| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
| Overall set footprint | 1800 x 1800 mm | |
|---|---|---|
| Long bench seat dimensions (each section) | 1200 x 450 x 450 mm | |
| Round side table dimensions | 600 x 600 x 750 mm | |
| Table base dimensions | 300 x 300 x 720 mm | |
| Cylindrical stool dimensions (each) | 350 x 350 x 450 mm | |
| Stool upholstered section height | 220 mm | |
| Stool base diameter | 350 mm | |
| Bench foot glide height | 10 mm | |
| Table top thickness | 25 mm | |
| Knee clearance under table | 720 mm | |
| Finished Seat Cushion Thickness | 90 mm | |
| Backrest Padding Thickness | 70 mm | |
| Lumbar Support Zone Height | 240 mm | |
| Clear Width Between Armrests | 540 mm |
Net weight / load capacity / users / durability
| Total set weight | 125 kg | |
|---|---|---|
| Per-seat static load capacity | 150 kg | |
| Seating capacity | 6 users | |
| Fabric abrasion resistance | 50000 Martindale cycles | |
| Foam density (seat cushions) | 40 kg/m³ | |
| Foam indentation load deflection (seat) | 210 N | |
| Leveling glide adjustment range | 5 mm | |
| Total set net weight | 125 kg | |
| Total seating capacity | 6 users | |
| Seat foam density | 40 kg/m³ |
Core acceptance fields · Panels / hardware / frame / upholstery
| Bench outer upholstery | Woven polyester fabric | |
|---|---|---|
| Bench internal cushioning | High-density polyurethane foam | |
| Bench internal frame | 18mm thick plywood | |
| Bench foot glides | Injection-molded polypropylene | |
| Side table top | 25mm thick MDF with matte white thermofoil laminate | |
| Side table base | Fabric-upholstered tapered MDF structure | |
| Stool upper section | Woven polyester fabric upholstery over foam padding | |
| Stool lower base | Matte white painted MDF | |
| Adhesive and upholstery hardware | Commercial grade staples and low-VOC adhesive | |
| Seam construction | Reinforced stitched seams with 8mm stitch pitch | |
| Bench upholstery covering | Woven polyester fabric | |
| Bench internal structural frame | 18mm thick birch plywood |
Adjustment / rotation / tilt / mobility / storage features
| Modular arrangement capability | Freestanding units can be reconfigured into L-shape, linear, or separate cluster layouts | |
|---|---|---|
| Non-marking floor protection | All ground contact points fitted with smooth plastic glides | |
| Lightweight repositioning | Individual bench sections weigh 32 kg, stools weigh 8 kg, table weighs 45 kg | |
| Mixed-height use support | 450mm seat height works with 750mm table height for casual laptop work, coffee breaks, or impromptu meetings | |
| Stain-resistant fabric option compatibility | Standard woven fabric can be specified with stain-repellent treatment for high-traffic break areas | |
| Color customization | Upholstery available in 2 standard two-tone colorways (cyan/white, orange/white) | |
| Edge safety design | All hard corners on benches, table, and stools have rounded 15mm radius edges | |
| Stable base design | Tapered table base has wider floor footprint than top attachment point | |
| Modular reconfiguration capability | Freestanding individual units rearrange into L-shape, linear, or separate cluster layouts without permanent connecting hardware, supporting layout changes for different event sizes and collaboration needs | |
| Tool-free repositioning | Individual bench sections weigh 32 kg, stools weigh 8 kg, table weighs 45 kg, allowing 2 staff members to reconfigure the full set without specialized moving equipment | |
| Ergonomic casual use alignment | 450mm seat height paired with 750mm table height supports relaxed posture for casual laptop work, coffee breaks, and impromptu 30 minute meetings, aligned to seated elbow height for upper body comfort | |
| Stain-resistant treatment compatibility | Standard woven fabric accepts aftermarket fluoropolymer stain-repellent treatment, recommended for break areas with regular food and beverage exposure to extend service life by 30% |
Verified carton / gross weight / assembly / loading data
| Number of shipping cartons | 5 cartons | |
|---|---|---|
| Shipping carton dimensions (per long bench) | 1250 x 500 x 500 mm | |
| Shipping carton dimensions (side table) | 650 x 650 x 800 mm | |
| Shipping carton dimensions (per stool) | 400 x 400 x 500 mm | |
| Total gross shipping weight | 145 kg | |
| Total shipping volume (CBM) | 0.82 CBM | |
| On-site assembly time | 15 minutes | |
| 20ft GP container loading quantity | 52 sets | |
| 40ft HQ container loading quantity | 128 sets | |
| Packaging materials | 5-layer corrugated carton, EPS corner protectors, PE stretch wrap, plastic bag wrapping for upholstered surfaces |
Recommended spaces / users / usage modes
| Office open collaboration zones | Suitable for impromptu team discussions, quick check-ins, and individual focus breaks, with flexible modular layout for dynamic workspaces | |
|---|---|---|
| Educational facility common areas | Ideal for student lounges, library break zones, and campus lobby waiting areas, with durable upholstery and safe rounded edges for high-traffic use | |
| Co-working space break areas | Supports flexible short-term seating for members, visitors, and small meeting groups, with movable units to adapt to different event sizes | |
| Reception and waiting areas | Two-tone bright color palette creates a welcoming visual impression for office lobbies, healthcare waiting rooms, and retail customer areas | |
| Café and break room seating | Easy-to-clean fabric options and stable table surface support casual dining, coffee service, and laptop use for employees or customers | |
| Exhibition and event temporary spaces | Lightweight freestanding design allows quick reconfiguration for trade show booths, conference breakout zones, and pop-up event seating | |
| Recommended pairing configuration | Place the round table at the internal corner of the L-shaped benches, position stools opposite the open corner to create a 6-person informal discussion cluster | |
| Corporate reception and waiting areas | Two-tone bright cyan/orange/white color palette creates a welcoming visual impression for office lobbies, healthcare waiting rooms, and retail customer waiting zones, with stain-resistant fabric options for high-use environments |
EU Market Access Requirements* EN Standards
| EN 13761:2002 | Furniture - Seating for non-domestic use, applicable for structural stability, load capacity, and durability requirements for commercial lounge seating | |
|---|---|---|
| EN 1022:2018 | Furniture - Seating - Determination of stability, applicable to verify benches and stools resist tipping during normal use and when users shift weight | |
| EN 15372:2016 | Furniture - Strength, durability and safety - Requirements for non-domestic tables, applicable to the side table for load capacity and structural integrity | |
| EN 13356:2011 | Applicable standards and test results require confirmation |
US and Canada office-furniture standards
| ANSI/BIFMA X5.4-2021 | Lounge and Public Seating standard, applicable for static load, fatigue testing, and stability verification for all seating units | |
|---|---|---|
| ANSI/BIFMA X5.5-2021 | Desk Products standard, applicable for the side table top load, edge load, and stability performance testing | |
| ANSI/BIFMA e3-2019 | Furniture Sustainability Standard, applicable for specifying low-VOC materials, recycled content, and end-of-life disassembly for LEED project compliance | |
| ANSI/BIFMA X7.1-2011 | Standard for Formaldehyde and TVOC Emissions of Low-Emitting Office Furniture Systems and Seating, applicable for indoor air quality specification for office installation |
Standards applicable to China-market projects
| GB/T 3324-2017 | General technical requirements for wooden furniture, applicable to MDF and plywood structural components for dimensional stability and edge finish quality | |
|---|---|---|
| GB 18584-2001 | Indoor decorating and refurbishing materials - limit of harmful substances of wood based furniture, required for formaldehyde emission limits for all composite wood components | |
| GB/T 19889.7-2005 | Acoustics - Measurement of sound insulation in buildings and of building elements, applicable for open plan office use to confirm soft seating contributes to ambient noise reduction | |
| GB 20286-2006 | Fire safety requirements for flame retardant products and components in public places, applicable for upholstery fabric and foam fire performance specification for public space installation | |
| GB/T 27904-2011 | Furniture - Test method for durability of upholstered furniture seating, applicable to verify cushion durability and frame strength over 100000 simulated use cycles |
This product must meet the following technical requirements: 1. GB/T 3324-2017: General technical requirements for wooden furniture, applicable to MDF and plywood structural components for dimensional stability and edge finish quality; 2. GB 18584-2001: Indoor decorating and refurbishing materials - limit of harmful substances of wood based furniture, required for formaldehyde emission limits for all composite wood components; 3. GB/T 19889.7-2005: Acoustics - Measurement of sound insulation in buildings and of building elements, applicable for open plan office use to confirm soft seating contributes to ambient noise reduction; 4. GB 20286-2006: Fire safety requirements for flame retardant products and components in public places, applicable for upholstery fabric and foam fire performance specification for public space installation; 5. GB/T 27904-2011: Furniture - Test method for durability of upholstered furniture seating, applicable to verify cushion durability and frame strength over 100000 simulated use cycles; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
