Time

Field

Original Value

Corrected Value

Note / Status

No correction records yet. Found an error? Click the flag at the end of a row to report it.

PRODUCT MODULE 01 / 06

Physical Dimensions

Automatic mm / inch conversion · Core engineering specifications

Data source: Structured from factory data; final measured values prevail.

Overall dimensions (W × D × H)	600 × 600 × 1000 mm
Seat height	470 mm
Seat width	600 mm
Seat depth	460 mm
Seat panel thickness	22 mm
Backrest total height	530 mm
Backrest slat count	5
Front leg cross-section	35 x 35 mm
Stretcher height from floor	295 mm
Rear leg spacing (width)	430 mm
Finished Seat Cushion Thickness	90 mm
Backrest Padding Thickness	70 mm
Lumbar Support Zone Height	240 mm
Clear Width Between Armrests	540 mm

PRODUCT MODULE 02 / 06

Weight, Load & Performance

Net weight / load capacity / users / durability

Data source: Product performance data; verify exact test conditions before procurement.

Static weight capacity	159 kg
Net weight per chair	13 kg
Recommended user count per chair	1
Floor glide static load rating	160 kg
Joinery static shear strength	900 N
Finish abrasion resistance (Taber)	400 cycles
Warranty period	3 years
Seat Foam Density / Rebound Reference	45 kg/m³ / 65%
Back Foam Density Reference	38 kg/m³
Upholstery Thickness / Abrasion Reference	1.4 mm / 50000 cycles

PRODUCT MODULE 03 / 06

Materials & Structure

Core acceptance fields · Panels / hardware / frame / upholstery

Data source: Subject to the factory material list and inspection report.

Chair frame (legs, rails, stiles)	Solid hardwood with dark brown walnut-toned stain finish
Seat panel	Solid flat hardwood panel, 22mm thick
Backrest slats	Solid hardwood vertical slats, 15mm thick each
Backrest top rail	Solid hardwood with carved decorative edge detail
Cross stretchers	Solid hardwood horizontal bracing between legs
Seat corner reinforcement	Solid wood corner blocks glued and screwed under seat
Floor contact glides	Injection-molded plastic protective glides, 5mm thick
Surface finish	Nitrocellulose lacquer topcoat, satin sheen
Seat Internal Support Board Thickness	14 mm bent plywood or equivalent support board
Backrest Internal Frame Thickness	14 mm bent plywood/composite reinforced frame
Gas-lift Engineering Specification	Recommended Class 4; outer tube 50 mm; stroke 100 mm
Tilt Mechanism Plate Thickness	2.5 mm cold-rolled steel

PRODUCT MODULE 04 / 06

Functions & Adjustment

Adjustment / rotation / tilt / mobility / storage features

Data source: Functional configuration; the supplier specification prevails.

Back support function	5 vertical slats plus carved top rail provide upright lumbar support for dining posture
Structural stability function	Dual-set horizontal cross stretchers reduce leg racking under dynamic seating load
Seating function	Flat solid wood seat provides even weight distribution for short-duration dining use
Floor protection function	Plastic glides on each leg base prevent hard floor scuffing and reduce movement noise
Stacking capability	Non-stackable fixed leg design for individual placement at dining tables
Assembly requirement	Knock-down assembly with pre-drilled holes and included hardware
Recline Angle / Lock Reference	125° with 3suggested lock positions
Tilt Tension User-weight Range	Reference adjustment coverage 120 kg
Height Adjustment Stroke	100 mm continuous travel
Rotation / Mobility Configuration	360° swivel with 5-caster multidirectional movement

PRODUCT MODULE 05 / 06

Packaging & Logistics

Verified carton / gross weight / assembly / loading data

Data source: Reference for export quotations and container planning.

Reference Package Count	1 set / 2 cartons
Reference Assembly Time	40 minutes per set
Reference Carton Dimensions	850× 420× 720 mm
Reference Packaged Gross Weight	23 kg/set
Reference Carton Volume	0.26 m³/set
Indicative 20GP Loading	135 sets at 85% space utilization
Indicative 40HQ Loading	320 sets at 85% space utilization

PRODUCT MODULE 06 / 06

Applications & Usage

Recommended spaces / users / usage modes

Data source: Recommended applications based on product form and category.

Residential dining room	Compatible with standard 750mm height dining tables for daily family meal seating
Restaurant and cafe seating	Suitable for commercial casual dining venues with traditional interior design themes
Hotel guest room dining area	Matches traditional Chinese or classic European hotel furnishing schemes for in-room dining
Conference auxiliary seating	Usable as side seating in small meeting rooms or break rooms for short meetings
Recommended table matching	Paired with 1800 mm long solid wood dining tables to seat 6people
Recommended Matching Desk Size	2.4 m executive desk
Reference Daily Use Duration	8 hours/day; confirm by ergonomic testing

STANDARD S1

EU Market Entry Requirements * EN Standards

EU Market Access Requirements* EN Standards

EN 12520:2015	Furniture – Strength, durability and safety for domestic seating, applicable to residential dining use
EN 1022:2018	Furniture – Seating – Determination of stability, applicable to tip-resistance verification

STANDARD S3

Standards Applicable to China-Market Projects * GB Standards

Standards applicable to China-market projects

GB/T 3324-2017	General technical requirements for wooden furniture, applicable to strength and dimensional stability checks
GB 18584-2001	Limit of harmful substances in wood furniture, applicable to formaldehyde emission testing
GB/T 10357.3-2013	Furniture mechanical performance test for chairs and stools, applicable to static/dynamic load verification

Standardized tender description text

This product must meet the following technical requirements:
1. GB/T 3324-2017: General technical requirements for wooden furniture, applicable to strength and dimensional stability checks;
2. GB 18584-2001: Limit of harmful substances in wood furniture, applicable to formaldehyde emission testing;
3. GB/T 10357.3-2013: Furniture mechanical performance test for chairs and stools, applicable to static/dynamic load verification;
Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.

GENERATED EXPORTS

Ready-to-use export tools

Export data is generated from the current published product record.

Technical Report PDF

Directly download an English report in metric or imperial units.

PDF · DSC-SB5-001

Complete Parameter Workbook

Download all product information and parameter modules in English.

XLSX · DSC-SB5-001

International Listing Template

English title, specifications, materials, standards and purchasing fields.

XLSX · LISTING

Customs Declaration Data

Prepare customs description, material, usage, dimensions and declaration elements.

CUSTOMS · DSC-SB5-001Open Export Tool

Quick Actions

Post an RFQ

Product Description

The Dark Brown Solid Wood Carved Top Rail Slat-Back Armless Dining Side Chair (model DSC-SB5) is an unbranded wooden dining side chair rooted in traditional design, featuring a refined dark brown walnut-toned finish that pairs seamlessly with classic interior schemes. Its visual profile is defined by a clean armless form, five evenly spaced vertical solid wood slats forming the backrest, and a carved decorative edge on the top rail that adds subtle, timeless ornamental detail without overpowering surrounding decor. The fixed four-leg structure is anchored by dual sets of horizontal cross stretchers, creating a balanced, symmetrical layout suitable for both individual placement and uniform arrangement around dining surfaces.
Crafted entirely from solid hardwood for its frame, seat panel, backrest slats, top rail, cross stretchers, and internal corner reinforcements, the chair is built for reliable daily use. The 22mm thick flat solid wood seat is supported by a 14mm bent plywood or equivalent internal board, with glued and screwed solid wood corner blocks reinforcing seat joints for long-term structural integrity. Each leg is fitted with 5mm thick injection-molded plastic protective glides at the base, and all wood surfaces are coated in a satin sheen nitrocellulose lacquer topcoat for a smooth, polished feel.
Functionally, the chair is engineered for upright, comfortable short-duration seating: the five vertical back slats and carved top rail deliver targeted lumbar support aligned with standard dining posture, while dual cross stretchers minimize leg racking under dynamic seating loads. The flat solid wood seat distributes user weight evenly, and the integrated plastic glides prevent scuffing on hard flooring while reducing noise during repositioning. It supports a static weight capacity of 159kg, intended for single-user seating, with a fixed non-stackable design suited for permanent table placement. The chair ships in knock-down form with pre-drilled holes and included hardware, requiring 40 minutes of assembly per unit, and is backed by a 3-year warranty.
This chair is versatile across both residential and commercial spaces. In residential settings, it works with standard 750mm height dining tables for daily family meals, and pairs with 1800mm long solid wood dining tables to seat six guests. Commercially, it fits casual dining restaurants and cafes with traditional design themes, aligns with classic European or traditional Chinese furnishing schemes in hotel guest room dining areas, and serves as practical auxiliary seating for small meeting rooms and break spaces. When procuring this model, note that each unit ships across two cartons, plan for sufficient on-site assembly time, confirm alignment with existing interior finish palettes, and account for its non-stackable design when planning storage or layout flexibility for high-turnover spaces.

Dark Brown Solid Wood Carved Top Rail Slat-Back Armless Dining Side Chair Specifications

Suppliers and stock