| Submitted | Field | Original | 修改后参数 | Note / Status |
|---|---|---|---|---|
No parameter correction records exist. If you spot inaccurate data, click the flag icon at the end of the corresponding row to submit feedback. | ||||
Automatic mm / inch conversion · Core engineering specifications
| Overall dimensions | 900 x 400 x 1800 mm | |
|---|---|---|
| Single compartment internal dimensions | 280 x 370 x 530 mm | |
| Door leaf dimensions | 270 x 520 mm | |
| Frame material thickness | 0.8 mm | |
| Door panel thickness | 0.7 mm | |
| Vent slot diameter per door | 8 mm | |
| Label holder recess size | 90 x 50 mm | |
| Base plinth height | 50 mm | |
| Internal shelf count per column | 2 | |
| Primary Component Thickness | 40 mm according to load-bearing role | |
| Hardware / Moving-part Clearance | 5 mm operating clearance |
Net weight / load capacity / users / durability
| Product net weight | 48 kg | |
|---|---|---|
| Static load per compartment shelf | 25 kg | |
| Total unit static load capacity | 225 kg | |
| Recommended number of users | 9 | |
| Door hinge cycle rating | 50000 open/close cycles | |
| Lock mechanism cycle rating | 20000 lock/unlock cycles | |
| Powder coat abrasion resistance | 1000 revolutions | |
| Reference Static Load | 150 kg depending on category | |
| Moving-part Durability Reference | Acceptance target 50000 cycles | |
| Recommended Procurement Warranty | Structure 5 years; hardware 3 years |
Core acceptance fields · Panels / hardware / frame / upholstery
| Main cabinet body | Cold-rolled steel sheet, grey epoxy polyester powder coated | |
|---|---|---|
| Door panels | Cold-rolled steel sheet with stamped vent perforations and integrated card slots | |
| Internal dividers | Cold-rolled steel horizontal and vertical partitions, welded to cabinet frame | |
| Lock assemblies | Zinc alloy keyed cam locks with chrome-plated steel lift handles | |
| Hinges | Steel pin hinges welded to cabinet frame and door inner edge, concealed internal mount | |
| Base plinth | Folded cold-rolled steel base, fully welded to lower cabinet frame | |
| Label holders | Transparent PVC card slots recessed into upper door panel | |
| Surface finish | Matte grey powder coating, 80μm coating thickness | |
| Primary Connector Specification | Reference M6-M10 with at least 2 fixing points at major joints | |
| Reference Finish / Color Count | Recommended 6finish options |
Adjustment / rotation / tilt / mobility / storage features
| Compartment configuration | 3 vertical columns, 3 horizontal tiers, total 9 independent locking storage spaces | |
|---|---|---|
| Locking function | Individual keyed cam lock per compartment, two keys supplied per lock | |
| Ventilation function | 12 punched ventilation holes on lower section of each door, promotes air circulation inside compartments to reduce odour buildup | |
| Door operation | Hinged doors open 180 degrees outward to allow full access to compartment contents | |
| Identification function | Recessed card holder mounted at top of every door to display user name or compartment number | |
| Mounting option | Free-standing floor placement, pre-drilled holes on back panel for optional wall anchoring to prevent tipping | |
| Assembly state | Fully welded cabinet frame delivered knocked-down for transport, requires on-site door and lock fitting | |
| Lock handle protrusion from door | 20 mm | |
| Reference Adjustment / Operating Range | 100 mm or 120° where applicable |
Verified carton / gross weight / assembly / loading data
| Number of shipping packages | 1 | |
|---|---|---|
| Shipping carton dimensions | 950 x 450 x 1900 mm | |
| Gross shipping weight | 55 kg | |
| Shipping volume per unit | 0.81 CBM | |
| On-site assembly time | 40 minutes | |
| 20ft container loading quantity | 34 units | |
| 40ft HQ container loading quantity | 84 units | |
| Reference Package Count | 1 set / 2 cartons | |
| Reference Assembly Time | 40 minutes per set | |
| Reference Packaging Volume | 0.8 m³/set |
Recommended spaces / users / usage modes
| Office workspace use | Suitable for open-plan offices and staff areas to store personal items, bags, workwear and accessories for assigned employees | |
|---|---|---|
| Educational facility use | Suitable for schools, colleges and training centres to provide day-use storage for students and teaching staff | |
| Industrial and warehouse use | Suitable for factory changing rooms and warehouse staff areas to store work uniforms, PPE and personal belongings | |
| Public amenity use | Suitable for gyms, leisure centres and public facilities to provide temporary secure storage for visitors and patrons | |
| Configuration recommendation | Recommended to install in banked configurations against walls, anchored to wall surfaces for stability in high-traffic areas |
European market access and chemical requirements
| EN 14073-2:2004 | Applicable office storage furniture standard, specifies safety and strength requirements for lockers used in commercial and public spaces | |
|---|---|---|
| EN 16121:2013 | Applicable non-domestic storage furniture standard, sets requirements for stability, durability and safety for public use storage units |
US and Canada office-furniture standards
Standards applicable to China-market projects
| GB/T 3327-2017 | Applicable standard for metal furniture general technical requirements, sets dimensional tolerance, structural strength and coating performance benchmarks for steel storage cabinets | |
|---|---|---|
| GB 18584-2001 | Applicable indoor decoration material standard, sets limit values for formaldehyde and heavy metal emissions from furniture coatings and metal surfaces | |
| GB/T 13668-2015 | Applicable standard for steel bookcases and storage cabinets, specifies structural stability, load bearing and durability test methods for metal storage units |
This product must meet the following technical requirements: 1. GB/T 3327-2017: Applicable standard for metal furniture general technical requirements, sets dimensional tolerance, structural strength and coating performance benchmarks for steel storage cabinets; 2. GB 18584-2001: Applicable indoor decoration material standard, sets limit values for formaldehyde and heavy metal emissions from furniture coatings and metal surfaces; 3. GB/T 13668-2015: Applicable standard for steel bookcases and storage cabinets, specifies structural stability, load bearing and durability test methods for metal storage units; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export ToolThe 9-Door Vertical Metal Storage Locker (model ML-9D-1800, unbranded) presents a clean, functional grid layout arranged as three vertical columns and three horizontal tiers, finished in a uniform matte grey powder coat that blends unobtrusively into high-traffic environments. A rsed folded steel base plinth elevates all compartments above floor level, and each door features a recessed transparent PVC label holder at its upper edge, a perforated vent array on its lower section, and an integrated chrome-plated lift handle paired with a keyed lock cylinder for a streamlined exterior profile. Constructed primarily from cold-rolled steel, the unit uses frame material for structural support, slightly thinner sheet steel for door panels, and welded internal horizontal and vertical partitions to create nine fully sealed, independent compartments. Steel pin hinges are concealed along internal frame seams for a smooth appearance and lasting performance, while the matte epoxy polyester powder coat finish includes anti-rust pretreatment for indoor use. Transparent PVC label holders and zinc alloy keyed cam locks complete the durable, low-maintenance build. Each compartment operates independently, with a dedicated keyed cam lock supplied with two keys per door to secure personal items. Hinged doors swing open a full 180 degrees outward to grant unobstructed access to internal space, and punched vent holes on every door promote consistent r circulation to reduce trapped odour and moisture buildup. The unit is designed for free-standing floor placement, with pre-drilled holes on the back panel to support optional wall anchoring for added tip prevention. It ships knocked-down in a single carton to reduce freight costs, requiring on-site fitting of doors, locks and leveling with basic hand tools. Each compartment shelf supports a 25 kg static load, for a total unit static capacity of 225 kg across all nine spaces. This locker is well suited for a wide range of spaces, including open-plan office staff areas for employee personal item and workwear storage, schools and training centres for day-use student and staff storage, factory and warehouse changing rooms for PPE and uniform storage, and gyms or leisure centres for temporary patron valuables storage. Modular dimensions allow adjacent placement of multiple units in wall-mounted banks to accommodate larger user counts. When planning procurement, teams should account for required on-site assembly time, note the single-package shipping configuration for preliminary freight quoting, and factor in recommended wall anchoring for high-traffic installations. Each unit supports nine assigned individual users, making it ideal for small to medium teams or facility zones, and the durable hinge and lock mechanisms are rated to withstand frequent, repeated use in public-facing settings.
Follow Us