
| Surface safety function | Tempered glass construction shatters into granular fragments if broken | |
| Leveling adjustment | 4mm height adjustable glides per pedestal for uneven floor compensation | |
| Placement suitability | Freestanding placement with 360-degree access, no wall mounting required | |
| Cable Management Capacity | Reference capacity 10power/data cables; tray load 10 kg | |
| Reference Reassembly Count | Main joints should support 5controlled assembly cycles |
Verified carton / gross weight / assembly / loading data
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Package Dimensions | 2100× 1100× 300 mm | |
| Reference Packaged Gross Weight | 90 kg/set in 2 cartons | |
| Reference Packaging Volume | 0.55 m³/set |
Recommended spaces / users / usage modes
| Residential living room | Centrally placed between facing sectional sofas for conversation area use | |
|---|---|---|
| Luxury hotel lounge | Used in VIP reception or guest lounge areas for guest beverage and display use | |
| High-end office reception | Placed in executive reception areas to hold reading materials and guest refreshments | |
| Showroom display | Featured in modern furniture showrooms as a statement design piece for living room sets | |
| Condominium lounge common area | Deployed in multi-unit residential common rooms for resident seating groups | |
| Recommended pairing | Matched with low-profile armless lounge sofas of 420mm seat height for ergonomic access |
EU Market Access Requirements* EN Standards
| Tempered glass safety standard | EN 12150 | |
|---|---|---|
| Furniture surface durability standard | EN 15187 | |
| Furniture stability standard | EN 1730 | |
| Tempered glass impact resistance | 227 g steel ball drop from 1200 mm |
Standards applicable to China-market projects
| Tempered glass safety standard | GB 15763.2 | |
|---|---|---|
| Furniture metal coating standard | GB/T 3324 |
This product must meet the following technical requirements: 1. Tempered glass safety standard: GB 15763.2; 2. Furniture metal coating standard: GB/T 3324; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
