| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
| Overall sectional dimensions (main L-unit) | 5200 x 3200 x 750 mm | |
|---|---|---|
| Single straight sofa seat module width | 1000 mm | |
| Seat depth per position | 680 mm | |
| Seat height from floor | 420 mm | |
| Backrest height above seat surface | 330 mm | |
| Armrest width (per side) | 120 mm | |
| Single armchair dimensions | 1100 x 950 x 750 mm | |
| Corner module cut angle | 135 degrees | |
| Sofa base clearance from floor | 20 mm | |
| Included matching ottoman dimensions | 600 x 600 x 400 mm | |
| Overall main L-shaped sectional dimensions | 5200 x 3200 x 750 mm | |
| Seat Cushion Thickness | 180 mm | |
| Back Cushion Thickness | 160 mm | |
| Leg Height / Floor Clearance | 160 mm |
Net weight / load capacity / users / durability
| Total set weight (full L-unit + 2 armchairs + 1 ottoman) | 640 kg | |
|---|---|---|
| Seat static load capacity per position | 150 kg | |
| Total recommended user capacity for main sectional | 10 people | |
| Seat foam density | 45 kg/m³ | |
| Backrest foam density | 30 kg/m³ | |
| Leather upholstery abrasion resistance | 50000 cycles | |
| Seat foam compression recovery rate | 95% | |
| Frame joint static load rating | 300 kg per linear meter | |
| Main sectional recommended occupant count | 8 people | |
| Upholstery leather abrasion resistance | 50000 cycles |
Core acceptance fields · Panels / hardware / frame / upholstery
| Upholstery material | 1.4mm thick top-grain black full-aniline leather | |
|---|---|---|
| Internal frame construction | 40mm thick kiln-dried solid hardwood frame with mortise and tenon joinery | |
| Seat core padding | 120mm thick high-density polyurethane foam wrapped with 20mm down blend topper | |
| Backrest padding | 80mm thick medium-density polyurethane foam with fiber wrap | |
| Seam construction | Reinforced polyester stitching with 8 stitches per inch | |
| Base support structure | Matte black powder-coated 2mm thick steel cross-bracing under each module | |
| Included throw pillow fill | 100% polyester fiber fill | |
| Module connection hardware | Heavy-duty zinc-plated steel connector clips between adjacent modules | |
| Seating surface upholstery | 1.4mm thick top-grain black full-aniline leather, panel-stitched with matched grain direction across all modules | |
| Internal load-bearing frame | 40mm thick kiln-dried solid hardwood frame with mortise and tenon joinery, reinforced with corner glue blocks | |
| Accent throw pillow fill | 100% hollow conjugated polyester fiber fill, in matching black and off-white linen-blend covers | |
| Inter-module connection hardware | Heavy-duty zinc-plated steel spring-loaded connector clips installed on adjacent module mating edges |
Adjustment / rotation / tilt / mobility / storage features
| Modular configuration capability | Reconfigurable via interlocking metal clips, supports straight, L-shape or open U-shape layouts by rearranging standard seat modules | |
|---|---|---|
| Corner module angled seating | 135-degree angled corner seat provides 2 additional seating positions without sharp 90-degree obstruction | |
| Fixed non-reclining seat design | All seat and back positions are fixed at pre-set ergonomic angles with no recline or adjustable mechanisms, for clean low-profile aesthetic | |
| Module alignment locking | Spring-loaded steel clips lock adjacent modules together during installation to prevent separation during regular use | |
| Armchair standalone placement | Two matching single armchairs can be positioned freely around the room independently of the main sectional | |
| Ottoman multi-use function | Matching upholstered ottoman supports use as footrest, extra casual seating, or small side table when topped with a tray | |
| Floor protection design | Felt glides installed under base frame prevent scratches to hard wood or tile flooring, no metal to floor direct contact | |
| Modular layout reconfiguration | Interlocking steel clips allow rearrangement of seat modules to form straight, L-shape, U-shape or open lounge layouts without permanent modification to components | |
| Angled corner seating position | 135-degree internal angle corner module provides 2 integrated seating positions without restricted leg room from sharp 90-degree corners | |
| Fixed stationary seating design | All seat and backrest positions are fixed at 105-degree seated back angle with no recline, swivel or rock mechanisms for a clean unbroken low-profile block aesthetic | |
| Inter-module anti-separation locking | Spring-loaded steel clips engage automatically when modules are pushed together during installation, requiring 15kg of lateral pull force to disconnect | |
| Standalone seating flexibility | Two matching single armchairs and one separate chaise module can be positioned independently around the room to support flexible conversation layouts |
Verified carton / gross weight / assembly / loading data
| Total number of shipping cartons | 8 cartons | |
|---|---|---|
| Largest carton dimensions (single seat module) | 1050 x 900 x 650 mm | |
| Total gross shipping weight | 720 kg | |
| Total shipping volume (CBM) | 5.1 CBM | |
| On-site assembly time (2 installers) | 120 minutes | |
| 20ft GP container loading quantity | 6 sets | |
| 40ft HQ container loading quantity | 15 sets | |
| Packaging material specification | 5-layer corrugated carton with EPE foam wrap and corner protectors for all leather surfaces | |
| Reference Package Count | 1 set / 2 cartons | |
| Reference Assembly Time | 40 minutes per set |
Recommended spaces / users / usage modes
| Large open-plan modern villa living rooms | Suited for 60sqm open living areas, the large L-shaped layout creates a central conversation zone for family gatherings and guest entertainment | |
|---|---|---|
| High-end residential reception areas | Matching armchairs and ottoman support flexible guest seating for luxury penthouse or upscale apartment reception spaces | |
| Contemporary style lounge spaces in boutique offices | Low-profile minimalist black leather finish fits modern executive lounge or creative office waiting areas without excessive ornamentation | |
| Open concept home theater casual seating | Deep seat dimensions support relaxed, long-duration seating for movie viewing adjacent to media wall installations | |
| Recommended pairing items | Works with low-profile stone coffee tables, textured neutral area rugs and minimalist wood wall storage units to complete a contemporary luxury interior scheme | |
| Large open-plan modern residential living rooms | Suited for 60sqm open living areas, the angled L layout creates a defined central conversation zone for family gatherings and guest entertainment | |
| High-end penthouse and luxury apartment reception areas | Matching armchairs, chaise and ottoman support flexible multi-directional guest seating for upscale residential reception spaces | |
| Boutique office executive lounge spaces | Low-profile minimalist black leather finish fits modern executive lounge or creative office waiting areas without ornate decorative details |
EU Market Access Requirements* EN Standards
| EN 12520:2015 | Applicable European standard for domestic furniture seating strength, durability and stability requirements for residential sofa products | |
|---|---|---|
| EN 1021-1:2014 | Applicable European standard for upholstered furniture ignitability resistance to smouldering cigarette, a baseline fire safety requirement for residential seating |
Standards applicable to China-market projects
| GB 18584-2001 | Applicable Chinese national standard for limit of harmful substances in wooden furniture, covering formaldehyde and heavy metal emission limits for internal frame materials | |
|---|---|---|
| GB/T 16799-2008 | Applicable Chinese national standard for furniture leather, covering tensile strength, color fastness and abrasion requirements for upholstery leather |
This product must meet the following technical requirements: 1. GB 18584-2001: Applicable Chinese national standard for limit of harmful substances in wooden furniture, covering formaldehyde and heavy metal emission limits for internal frame materials; 2. GB/T 16799-2008: Applicable Chinese national standard for furniture leather, covering tensile strength, color fastness and abrasion requirements for upholstery leather; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
