Member Login|Free Register
Furniture Home· Sell on FurnDim ▾· Member Center ▾· Advanced Search· 中文· Mobile
Sell on FurnDim
＞ Home ＞ Office Desks & Chairs Furniture ＞ Filing Cabinet Series ＞ Sheet Metal Data Cabinet ＞ MLK-8D-2C4T

MLK-8D-2C4T

Code：RZQC6RV1
Request supplier quotes

8-Door Vertical Metal Storage Locker, Dual Column 4-Tier Key Specifications 2026-08-05 17:14

Popularity: 9
Parameter Correction History (Public)
SubmittedFieldOriginal修改后参数Note / Status
No parameter correction records exist. If you spot inaccurate data, click the flag icon at the end of the corresponding row to submit feedback.

MLK-8D-2C4T

1 active supplier(s) >>
CNYUANTONGSupplierYear 1Company Profile
Product supplier8-Door Vertical Metal Storage Locker, Dual Column 4-Tier，sheet metal
Contact the supplier for production scheduling and quotation.
Details >
PRODUCT MODULE 01 / 06

Physical Dimensions

Automatic mm / inch conversion · Core engineering specifications

Overall dimensions900 x 400 x 1800 mm
Single compartment internal dimensions420 x 370 x 410 mm
Door panel thickness0.8 mm
Cabinet body panel thickness0.6 mm
Vent grille perforation diameter6 mm
Recessed handle projection12 mm
Base plinth height50 mm
Card holder slot size90 x 50 mm
Internal shelf thickness0.6 mm
Center vertical partition thickness0.6 mm
Door swing angle180 degrees
Primary Component Thickness40 mm according to load-bearing role
Hardware / Moving-part Clearance5 mm operating clearance
PRODUCT MODULE 02 / 06

Weight, Load & Performance

Net weight / load capacity / users / durability

Net weight per unit45 kg
Per-compartment static load capacity25 kg
User capacity8 individual users
Door open/close cycle durability50000 cycles
Powder coating abrasion resistance2000 cycles
Lock security ratingKeyed to differ, 2 keys per lock
Unit stability floor load100 kg horizontal force without tipping
Reference Static Load150 kg depending on category
Moving-part Durability ReferenceAcceptance target 50000 cycles
Recommended Procurement WarrantyStructure 5 years; hardware 3 years
PRODUCT MODULE 03 / 06

Materials & Structure

Core acceptance fields · Panels / hardware / frame / upholstery

Door panels0.8mm cold-rolled steel sheet, light grey epoxy-polyester powder coated finish
Cabinet frame, sides and back0.6mm cold-rolled steel sheet, matching light grey powder coated finish
Horizontal tier partitions0.6mm cold-rolled steel, welded to internal frame for rigid compartment separation
Vertical center divider0.6mm cold-rolled steel, welded to top and base to separate 2 door columns
Door hinges1.5mm steel pin hinges, zinc plated for corrosion resistance, welded to door and side frame
Cam locksZinc alloy housing, brass lock cylinder, chrome plated finish, fitted with 2 brass keys per compartment
Recessed door handlesZinc alloy pull, chrome plated finish, integrated with lock cylinder
Vent perforationsPunched 6mm round holes in lower section of every door, no additional grille insert
Card holdersRecessed steel slot on upper section of each door, clear plastic label window insert
Base plinth1.0mm folded steel base, welded to cabinet bottom for floor support
Surface finishEpoxy-polyester electrostatic powder coat, 80 micron film thickness, acid washed and phosphated pre-treatment
Primary Connector SpecificationReference M6-M10 with at least 2 fixing points at major joints
PRODUCT MODULE 04 / 06

Functions & Adjustment

Adjustment / rotation / tilt / mobility / storage features

Individual locking compartments8 separate lockable doors, each fitted with independent key cam lock to secure personal belongings for separate users
Door ventilationPunched perforated vents on each door enable continuous air circulation to prevent musty odors from stored clothing or bags
User identificationRecessed card holder slot on each door holds removable name or number labels for easy locker assignment
Flush door designRecessed handles and no external protrusions eliminate snag hazards in high-traffic walkways
Freestanding installationReinforced folded steel base allows placement on level hard floors without wall fixing, optional anti-tip kit available for high-use areas
Full compartment accessHinged doors open 180 degrees to provide unobstructed access to full compartment interior for loading and cleaning
Smooth edge treatmentAll steel panel edges are folded and deburred to eliminate sharp edges for user safety
Stacking compatibilityReinforced top frame supports vertical stacking of identical units for multi-tier bank installations
Lock cylinder diameter18 mm
Reference Adjustment / Operating Range100 mm or 120° where applicable
PRODUCT MODULE 05 / 06

Packaging & Logistics

Verified carton / gross weight / assembly / loading data

Number of shipping packages1
Shipping carton dimensions950 x 450 x 1850 mm
Gross shipping weight50 kg
Shipping volume per unit0.79 CBM
On-site assembly time20 minutes
20ft GP container loading quantity36 units
40ft HQ container loading quantity92 units
Inner packaging material5-layer corrugated carton, expanded polystyrene corner protectors, PE stretch wrap, plastic hardware bag with keys and installation instructions
Reference Package Count1 set / 2 cartons
Reference Assembly Time40 minutes per set
PRODUCT MODULE 06 / 06

Applications & Usage

Recommended spaces / users / usage modes

Office staff changing roomsProvides secure individual storage for personal items, bags and work clothing for office and facility employees
Factory and workshop staff areasDurable steel construction withstands heavy daily use in industrial environments for worker personal storage
School and university dormitory/campus facilities8 individual compartments serve student storage needs with ventilated design suitable for sports gear and books
Gym and fitness center changing areasVentilated doors prevent odor buildup from stored workout clothing and athletic gear
Public service and government facility cloakroomsKeyed individual locks provide secure temporary storage for visitors and staff in public buildings
Modular locker bank configurationsStandard 900mm width allows multiple units to be bolted side by side to create continuous locker rows for high-capacity facilities
STANDARD S1

EU EN Standards

European market access and chemical requirements

EN 14073-2:2004Applicable European standard for office storage furniture safety and structural strength requirements for steel lockers
EN 16121:2013Applicable standard for non-domestic storage furniture durability, stability and strength performance requirements
EN 1023-2:2000Applicable test standard for office furniture storage units stability under vertical and horizontal load
STANDARD S2

North America ANSI/BIFMA Standards

US and Canada office-furniture standards

No standards data is available for this market.
STANDARD S3

China GB Standards

Standards applicable to China-market projects

GB/T 3327-2017Applicable standard for metal storage furniture dimensional tolerance, structural strength and coating performance requirements for steel lockers
GB 18584-2001Applicable indoor furniture hazardous substance emission limit for formaldehyde and heavy metal content from surface coatings
GB/T 4893.8-2013Applicable test standard for furniture surface coating abrasion resistance for powder coated metal surfaces
Standard Tender Description
This product must meet the following technical requirements:
1. GB/T 3327-2017: Applicable standard for metal storage furniture dimensional tolerance, structural strength and coating performance requirements for steel lockers;
2. GB 18584-2001: Applicable indoor furniture hazardous substance emission limit for formaldehyde and heavy metal content from surface coatings;
3. GB/T 4893.8-2013: Applicable test standard for furniture surface coating abrasion resistance for powder coated metal surfaces;
Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
GENERATED EXPORTS

Ready-to-use export tools

Export data is generated from the current published product record.

Technical Report PDF

Directly download an English report in metric or imperial units.

PDF · MLK-8D-2C4T

Complete Parameter Workbook

Download all product information and parameter modules in English.

XLSX · MLK-8D-2C4T

International Listing Template

English title, specifications, materials, standards and purchasing fields.

XLSX · LISTING

Customs Declaration Data

Prepare customs description, material, usage, dimensions and declaration elements.

CUSTOMS · MLK-8D-2C4TOpen Export Tool

Quick Actions

Post Inquiry

Product Overview & Construction Details

The YUANTONG 8-Door Vertical Metal Storage Locker (model MLK-8D-2C4T) is a steel staff storage unit built with a clean, functional dual-column, four-tier layout, finished in a uniform light grey epoxy-polyester powder coat for a cohesive, professional appearance across all exterior and interior panels. Its flush-fit door design integrates recessed chrome-plated zinc alloy handles with no external protrusions, creating a smooth, snag-free profile suitable for busy walkways. Each door features a punched round vent array at the lower section and a recessed card holder slot at the upper section for clear user identification, and the unit sits on a rsed folded steel base plinth that elevates storage compartments off the floor. The cabinet body, horizontal tier partitions, and central vertical divider are fabricated from cold-rolled sheet metal, with heavier-gauge steel used for door panels, and steel pin hinges welded to both door edges and side frames for durable operation. A zinc alloy cam lock with brass cylinder is fitted to each door, supplied with two keys per compartment, and all exposed steel edges are folded and deburred for safety. The unit offers eight independent locking compartments, each sized to hold light personal items such as bags, clothing, books, or athletic gear. Each hinged door opens a full 180 degrees for unobstructed access during loading or routine cleaning, while door perforations enable consistent r circulation to reduce musty odors from stored items. The freestanding unit rests stably on level hard floors, with an optional anti-tip kit available for high-traffic zones, and its reinforced top frame supports vertical stacking of identical units; its standard width also allows side-by-side bolting to create continuous locker banks for higher-capacity installations. This locker is well suited for a wide range of spaces, including office staff changing rooms, factory and workshop employee areas, school and university dormitory or campus facilities, gym and fitness center changing areas, and public service or government facility cloakrooms. For procurement planning, note that the welded cabinet body ships as a single assembled unit with pre-hung doors, requiring only minimal on-site setup for lock inspection, leveling adjustments, and optional anchor fitting. Procurement specifications reference a 5-year warranty for the structure and 3-year warranty for hardware, with a durable powder coat finish and lock and hinge hardware rated for repeated long-term commercial use.

Parameter Correction - MLK-8D-2C4T · RZQC6R

Edit incorrect parameters

Upload evidence (optional)

Up to 5 files, 10 MB each. JPG, PNG, WebP, PDF, Word and Excel are supported.

Error description (required)

Contact (optional)

Comparison list0

About FurnDim

FurnDim connects global furniture buyers with quality manufacturers through structured product parameters, sourcing tools and verified supply information.

Furniture Industry Park, Shunde, Foshan, Guangdong, China
Customer Service：+86 13266570935
displaykss@gmail.com

About Us

Purchasing Guide

Merchant Services

Help Center

Official WeChat

Follow Us

© 2026 FurnDim All Rights Reserved  |  Global Furniture Sourcing & Trading Center ICP Filing
Legal Statement Privacy Policy Sitemap