| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
| Overall 3-seater sofa dimensions | 1900 x 850 x 750 mm | |
|---|---|---|
| Single armchair dimensions | 820 x 780 x 750 mm | |
| Coffee table dimensions | 1200 x 600 x 450 mm | |
| Side end table dimensions | 600 x 600 x 500 mm | |
| Seat height from floor | 420 mm | |
| Seat depth for all seating units | 580 mm | |
| Backrest height above seat | 330 mm | |
| Armrest height above floor | 620 mm | |
| Steel frame leg profile width | 50 mm | |
| Clearance under seating units | 120 mm | |
| Table top glass thickness | 12 mm | |
| Seat Cushion Thickness | 180 mm | |
| Back Cushion Thickness | 160 mm | |
| Leg Height / Floor Clearance | 160 mm |
Net weight / load capacity / users / durability
| Total set net weight | 185 kg | |
|---|---|---|
| 3-seater sofa static load capacity | 450 kg | |
| Seat foam compression recovery rate | 92% | |
| Upholstery abrasion resistance | 50000 Martindale cycles | |
| Recommended maximum daily occupancy | 5 persons total | |
| Chrome frame corrosion resistance service life | 5 years | |
| Chrome frame indoor corrosion resistance service life | 5 years | |
| Per-seat cushion fatigue resistance | 30000 load cycles | |
| Seat Foam Density / Rebound | 40 kg/m³ / 60% | |
| Upholstery Abrasion Reference | Fabric 60000 cycles; leather-class cover 1.4 mm |
Core acceptance fields · Panels / hardware / frame / upholstery
| Seat and back upholstery | Black matte faux leather (PU leather), 1.0mm thickness, grid tufted detailing on seat and back cushions | |
|---|---|---|
| Internal seat cushion padding | 45mm thick high-density polyurethane foam, 40kg/m³ density | |
| Backrest padding | 30mm thick medium-density polyurethane foam, 30kg/m³ density | |
| Support frame for all seating | Polished chrome-plated square steel tube, 1.2mm wall thickness, cantilever sled base design | |
| Internal seating support structure | 15mm thick multilayer plywood seat base | |
| Coffee and side table tops | 12mm thick black tempered safety glass, polished flat edge finish | |
| Table support frames | Polished chrome-plated square steel tube, 1.0mm wall thickness, four-leg open frame design matching seating frame finish | |
| Frame floor protection pads | 8mm thick non-slip black rubber pads fitted at base of all frame legs | |
| Stitching on upholstery | High-tenacity polyester thread, 8mm seam stitch pitch | |
| Seat cushion core padding | 45mm thick high-density polyurethane foam, 40kg/m³ density | |
| Backrest cushion padding | 30mm thick medium-density polyurethane foam, 30kg/m³ density | |
| Seating structural support frame | Polished chrome-plated square steel tube, 1.2mm wall thickness, cantilever sled base design |
Adjustment / rotation / tilt / mobility / storage features
| Seating design function | Fixed upright position seating with no recline or adjustment, designed for formal short-to-medium duration reception visits | |
|---|---|---|
| Tufted upholstery function | Grid tufting on seat and back holds foam padding in place, prevents cushion shifting and retains smooth upholstery appearance over repeated use | |
| Cantilever sled base function | Open chrome sled base provides stable weight distribution without separate front/back legs, reduces floor obstruction and simplifies cleaning under seating units | |
| Table set coordination function | Matching chrome and black glass tables are sized to serve all seating positions, coffee table centered between all three seats, side table positioned for adjacent single chair and sofa end use | |
| Upholstery maintenance function | Smooth non-porous faux leather surface allows wipe-clean maintenance with standard office cleaning products, suitable for high-traffic public reception areas | |
| Frame floor protection function | Rubber base pads on all frame feet prevent scuffing and scratching of polished tile, stone or hardwood flooring common in office reception spaces | |
| Table surface function | Tempered glass table tops resist heat from hot beverage cups and minor impact from serving items, non-porous surface prevents staining from spills | |
| Modular layout function | Separate individual seating and table units allow flexible arrangement to fit different reception room sizes and layout requirements | |
| Seating support function | Fixed upright ergonomic position with no recline or height adjustment, 100° seat-to-back angle optimized for formal short-to-medium duration reception visits | |
| Tufted upholstery retention function | Grid tufting anchors foam padding to the internal substrate at 200mm intervals, prevents cushion shifting and maintains smooth upholstery appearance over repeated use | |
| Cantilever sled base stability function | Continuous chrome sled base distributes occupant weight across the full length of the frame, reduces tripping hazards from individual legs and simplifies cleaning under seating units | |
| Coordinated table serving function | Matching chrome-frame black glass tables are positioned to provide surface access within 400mm of every seating position, central coffee table serves the 3-seater and one armchair, side table serves the second armchair and sofa end |
Verified carton / gross weight / assembly / loading data
| Number of shipping cartons per complete set | 6 cartons | |
|---|---|---|
| Largest carton dimensions (3-seater sofa) | 1950 x 880 x 380 mm | |
| Total gross shipping weight per set | 210 kg | |
| Total shipping volume (CBM) per set | 1.8 CBM | |
| On-site assembly time | 60 minutes | |
| 20ft GP container loading quantity | 15 sets | |
| 40ft HQ container loading quantity | 38 sets | |
| Packaging protection materials | 50mm thick EPE foam corner protection, PE stretch wrap, corrugated carton liners | |
| Total gross shipping weight per complete set | 210 kg | |
| Total shipping volume per complete set | 1.8 CBM |
Recommended spaces / users / usage modes
| Office reception waiting areas | Suited for corporate lobby and visitor waiting zones, formal black and chrome design presents a professional business appearance for guest reception | |
|---|---|---|
| Auto dealership customer lounges | Appropriate for automotive showroom customer waiting areas, durable wipe-clean surfaces withstand high daily visitor traffic, formal design aligns with premium retail brand environments | |
| Executive office meeting zones | Can be used in small executive office spaces for informal guest meetings, compact footprint fits standard private office dimensions without occupying excessive work space | |
| Public service waiting rooms | Suitable for bank, government or service center waiting areas, high abrasion resistant upholstery and robust metal frame support frequent public use | |
| Small business lounge areas | Fits startup and small company lounge spaces, modular units allow flexible layout to adapt to irregular room shapes, coordinated set removes need for separate furniture matching | |
| Cleaning and maintenance suitability | Ideal for spaces requiring quick daily cleaning, non-porous surfaces can be wiped between visitor uses without specialized upholstery cleaning equipment | |
| Corporate office reception lobbies | Suited for corporate entrance and visitor waiting zones, formal black and chrome aesthetic presents a professional business appearance for guest reception, durable surfaces withstand daily visitor traffic | |
| Automotive dealership customer lounges | Appropriate for automotive showroom customer waiting areas, wipe-clean surfaces handle high daily visitor volume, polished chrome and black finish aligns with premium retail brand environments |
EU Market Access Requirements* EN Standards
| Office furniture safety recommendation | EN 13761:2002 | |
|---|---|---|
| Furniture glass safety recommendation | EN 12150:2015 | |
| Upholstered furniture fire safety recommendation | EN 1021:2014 | |
| Office visitor seating safety recommendation | EN 13761:2002 | |
| Furniture surface durability recommendation | EN 12720:2009 |
US and Canada office-furniture standards
| North America procurement and testing reference | ANSI/BIFMA X5.4 Public and Lounge Seating |
|---|
Standards applicable to China-market projects
| Upholstered furniture safety recommendation | GB 28007 | |
|---|---|---|
| Formaldehyde emission recommendation | GB 18580 | |
| Leather/PU upholstery recommendation | GB/T 16799 | |
| Tempered glass safety recommendation | GB 15763.2 | |
| PU upholstery performance recommendation | GB/T 16799 | |
| Furniture hardware corrosion recommendation | GB/T 3325 |
This product must meet the following technical requirements: 1. Upholstered furniture safety recommendation: GB 28007; 2. Formaldehyde emission recommendation: GB 18580; 3. Leather/PU upholstery recommendation: GB/T 16799; 4. Tempered glass safety recommendation: GB 15763.2; 5. PU upholstery performance recommendation: GB/T 16799; 6. Furniture hardware corrosion recommendation: GB/T 3325; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
