| Submitted | Field | Original | 修改后参数 | Note / Status |
|---|---|---|---|---|
No parameter correction records exist. If you spot inaccurate data, click the flag icon at the end of the corresponding row to submit feedback. | ||||
Automatic mm / inch conversion · Core engineering specifications
| Overall dimensions | 900 x 400 x 1800 mm | |
|---|---|---|
| Single compartment internal dimensions | 400 x 380 x 340 mm | |
| Door panel thickness | 0.8 mm | |
| Cabinet side/back panel thickness | 0.7 mm | |
| Ventilation perforation diameter | 6 mm | |
| Label holder size per door | 90 x 60 mm | |
| Bottom compartment clearance from floor | 100 mm | |
| Door opening clearance angle | 110 degrees | |
| Internal shelf count per compartment | 0 | |
| Primary Component Thickness | 40 mm according to load-bearing role | |
| Hardware / Moving-part Clearance | 5 mm operating clearance |
Net weight / load capacity / users / durability
| Product net weight | 72 kg | |
|---|---|---|
| Static load capacity per compartment | 25 kg | |
| Recommended maximum user count | 10 | |
| Door hinge cycle rating | 50000 open/close cycles | |
| Lock cylinder durability | 20000 key insert/remove cycles | |
| Surface scratch resistance rating | 2H | |
| Reference Static Load | 150 kg depending on category | |
| Moving-part Durability Reference | Acceptance target 50000 cycles | |
| Recommended Procurement Warranty | Structure 5 years; hardware 3 years |
Core acceptance fields · Panels / hardware / frame / upholstery
| Cabinet body shell | 304 stainless steel sheet, brushed finish, welded corner construction | |
|---|---|---|
| Door panels | 0.8mm thick 304 stainless steel, reinforced folded edge | |
| Ventilation panels | Integral punched stainless steel on lower door section, 3 columns of 6 holes per door | |
| Locking hardware | Zinc alloy keyed cam locks, 2 keys per lock, chrome plated finish | |
| Door hinges | Stainless steel concealed pin hinges, welded to cabinet frame | |
| Label holders | Recessed stainless steel card slots, welded to upper door section | |
| Handles | Integrated recessed stainless steel pull handles, formed as part of door panel | |
| Base plinth | Folded stainless steel closed base, welded to cabinet bottom | |
| Door edge trim | Continuous black magnetic door seal gasket | |
| Primary Connector Specification | Reference M6-M10 with at least 2 fixing points at major joints | |
| Reference Finish / Color Count | Recommended 6finish options |
Adjustment / rotation / tilt / mobility / storage features
| Individual compartment locking | Each door is secured by an independent keyed cam lock, supplied with 2 unique keys per compartment | |
|---|---|---|
| Passive ventilation | Every door features a punched perforated vent grid at the lower section to allow air circulation and prevent odor buildup for stored clothing | |
| User identification | Each door has a recessed label card holder at the upper left section to display user name, number or assignment information | |
| Door operation | Hinged doors swing outward to 110 degrees, held closed by magnetic seal when not locked, no automatic return mechanism | |
| Free-standing installation | Integral welded base allows placement on level finished floors without wall anchoring for standard use, anchor points provided for optional seismic securing | |
| Corrosion resistance | Stainless steel construction resists moisture and rust, suitable for high-humidity environments such as factory changing rooms or pool areas | |
| Surface cleaning | Smooth brushed stainless steel surface requires no painting, can be wiped clean with standard disinfectants without finish damage | |
| Lock mounting position height from compartment bottom | 180 mm | |
| Reference Adjustment / Operating Range | 100 mm or 120° where applicable |
Verified carton / gross weight / assembly / loading data
| Number of shipping packages | 1 | |
|---|---|---|
| Shipping carton dimensions | 960 x 460 x 1860 mm | |
| Gross shipping weight | 82 kg | |
| Shipping volume per unit | 0.82 CBM | |
| On-site assembly time | 20 minutes | |
| 20ft GP container loading quantity | 27 units | |
| 40ft HQ container loading quantity | 66 units | |
| Reference Package Count | 1 set / 2 cartons | |
| Reference Assembly Time | 40 minutes per set | |
| Reference Packaging Volume | 0.8 m³/set |
Recommended spaces / users / usage modes
| Factory employee changing rooms | 10 individual lockable compartments provide secure personal storage for production line staff, stainless steel construction resists dust and frequent cleaning | |
|---|---|---|
| Office staff personal storage | Compact footprint fits office break rooms or corridor areas to store employee bags, personal items and spare workwear, ventilated design prevents odor buildup | |
| Gym and pool changing areas | Moisture-resistant stainless steel construction withstands high humidity and wet items, slotted vents allow damp clothing to air dry | |
| School and campus facilities | Durable metal construction resists rough student use, individual key locks prevent theft of personal belongings, easy to clean surface meets public facility hygiene requirements | |
| Hospital and cleanroom staff areas | Non-porous stainless steel surface can be disinfected regularly, sealed construction prevents dust accumulation for medical facility environments |
European market access and chemical requirements
| EN 14073-2:2004 | Applicable European standard for office storage furniture, specifies safety and strength requirements for lockable storage cabinets | |
|---|---|---|
| EN 16121:2013 | Applicable standard for non-domestic storage furniture, specifies stability, durability and load performance requirements for commercial lockers |
US and Canada office-furniture standards
| ANSI/BIFMA X5.9-2019 | Applicable standard for storage furniture, specifies static load, door cycle, stability and safety requirements suitable for commercial workplace lockers |
|---|
Standards applicable to China-market projects
| GB/T 3327-2017 | Applicable standard for metal furniture lockers, specifies dimensional tolerance, structural stability and hardware performance requirements for personnel storage cabinets | |
|---|---|---|
| GB/T 13668-2015 | Applicable standard for steel storage cabinets, specifies sheet metal thickness, weld quality, load capacity and surface finish requirements | |
| GB 18584-2001 | Applicable indoor furniture environmental standard, specifies limit values for harmful substance release applicable to coated or sealed metal furniture components |
This product must meet the following technical requirements: 1. GB/T 3327-2017: Applicable standard for metal furniture lockers, specifies dimensional tolerance, structural stability and hardware performance requirements for personnel storage cabinets; 2. GB/T 13668-2015: Applicable standard for steel storage cabinets, specifies sheet metal thickness, weld quality, load capacity and surface finish requirements; 3. GB 18584-2001: Applicable indoor furniture environmental standard, specifies limit values for harmful substance release applicable to coated or sealed metal furniture components; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export ToolThe 10-Door Stainless Steel Employee Storage Locker (model SS-LKR-10D-1800) is a metal personnel storage unit structured in a standard 2-column, 5-row layout, finished with a smooth brushed stainless steel exterior. Each individual compartment features a dedicated door fitted with a recessed integrated pull handle, an upper recessed label holder for user identification, a lower perforated ventilation grid, and a continuous black magnetic seal trim around the door edge to reduce dust ingress. The unit sits on a rsed welded base plinth that elevates storage compartments above floor level, with clean, sealed welded corners creating a streamlined, professional visual profile suitable for shared public and workspaces. Constructed from 304-grade stainless steel, the locker uses 0.8mm thick folded, reinforced door panels and 0.7mm thick side and back panels for rigid structural integrity. All door hinges are concealed stainless steel pin hinges welded directly to the cabinet frame, supporting a 110-degree outward swing that provides full compartment access without obstructing adjacent sle space. Each door is fitted with a chrome-plated zinc alloy keyed cam lock, supplied with two unique keys per compartment, and built to withstand frequent dly access. The brushed, non-porous surface carries a 2H scratch resistance rating, and the welded, sealed construction prevents unnecessary dust accumulation on seams and joints. Practical functionality is tailored to shared storage needs: each lockable compartment provides a single, undivided storage space rated for a uniform static load suitable for bags, clothing, and personal items, with punched ventilation holes across every door to support passive r circulation and reduce odor buildup from stored items. The unit is designed for free-standing placement on level finished floors without required wall anchoring, with included anchor points for optional seismic securing where needed. The smooth stainless steel surface tolerates regular wiping with standard disinfectants without finish damage, and resists moisture and rust for consistent performance in higher-humidity settings. This locker is well suited for a range of commercial and residential-adjacent public spaces, including factory employee changing rooms, office break rooms and corridor storage zones, gym and pool changing areas, school dormitory and campus recreation spaces, and hospital staff changing areas where regular hygiene cleaning is required. For procurement planning, note the unit ships as a single fully welded, pre-assembled unit to minimize on-site work, with only minor level adjustment, key tagging, and optional anchor installation required before use. Buyers should confirm material grade details via supplier bill of materials prior to final purchase to align with project-specific material requirements, and account for standard loading quantities when planning bulk freight for large-scale fit-outs.
Follow Us