| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
| Overall table dimensions | 2000 x 2000 x 775 mm | |
|---|---|---|
| Central lazy Susan diameter | 1000 mm | |
| Tabletop thickness | 50 mm | |
| Pedestal base top diameter | 1300 mm | |
| Pedestal base floor contact diameter | 1200 mm | |
| Lazy Susan turntable thickness | 30 mm | |
| Per-seat dining width | 628 mm | |
| Under-table knee clearance height | 680 mm | |
| Table edge overhang from pedestal | 350 mm | |
| Recessed turntable lip depth | 10 mm | |
| Finished Top Thickness | 45 mm | |
| Effective Knee Clearance | 680 mm high and 900 mm wide per main seat | |
| Leg / Support Section | 80 mm main section with 2 mm metal wall | |
| Cable Opening Size | 80 mm diameter; cable tray depth 120 mm |
Net weight / load capacity / users / durability
| Table net weight | 114 kg | |
|---|---|---|
| Distributed tabletop static load capacity | 150 kg | |
| Lazy Susan rated rotating load | 30 kg | |
| Standard seating capacity | 10 diners | |
| Surface wear resistance rating | 4000 abrasion cycles | |
| Structural warranty period | 2 years | |
| Lazy Susan rotation smoothness lifecycle | 20000 rotations | |
| Top Static Load Reference | 150 kg uniformly distributed | |
| Drawer Slide Load / Life | 45 kg/pair; 50000 cycles | |
| Hinge Opening Life | Acceptance target 80000 cycles |
Core acceptance fields · Panels / hardware / frame / upholstery
| Tabletop construction | Solid walnut-stained hardwood, 50mm thick, bullnose rounded edge | |
|---|---|---|
| Pedestal base construction | Solid hardwood tapered cylinder, veneered outer face for seamless finish | |
| Lazy Susan turntable | Matching solid hardwood top, flush recessed into table center | |
| Rotation hardware | Concealed steel ball bearing swivel mechanism under turntable | |
| Tabletop finish | Low-VOC matte polyurethane sealant, 0.15mm thick coat | |
| Joinery hardware | 10mm steel dowels and wood glue for tabletop-to-pedestal connection | |
| Floor contact base | Felt floor protection pads fitted to base bottom edge | |
| Wood moisture content | 10% | |
| Primary Panel Thickness | 25 mm; load-bearing top may use 40 mm composite build-up | |
| Edge Band Thickness | 2 mm | |
| Metal Frame Wall Thickness | 2 mm cold-rolled steel | |
| Primary Connector Specification | Reference M6-M8 with at least 2 fixing points per main support |
Adjustment / rotation / tilt / mobility / storage features
| Lazy Susan rotation | 360-degree full-circle smooth rotation on concealed ball bearings | |
|---|---|---|
| Pedestal support design | Single central tapered cylinder base, no perimeter legs | |
| Assembly requirement | Two-piece knockdown assembly, tabletop mounts to pre-built pedestal | |
| Surface functionality | Stain-resistant sealed finish, suitable for hot serving dishes up to 80°C | |
| Turntable alignment | Recessed lip keeps lazy Susan centered during rotation | |
| Weight distribution | Wide floor contact base eliminates tipping risk when fully loaded | |
| Cable Management Capacity | Reference capacity 10power/data cables; tray load 10 kg | |
| Reference Reassembly Count | Main joints should support 5controlled assembly cycles |
Verified carton / gross weight / assembly / loading data
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Package Dimensions | 2100× 1100× 300 mm | |
| Reference Packaged Gross Weight | 90 kg/set in 2 cartons | |
| Reference Packaging Volume | 0.55 m³/set |
Recommended spaces / users / usage modes
| Residential dining room | Serves 10 diners for family meals and formal dinner parties | |
|---|---|---|
| Private restaurant dining room | Accommodates group dining and shared dish service with central turntable | |
| Banquet and event space | Supports catered events and multi-guest dining configurations | |
| Open-concept living dining area | Minimalist tapered silhouette complements modern and mid-century interiors | |
| Recommended pairing | Works with armless dining chairs 450mm seat height for comfortable leg clearance |
EU Market Access Requirements* EN Standards
| EN 12521:2015 | Applies to safety, strength and durability requirements for domestic dining tables | |
|---|---|---|
| EN 13722:2004 | Applies to surface finish resistance to cold liquids for furniture | |
| EN 1730:2000 | Applies to test methods for table stability and structural strength |
Standards applicable to China-market projects
| GB/T 3324-2017 | Applies to general technical requirements for wooden dining furniture | |
|---|---|---|
| GB 18584-2001 | Applies to formaldehyde emission limits for indoor wooden furniture | |
| GB/T 4893.8-2013 | Applies to surface wear resistance testing for furniture finishes |
This product must meet the following technical requirements: 1. GB/T 3324-2017: Applies to general technical requirements for wooden dining furniture; 2. GB 18584-2001: Applies to formaldehyde emission limits for indoor wooden furniture; 3. GB/T 4893.8-2013: Applies to surface wear resistance testing for furniture finishes; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
