| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
| 3-seater sofa overall dimensions | 2100 x 850 x 850 mm | |
|---|---|---|
| Single-seater armchair overall dimensions | 950 x 850 x 850 mm | |
| Seat height (sofa and armchairs) | 430 mm | |
| Seat depth (sofa and armchairs) | 580 mm | |
| Backrest height (from seat surface) | 420 mm | |
| Armrest height (from floor) | 620 mm | |
| Center coffee table overall dimensions | 1300 x 750 x 450 mm | |
| Side end table overall dimensions | 650 x 650 x 500 mm | |
| Chrome cantilever base width (single chair) | 900 mm | |
| Glass tabletop thickness | 12 mm | |
| Seat Cushion Thickness | 180 mm | |
| Back Cushion Thickness | 160 mm | |
| Leg Height / Floor Clearance | 160 mm |
Net weight / load capacity / users / durability
| 3-seater sofa net weight | 85 kg | |
|---|---|---|
| Seating static load capacity (per seat) | 150 kg | |
| Total recommended seating capacity | 5 people | |
| Foam density (seat cushions) | 45 kg/m³ | |
| Faux leather abrasion resistance | 50000 rub cycles | |
| Chrome frame corrosion resistance rating | Grade 6 (48 hour salt spray test) | |
| Foam density (back cushions) | 35 kg/m³ | |
| Upholstery seam strength | 80 N | |
| Seat Foam Density / Rebound | 40 kg/m³ / 60% | |
| Upholstery Abrasion Reference | Fabric 60000 cycles; leather-class cover 1.4 mm |
Core acceptance fields · Panels / hardware / frame / upholstery
| Seat and back upholstery | Black smooth faux leather (PU leather) | |
|---|---|---|
| Cushion padding | High-density polyurethane foam | |
| Seating support frame | 1.5mm thick chrome-plated steel cantilever base | |
| Table support structure | Polished chrome-plated square steel tube frame | |
| Table top and lower shelf | Black tempered glass with polished edge | |
| Internal frame (seating) | Solid kiln-dried hardwood frame | |
| Seat support webbing | 50mm wide elastic webbing | |
| Back cushion padding | 35 kg/m³ soft polyurethane foam | |
| Seat support system | 50 mm wide elastic webbing, 80 mm spacing across seat frame | |
| Foot protection pads | 5 mm thick rubber non-slip pads fitted to all cantilever frame ends | |
| Adhesives and frame treatments | Low-VOC water-based adhesive for upholstery bonding, anti-rust primer under chrome plating | |
| Timber Frame Section / Moisture | Primary section ≥30 × 50 mm; recommended moisture 12% |
Adjustment / rotation / tilt / mobility / storage features
| Cantilever base design | Continuous polished chrome steel frame distributes weight evenly, no separate legs required for stable placement on hard flooring | |
|---|---|---|
| Fixed upholstered armrests | Wide padded armrests are integrated with sofa frame, provide stable arm support and prevent lateral wear on upholstery edges | |
| Double-tier coffee table design | Upper clear glass top supports beverage and document placement, lower black glass shelf provides additional storage for magazines or office supplies | |
| Stain-resistant upholstery surface | Smooth faux leather surface can be wiped clean with damp cloth for easy maintenance in high-traffic reception areas | |
| Modular set configuration | 1 three-seater sofa + 2 single armchairs + 1 center coffee table + 1 side end table can be arranged in U-shape as shown, or separated for different meeting area layouts | |
| Non-slip foot pads | Small rubber pads at ends of cantilever bases protect flooring from scratches and prevent sliding on smooth hard floors | |
| Fixed upholstered backrests | Structured upright backrest angle of 105 degrees from seat surface provides lumbar support for 30+ minute seated meetings without adjustment | |
| Cushion Service Configuration | Recommended 2 removable/replaceable cushion methods |
Verified carton / gross weight / assembly / loading data
| Total packaged carton count | 6 cartons | |
|---|---|---|
| Largest carton dimensions (3-seater sofa) | 2150 x 900 x 650 mm | |
| Total set gross weight | 210 kg | |
| Total packaged volume (CBM) | 2.3 cbm | |
| On-site assembly time | 60 minutes | |
| 20ft GP container loading capacity | 32 sets | |
| 40ft HQ container loading capacity | 78 sets | |
| Reference Package Count | 1 set / 2 cartons | |
| Reference Assembly Time | 40 minutes per set | |
| Reference Module Carton Dimensions | 2200× 1050× 850 mm |
Recommended spaces / users / usage modes
| Executive office reception areas | Formal black upholstered design complements high-rise executive office environments, provides structured professional seating for guest meetings | |
|---|---|---|
| Corporate lobby waiting zones | Durable commercial-grade materials withstand high daily visitor traffic, easy-to-clean surfaces reduce maintenance workload for facilities teams | |
| Small meeting room casual discussion areas | Modular 5-seat configuration supports small team discussions or client meetings without full conference table setup | |
| Financial and legal professional offices | Conservative black and chrome aesthetic conveys a professional, trustworthy image suitable for client-facing professional services | |
| Recommended companion configuration | Pair with light tone low-pile area rug and large indoor foliage plants for balanced visual contrast, as shown in the reference layout | |
| Enterprise visitor waiting bays | Cantilever frame design eliminates protruding legs that pose trip hazards in high-foot-traffic waiting zones, rubber foot pads protect polished stone flooring |
EU Market Access Requirements* EN Standards
| EN 13759:2005 | Office furniture - Reception seating, applies to stability, durability and safety requirements for public area office sofas | |
|---|---|---|
| EN 12520:2015 | Furniture - Strength, durability and safety - Requirements for domestic and contract seating, applies to load and fatigue performance of sofa frames | |
| EN 1022:2018 | Domestic furniture - Seating - Determination of stability, applies to anti-tip performance of seating units when loaded at seat edge |
US and Canada office-furniture standards
| ANSI/BIFMA X5.4-2021 | Lounge and Public Seating, applies to static load, impact resistance and durability testing for commercial reception seating | |
|---|---|---|
| ANSI/BIFMA X5.5-2021 | Desk Products, applies to stability, load and surface performance of glass coffee and side tables |
Standards applicable to China-market projects
| GB/T 3324-2017 | General technical requirements for wooden furniture, applicable to internal hardwood frame quality, dimensional tolerance and structural stability of sofa units | |
|---|---|---|
| GB/T 19995.1-2005 | Technical requirements for glass furniture, applicable to tempered glass tabletop safety, edge finishing and load performance | |
| GB 18584-2001 | Limit of harmful substances in wooden furniture, applicable to formaldehyde emission limits for internal frame materials and adhesives | |
| GB/T 16799-2008 | Polyurethane synthetic leather for furniture, applicable to abrasion resistance, color fastness and peeling strength of upholstery material |
This product must meet the following technical requirements: 1. GB/T 3324-2017: General technical requirements for wooden furniture, applicable to internal hardwood frame quality, dimensional tolerance and structural stability of sofa units; 2. GB/T 19995.1-2005: Technical requirements for glass furniture, applicable to tempered glass tabletop safety, edge finishing and load performance; 3. GB 18584-2001: Limit of harmful substances in wooden furniture, applicable to formaldehyde emission limits for internal frame materials and adhesives; 4. GB/T 16799-2008: Polyurethane synthetic leather for furniture, applicable to abrasion resistance, color fastness and peeling strength of upholstery material; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
