| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
| 3-seat sofa overall dimensions | 2400 mm W × 950 mm D × 850 mm H | |
|---|---|---|
| 3-seat sofa seat height | 420 mm | |
| 3-seat sofa seat depth | 600 mm | |
| 3-seat sofa armrest width | 180 mm | |
| 3-seat sofa plinth base height | 180 mm | |
| Single armchair overall dimensions (per unit) | 1100 mm W × 900 mm D × 830 mm H | |
| Single armchair seat height | 420 mm | |
| Single armchair seat depth | 580 mm | |
| Coffee table overall dimensions | 1400 mm W × 800 mm D × 450 mm H | |
| Coffee table upper service top thickness | 25 mm | |
| Coffee table drawer front height | 200 mm | |
| Coffee table plinth recess height | 30 mm | |
| Set minimum required floor footprint | 3800 mm W × 3000 mm D | |
| Finished Seat Cushion Thickness | 90 mm | |
| Backrest Padding Thickness | 70 mm | |
| Lumbar Support Zone Height | 240 mm | |
| Clear Width Between Armrests | 540 mm |
Net weight / load capacity / users / durability
| 3-seat sofa total static weight capacity | 340 kg | |
|---|---|---|
| Single armchair static weight capacity | 150 kg | |
| Coffee table top static load capacity | 50 kg | |
| Seat cushion foam density | 45 kg/m³ (D45) | |
| Backrest/armrest foam density | 35 kg/m³ (D35) | |
| Seat cushion foam thickness | 120 mm | |
| Upholstery abrasion resistance (Martindale) | 50000 rubs | |
| Recommended maximum occupancy for full set | 5 people | |
| Set total net weight range | 220 kg to 260 kg | |
| Seat Foam Density / Rebound Reference | 45 kg/m³ / 65% | |
| Back Foam Density Reference | 38 kg/m³ | |
| Upholstery Thickness / Abrasion Reference | 1.4 mm / 50000 cycles | |
| Five-star Base Static Load Reference | Acceptance target ≥120 kg; chair reference load 150 kg | |
| Caster Rolling Durability Reference | Acceptance target 30000 cycles | |
| Gas-lift Cycling Reference | Acceptance target 100000 cycles | |
| Upholstery Seam Pitch | 4 mm |
Core acceptance fields · Panels / hardware / frame / upholstery
| Seating upholstery | Dark grey smooth leather or 1.2 mm thick wear-resistant PU leather-look material | |
|---|---|---|
| Seating outer panel finish | Vertical channel stitched upholstery panels on armrests and back sides | |
| Seating internal frame | Kiln-dried solid wood + 15 mm thick plywood frame with corner-blocked joinery | |
| Seat support system | Sinuous steel spring support + high resilience polyurethane foam core | |
| Seating plinth base | Dark grey wood grain veneer finished engineered wood/solid wood enclosed plinth, no exposed legs | |
| Coffee tabletops and carcass | Grey wood grain veneer over 18 mm thick MDF/particleboard core | |
| Coffee table drawer components | Soft-close full extension ball bearing drawer slides, 2 equal-width front storage drawers | |
| Coffee table plinth base | Matching dark wood grain veneer recessed plinth base | |
| Upholstery stitching | Double-stitched seams with 8 mm stitch pitch on seat and arm edges | |
| Seating armrest padding | Integral foam padded armrests with upholstered top surface | |
| Seat Internal Support Board Thickness | 14 mm bent plywood or equivalent support board | |
| Backrest Internal Frame Thickness | 14 mm bent plywood/composite reinforced frame | |
| Gas-lift Engineering Specification | Recommended Class 4; outer tube 50 mm; stroke 100 mm | |
| Tilt Mechanism Plate Thickness | 2.5 mm cold-rolled steel | |
| Five-star Base Material Thickness | Metal base wall 3.5 mm; diameter 700 mm | |
| Caster Engineering Specification | 5 PU-tread swivel casters, 60 mm diameter | |
| Reference Color Count | Recommended 5upholstery colors and 2base finishes |
Adjustment / rotation / tilt / mobility / storage features
| Seating structure | Fixed static lounge seating with no recline, swivel, tilt or height adjustment mechanisms | |
|---|---|---|
| Coffee table storage | Two equal-size front-facing soft-close drawers in lower tier for storage of reception supplies/coasters | |
| Seating ergonomics | Slightly curved front seat edge to reduce leg pressure for extended seated waiting periods | |
| Layout configuration | Symmetrical face-to-face conversation layout with central coffee table positioned for shared access between all seats | |
| Surface maintenance | Smooth non-porous upholstery finish for spot cleaning of spills and stains in high-traffic reception areas | |
| Assembly requirement | Knock-down assembly requiring attachment of plinth bases to seating frames and coffee table components | |
| Floor protection | Felt glides pre-installed on plinth base bottoms to prevent scratching hard wood or tile flooring | |
| Recline Angle / Lock Reference | 125° with 3suggested lock positions | |
| Tilt Tension User-weight Range | Reference adjustment coverage 120 kg | |
| Height Adjustment Stroke | 100 mm continuous travel | |
| Rotation / Mobility Configuration | 360° swivel with 5-caster multidirectional movement |
Verified carton / gross weight / assembly / loading data
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Carton Dimensions | 850× 420× 720 mm | |
| Reference Packaged Gross Weight | 23 kg/set | |
| Reference Carton Volume | 0.26 m³/set | |
| Indicative 20GP Loading | 135 sets at 85% space utilization | |
| Indicative 40HQ Loading | 320 sets at 85% space utilization |
Recommended spaces / users / usage modes
| Executive office reception areas | Formal premium design suitable for welcoming guests and clients in corporate headquarters or senior management office zones | |
|---|---|---|
| High-end office waiting lounges | Durable commercial grade construction withstands frequent daily use in shared public waiting spaces | |
| VIP meeting break-out zones | Comfortable padded seating supports short to medium length informal meetings between staff and visitors | |
| Luxury hotel executive club lounges | Cohesive wood and dark grey finish matches upscale hospitality interior design palettes | |
| Boutique corporate boardroom ante-rooms | Compact symmetrical footprint fits in pre-function spaces adjacent to formal meeting rooms | |
| Recommended complementary configuration | Pair with low-pile commercial area rug (minimum 4m x 3.2m) and side accent tables for a complete reception zone | |
| Recommended Matching Desk Size | 2.4 m executive desk | |
| Reference Daily Use Duration | 8 hours/day; confirm by ergonomic testing |
EU Market Access Requirements* EN Standards
| EN 1335-1:2020 | Office furniture seating safety and dimensional requirements reference for commercial lounge seating structural stability | |
|---|---|---|
| EN 1022:2018 | Domestic and contract seating stability test method reference to verify seating does not tip under normal use loads |
US and Canada office-furniture standards
| ANSI/BIFMA X5.4-2021 | Lounge and public seating safety and performance standard reference for static load, durability and stability requirements in commercial office settings |
|---|
Standards applicable to China-market projects
| GB/T 3324-2017 | General technical requirements for wooden furniture, applicable to plinth bases and coffee table wood components for dimensional stability and structural integrity | |
|---|---|---|
| GB/T 19001-2016 | Quality management system requirement reference for commercial furniture manufacturing consistency | |
| GB 20400-2006 | Leather and fur limit of harmful substances, applicable if genuine leather upholstery is specified, for formaldehyde and heavy metal content limits |
This product must meet the following technical requirements: 1. GB/T 3324-2017: General technical requirements for wooden furniture, applicable to plinth bases and coffee table wood components for dimensional stability and structural integrity; 2. GB/T 19001-2016: Quality management system requirement reference for commercial furniture manufacturing consistency; 3. GB 20400-2006: Leather and fur limit of harmful substances, applicable if genuine leather upholstery is specified, for formaldehyde and heavy metal content limits; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
