| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
| Set overall dimensions (3-seat sofa as largest unit) | 2000 x 850 x 880 mm | |
|---|---|---|
| 3-seat sofa seat width | 1700 mm | |
| 3-seat sofa seat depth | 580 mm | |
| 3-seat sofa seat height from floor | 420 mm | |
| Single armchair overall dimensions | 900 x 820 x 880 mm | |
| Single armchair seat width | 600 mm | |
| Armrest height from floor | 620 mm | |
| Backrest total height | 460 mm | |
| Matching coffee table overall dimensions | 1200 x 700 x 450 mm | |
| Coffee table lower shelf height from floor | 120 mm | |
| Wooden leg diameter | 50 mm | |
| Seat cushion thickness | 120 mm | |
| Back Cushion Thickness | 160 mm | |
| Leg Height / Floor Clearance | 160 mm |
Net weight / load capacity / users / durability
| 3-seat sofa net weight | 75 kg | |
|---|---|---|
| 3-seat sofa total static load capacity | 450 kg | |
| Seat foam density | 45 kg/m³ | |
| Foam rebound rate | 45% | |
| Recommended total occupant capacity per set | 5 people | |
| Upholstery abrasion resistance (Martindale) | 50000 cycles | |
| Wood frame static load durability | 100000 cycle test | |
| Seat foam rebound rate | 45% | |
| Total set occupant capacity | 5 people | |
| Upholstery Martindale abrasion resistance | 50000 cycles |
Core acceptance fields · Panels / hardware / frame / upholstery
| Outer upholstery | Dark brown polyurethane faux leather | |
|---|---|---|
| Internal support frame | Solid hardwood frame with reinforced corner blocking | |
| Seat cushion padding | High-density polyurethane foam wrapped with soft dacron layer | |
| Backrest padding | Medium-density polyurethane foam with vertical channel tufting on lumbar section | |
| Legs and arm trim | Stained solid beech wood with matte walnut-tone finish | |
| Armrest padding | 100mm thick foam padding wrapped in matching faux leather | |
| Coffee table structural supports | Polished 304 stainless steel square column legs | |
| Coffee table shelves | 10mm thick tempered safety glass, black tinted finish | |
| Seam stitching | Bonded nylon thread with 8mm stitch pitch | |
| Frame connector hardware | Zinc-plated steel corner brackets and bolts | |
| Seat/back/arm outer upholstery | Dark brown 0.8mm thick polyurethane faux leather | |
| Legs and exposed arm trim | Stained solid beech wood with matte walnut-tone finish |
Adjustment / rotation / tilt / mobility / storage features
| Seating configuration | Fixed 1+1+3 arrangement, designed for face-to-face visitor reception | |
|---|---|---|
| Lumbar support | Integrated vertical channel-tufted lower backrest provides passive lumbar support for upright seated posture | |
| Armrest support | Padded full-length armrests on all seating units support forearm weight during casual meetings | |
| Coffee table storage | Double-tier glass shelves provide upper surface for refreshments and lower shelf for reading materials or storage | |
| Floor protection | Small non-marking plastic glides fitted to the base of all wood legs to prevent hard floor scratching | |
| Assembly structure | Knockdown construction: legs attach to pre-assembled upholstered seat/back units with included hardware, no special tools required | |
| Seating orientation | Fixed position seating, no recline, swivel or tilt mechanism for stable formal reception use | |
| Upholstery maintenance | Smooth non-porous faux leather surface allows wipe-clean maintenance for high-traffic office areas | |
| Seating arrangement | Fixed 1+1+3 face-to-face configuration for formal visitor reception | |
| Arm support | Full-length padded armrests on all seating units support 5kg forearm load during casual meetings | |
| Assembly design | Knockdown construction: legs attach to pre-assembled upholstered seat/back units with included hex key hardware | |
| Seat movement | Fixed position seating with no recline, swivel or tilt mechanism for stable formal reception use |
Verified carton / gross weight / assembly / loading data
| Total packaging pieces per full set | 5 cartons | |
|---|---|---|
| 3-seat sofa carton dimensions | 2050 x 900 x 650 mm | |
| Single armchair carton dimensions | 950 x 870 x 650 mm | |
| Coffee table carton dimensions | 1250 x 750 x 150 mm | |
| Total gross weight per full set | 160 kg | |
| Total CBM per full set | 2.8 cbm | |
| on-site assembly time | 50 minutes | |
| 20ft GP container loading quantity | 18 sets | |
| 40ft HQ container loading quantity | 45 sets | |
| Reference Package Count | 1 set / 2 cartons |
Recommended spaces / users / usage modes
| Corporate reception areas | Suitable for office lobby and visitor waiting areas, providing formal comfortable seating for 5 guests facing a central refreshment table | |
|---|---|---|
| Executive meeting spaces | Appropriate for small informal executive meeting rooms or manager office guest seating, with durable easy-clean upholstery for daily commercial use | |
| Public service waiting rooms | Suitable for bank, government or service center waiting zones, with high-wear upholstery rated for continuous high-traffic use | |
| Shared lounge spaces | Applicable for office staff break rooms and collaborative lounge zones, with supportive padding for short to medium duration seating | |
| Recommended complementary configuration | Pairs with the included double-tier glass coffee table; optional matching side tables available to complete the reception layout | |
| Floor type compatibility | Suitable for use on tile, polished concrete, vinyl and low-pile carpet floors, with non-marking glides to prevent floor damage | |
| Corporate reception lobbies | Suitable for office main entrance visitor waiting areas, providing formal durable seating for 5 guests with central table for refreshments and materials | |
| Executive office guest areas | Appropriate for placement in manager or executive offices, supporting casual 3-person meetings with easy-clean upholstery for daily use |
EU Market Access Requirements* EN Standards
| EN 1335-2:2018 | Office furniture safety requirements for seating, applicable for structural strength and stability acceptance | |
|---|---|---|
| EN 1022:2018 | Domestic and contract furniture seating stability test standard, recommended for product stability verification | |
| EN 12520:2015 | Furniture strength, durability and safety requirements for residential and contract seating | |
| EN 12150-1:2015 | Thermally toughened soda lime silicate safety glass standard, applicable to coffee table glass components |
US and Canada office-furniture standards
| North America procurement and testing reference | ANSI/BIFMA X5.4 Public and Lounge Seating |
|---|
Standards applicable to China-market projects
| GB/T 3324-2017 | General technical requirements for wooden furniture, applicable to the wood frame and structural components of the sofa set | |
|---|---|---|
| GB 20400-2006 | Limit of harmful substances in leather and fur, applicable for acceptance testing of faux leather upholstery VOC and heavy metal content | |
| GB/T 19001-2016 | Quality management system requirement, recommended for supplier production capability verification | |
| GB 15763.2-2005 | Safety standards for tempered glass, applicable to the glass shelves of the matching coffee table | |
| GB/T 16799-2008 | Polyurethane synthetic leather for furniture, applicable to upholstery material performance acceptance |
This product must meet the following technical requirements: 1. GB/T 3324-2017: General technical requirements for wooden furniture, applicable to the wood frame and structural components of the sofa set; 2. GB 20400-2006: Limit of harmful substances in leather and fur, applicable for acceptance testing of faux leather upholstery VOC and heavy metal content; 3. GB/T 19001-2016: Quality management system requirement, recommended for supplier production capability verification; 4. GB 15763.2-2005: Safety standards for tempered glass, applicable to the glass shelves of the matching coffee table; 5. GB/T 16799-2008: Polyurethane synthetic leather for furniture, applicable to upholstery material performance acceptance; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
