| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
| 3-seater sofa overall dimensions | 1800 x 750 x 720 mm | |
|---|---|---|
| Single armchair overall dimensions | 820 x 720 x 720 mm | |
| Coffee table overall dimensions | 1200 x 600 x 450 mm | |
| Seat height from floor | 420 mm | |
| Seat depth for all seating units | 680 mm | |
| Armrest height from floor | 620 mm | |
| Backrest height above seat | 300 mm | |
| Lower coffee table shelf clearance | 150 mm | |
| Sofa/armchair leg height | 120 mm | |
| Coffee table glass top thickness | 12 mm | |
| Upholstered arm width | 120 mm | |
| Lower coffee table storage shelf internal depth | 480 mm | |
| Finished Seat Cushion Thickness | 90 mm | |
| Backrest Padding Thickness | 70 mm | |
| Lumbar Support Zone Height | 240 mm | |
| Clear Width Between Armrests | 540 mm |
Net weight / load capacity / users / durability
| 3-seater sofa net weight | 58 kg | |
|---|---|---|
| Per-seat static load capacity | 150 kg | |
| Fabric abrasion resistance (Martindale) | 30000 cycles | |
| Seat foam density | 35 kg/m³ | |
| Recommended seating capacity for full set | 5 people | |
| Seat Foam Density / Rebound Reference | 45 kg/m³ / 65% | |
| Back Foam Density Reference | 38 kg/m³ | |
| Upholstery Thickness / Abrasion Reference | 1.4 mm / 50000 cycles | |
| Five-star Base Static Load Reference | Acceptance target ≥120 kg; chair reference load 150 kg | |
| Caster Rolling Durability Reference | Acceptance target 30000 cycles |
Core acceptance fields · Panels / hardware / frame / upholstery
| Seating upholstery fabric | Matte blue polyester woven fabric | |
|---|---|---|
| Seat cushion core | High-density polyurethane foam | |
| Back cushion core | Medium-density polyurethane foam | |
| Seating internal frame | Kiln-dried solid hardwood with plywood reinforcement | |
| Seating support legs | Brushed 201 stainless steel cylindrical legs | |
| Coffee table top surface | 12mm clear tempered glass | |
| Coffee table frame and legs | Brushed 201 stainless steel tubular frame | |
| Coffee table lower shelf | Smoked dark tempered glass | |
| Upholstery stitching | Matching blue polyester thread with 8mm stitch pitch | |
| Floor protection glides | Injected nylon non-marking glides | |
| Seating support system | 40mm wide elastic webbing, 50mm spacing under seat cushions | |
| Seat Internal Support Board Thickness | 14 mm bent plywood or equivalent support board |
Adjustment / rotation / tilt / mobility / storage features
| Fixed-position reception seating | All sofa and armchair units are fully assembled with no recline, swivel or adjustment mechanisms, designed for static guest seating in public reception areas | |
|---|---|---|
| Two-tier coffee table storage | Upper glass tabletop provides a flat surface for drinkware, documents and decor, while lower smoked glass shelf provides open accessible storage for magazines, catalogs and reading materials | |
| X-brace table structural support | Stainless steel X-shaped cross brace connects upper and lower table shelves to eliminate frame wobble and distribute weight evenly across all four support points | |
| Elevated seating clearance | 120mm leg height provides full under-seat clearance for standard vacuum cleaners and cleaning tools, enabling easy routine maintenance in high-traffic office areas | |
| Non-marking floor protection | Nylon glides fitted to the base of all metal legs prevent scratches, scuffs and indentation on hard tile, vinyl and polished concrete office floors | |
| Removable seat cushion design | Seat cushions are fitted with hook-and-loop fasteners to prevent sliding during use, and can be lifted for cleaning or replacement without disassembling the main frame | |
| Modular set layout flexibility | All three seating units and the coffee table are freestanding, allowing reception layout adjustment for different room sizes without permanent floor fixing | |
| Recline Angle / Lock Reference | 125° with 3 suggested lock positions | |
| Tilt Tension User-weight Range | Reference adjustment coverage 120 kg | |
| Height Adjustment Stroke | 100 mm continuous travel | |
| Rotation / Mobility Configuration | 360° swivel with 5-caster multidirectional movement |
Verified carton / gross weight / assembly / loading data
| Number of shipping cartons | 5 ctns | |
|---|---|---|
| Largest shipping carton dimensions | 1850 x 800 x 650 mm | |
| Total shipping gross weight | 140 kg | |
| Total shipping volume | 1.3 CBM | |
| On-site assembly time | 40 minutes | |
| Standard 40HQ container loading quantity | 52 sets | |
| Packaging materials | 5-layer corrugated carton, 20mm EPE foam wrap, corner protectors, poly bags for hardware | |
| Warranty period | 3 years | |
| Available upholstery color options | 6 colors | |
| Reference Package Count | 1 set / 2 cartons |
Recommended spaces / users / usage modes
| Corporate office reception areas | Suitable for entry lobbies and guest waiting zones with its compact footprint and professional clean-lined aesthetic, accommodating up to 5 visitors for short wait times | |
|---|---|---|
| Small meeting and breakout spaces | Appropriate for informal team discussion areas and collaborative breakout zones where low-profile, comfortable seating supports relaxed group conversation | |
| Co-working space common areas | Ideal for shared co-working lounge areas with high foot traffic, as durable fabric and stainless steel framing withstand frequent daily use from rotating users | |
| Healthcare and clinic waiting rooms | Suitable for outpatient clinic waiting areas where easy-clean upholstery and stable fixed seating meet public waiting room durability requirements | |
| Hotel business center guest areas | Fits hotel business center and executive lounge seating layouts, providing a modern polished appearance matching contemporary hospitality interior design | |
| Serviced apartment entry lounges | Appropriate for serviced apartment and short-term rental lobby seating as compact dimensions work well in smaller entry spaces without overcrowding | |
| Recommended Matching Desk Size | 2.4 m executive desk | |
| Reference Daily Use Duration | 8 hours/day; confirm by ergonomic testing |
EU Market Access Requirements* EN Standards
| EN 1022:2018 | Domestic furniture - Seating - determination of stability, applicable for verifying stability of all reception seating units under normal use loads | |
|---|---|---|
| EN 12520:2015 | Furniture - strength, durability and safety - requirements for domestic seating, applicable as a minimum structural strength benchmark for commercial reception seating | |
| EN 13722:2004 | Furniture - tables - test methods for stability, applicable to the two-tier coffee table for stability verification under uneven load | |
| EN 1021-1:2014 | Furniture - assessment of the ignitability of upholstered furniture - Part 1: ignition source smouldering cigarette, recommended fire safety standard for public area seating | |
| EN 12600:2002 | Glass in building - pendulum test - impact test method and classification for flat glass, applicable to tempered glass table and shelf components for impact safety |
US and Canada office-furniture standards
| ANSI/BIFMA X5.4-2020 | Lounge and Public Seating standard, applicable for structural strength, durability and stability testing of reception sofa and armchair units for commercial office use | |
|---|---|---|
| ANSI/BIFMA X5.5-2021 | Desk Products standard, applicable to the reception coffee table for structural load, stability and durability requirements in office environments | |
| ANSI/BIFMA X7.1-2011 | Standard for Formaldehyde and TVOC Emissions of Low-emitting Office Furniture Systems and Seating, recommended for indoor air quality acceptance for commercial office installations |
Standards applicable to China-market projects
| GB/T 3324-2017 | General technical requirements for wooden furniture, applicable to the internal hardwood frame construction of all upholstered seating units for structural stability and safety | |
|---|---|---|
| GB 18584-2001 | Indoor decoration and refurbishing materials - limit of harmful substances in wooden furniture, applicable for formaldehyde emission testing of internal plywood and frame materials | |
| GB/T 19941-2005 | Leather and fur - determination of formaldehyde content, applicable to fabric upholstery for restricted harmful substance testing | |
| GB/T 24821-2009 | Office furniture - tables and desks, applicable to the coffee table for structural stability, edge finishing and safety requirements | |
| GB 17927.1-2011 | Upholstered furniture - assessment of the ignitability of upholstered furniture - Part 1: Ignition source smouldering cigarette, recommended for fire safety acceptance of seating in public office spaces | |
| GB/T 17592-2011 | Textiles - Determination of banned azo colourants, applicable to fabric upholstery for restricted harmful substance testing |
This product must meet the following technical requirements: 1. GB/T 3324-2017: General technical requirements for wooden furniture, applicable to the internal hardwood frame construction of all upholstered seating units for structural stability and safety; 2. GB 18584-2001: Indoor decoration and refurbishing materials - limit of harmful substances in wooden furniture, applicable for formaldehyde emission testing of internal plywood and frame materials; 3. GB/T 19941-2005: Leather and fur - determination of formaldehyde content, applicable to fabric upholstery for restricted harmful substance testing; 4. GB/T 24821-2009: Office furniture - tables and desks, applicable to the coffee table for structural stability, edge finishing and safety requirements; 5. GB 17927.1-2011: Upholstered furniture - assessment of the ignitability of upholstered furniture - Part 1: Ignition source smouldering cigarette, recommended for fire safety acceptance of seating in public office spaces; 6. GB/T 17592-2011: Textiles - Determination of banned azo colourants, applicable to fabric upholstery for restricted harmful substance testing; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
