| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
| Overall dimensions | 1750 x 680 x 800 mm | |
|---|---|---|
| Seat height from floor | 420 mm | |
| Individual seat width | 580 mm | |
| Seat depth per position | 480 mm | |
| Backrest height per seat | 380 mm | |
| Armrest height from seat | 200 mm | |
| Armrest outer diameter (tubing) | 25 mm | |
| Leg spread width (front to rear) | 620 mm | |
| Floor glide diameter | 50 mm | |
| Perforated hole diameter | 5 mm | |
| Underseat ground clearance | 280 mm | |
| Finished Seat Cushion Thickness | 90 mm | |
| Backrest Padding Thickness | 70 mm | |
| Lumbar Support Zone Height | 240 mm | |
| Clear Width Between Armrests | 540 mm |
Net weight / load capacity / users / durability
| Product net weight | 32 kg | |
|---|---|---|
| Static load per seat | 200 kg | |
| Total static load capacity | 600 kg | |
| Recommended user count | 3 people | |
| Frame static yield strength | 1200 kg | |
| Surface corrosion resistance | Grade 304 stainless steel rust resistance for indoor public spaces with routine cleaning | |
| Static load per seat position | 260 kg | |
| Recommended maximum occupant count | 3 people | |
| Frame static yield load | 1500 kg | |
| Seat/back panel impact resistance | 45 kg drop load resistance |
Core acceptance fields · Panels / hardware / frame / upholstery
| Seat panel | 1.2mm thick perforated 304 stainless steel sheet, brushed finish | |
|---|---|---|
| Backrest panel | 1.2mm thick perforated 304 stainless steel sheet, brushed finish | |
| Armrests | 25mm diameter 1.5mm thick stainless steel round tubing, polished welds | |
| Support frame/legs | 2.0mm thick cast/stainless steel Y-shaped leg assembly, brushed finish | |
| Seat dividers/edge trim | 1.5mm thick rolled stainless steel edge bar, welded to seat perimeter | |
| Hardware fasteners | M8 stainless steel hex bolts with locking nuts | |
| Floor glides | Nylon base with stainless steel washer, adjustable leveling stem | |
| Surface finish | No.4 brushed satin stainless steel finish, no applied coating | |
| Seat panels | 1.2 mm thick perforated 304 stainless steel sheet, No.4 brushed satin finish, rolled rounded front edges | |
| Backrest panels | 1.2 mm thick perforated 304 stainless steel sheet, No.4 brushed satin finish, welded to vertical support dividers | |
| End armrests | 25 mm diameter 1.5 mm thick stainless steel round tubing, polished welded joints, bolted to seat frame and leg assembly | |
| Support beam frame | 40 x 20 mm rectangular 1.5 mm thick stainless steel tube, fully welded continuous beam under seats to connect all positions |
Adjustment / rotation / tilt / mobility / storage features
| Seating configuration | Fixed 3-position linked seating with integral upright backrest dividers between seats | |
|---|---|---|
| Armrest support | Two fixed end armrests, no intermediate armrests between seats | |
| Floor installation compatibility | Pre-drilled glide bases for optional permanent floor anchoring, or free-standing placement | |
| Ventilation performance | Uniform perforated seat and back panels allow air circulation to prevent heat buildup during extended waiting | |
| Cleaning access | 280mm underseat clearance allows mop and cleaning equipment access beneath the entire bench | |
| Surface sanitation | Smooth non-porous stainless steel surface supports regular disinfection with common commercial cleaning agents | |
| Leveling adjustment | 10mm vertical adjustment range at each foot glide to accommodate uneven floor surfaces | |
| Backrest recline angle from vertical | 10 degrees | |
| Armrest functionality | Two fixed end armrests, no intermediate armrests between seats, providing stable support for users to stand and clear side entry/exit access | |
| Floor mounting compatibility | Pre-drilled glide bases accept M10 expansion bolts for permanent floor anchoring, or can be used free-standing with non-slip glide pads | |
| Ventilation design | Uniform 5mm perforations across seat and back panels allow continuous air circulation to prevent heat buildup during extended waiting periods | |
| Sanitation compatibility | Smooth non-porous stainless steel surface is compatible with quaternary ammonium, chlorine, and alcohol-based commercial disinfectants with no surface degradation |
Verified carton / gross weight / assembly / loading data
| Number of shipping packages | 1 unit per crate | |
|---|---|---|
| Shipping carton/crate dimensions | 1800 x 730 x 450 mm | |
| Gross shipping weight | 38 kg | |
| Shipping volume per unit | 0.59 CBM | |
| Assembly time per unit | 15 minutes | |
| 20ft GP container loading quantity | 44 units | |
| 40ft HQ container loading quantity | 108 units | |
| Reference Package Count | 1 set / 2 cartons | |
| Reference Assembly Time | 40 minutes per set | |
| Reference Carton Dimensions | 850× 420× 720 mm |
Recommended spaces / users / usage modes
| Hospital clinic waiting areas | Non-porous stainless steel surface withstands frequent disinfection, high foot traffic, and heavy daily use | |
|---|---|---|
| Airport/railway/bus terminal waiting zones | Heavy-duty fixed construction supports high continuous passenger traffic, resists impact and vandalism | |
| Bank/government service hall waiting lines | Fixed linked configuration maintains orderly queuing seating, fixed armrests provide support for elderly or mobility-impaired visitors | |
| Outdoor covered public queuing areas | Stainless steel construction resists moisture and light weather exposure for covered exterior locations | |
| Factory/warehouse employee break areas | Durable metal construction withstands work boot contact and heavy use, cleans easily from industrial dust | |
| School campus public waiting lobbies | Rigid frame resists student use abuse, perforated panels stay cool in warm climates | |
| Hospital and clinic waiting areas | Non-porous stainless steel construction withstands hourly disinfection, high patient and visitor traffic, and heavy daily use; recommended for emergency department, outpatient, and vaccination clinic waiting zones | |
| Airport, railway, and intercity bus terminal waiting zones | Heavy-duty welded construction supports 24/7 continuous passenger traffic, resists impact, luggage abrasion, and vandalism; recommended for gate waiting areas and ticket hall queuing zones |
EU Market Access Requirements* EN Standards
| EN 16139:2013 Furniture - Strength, durability and safety - Non-domestic seating | Defines static load, durability, and stability test requirements for heavy-duty non-residential public seating | |
|---|---|---|
| EN 10088-2 Stainless steels - Technical delivery conditions for sheet/plate and strip | Specifies material grade and finish tolerances for stainless steel sheet used in seating components | |
| EN 10088-2:2014 Stainless steels - Technical delivery conditions for sheet/plate and strip of corrosion resisting steels | Specifies material grade, thickness tolerance, and finish requirements for stainless steel sheet used in seating components; use to verify material grade compliance | |
| EN 1728:2014 Furniture - Seating - Test methods for strength and durability | Specifies standardized test methods for evaluating seat, back, and arm load performance for public seating units |
US and Canada office-furniture standards
| North America procurement and testing reference | ANSI/BIFMA X5.4 Public and Lounge Seating |
|---|
Standards applicable to China-market projects
| GB/T 3324-2017 General technical requirements for metal furniture | Applies to dimensional stability, structural safety, and edge rounding requirements for metal public seating | |
|---|---|---|
| GB/T 24821-2009 Public seating for waiting areas | Defines load capacity, stability, and safety performance requirements for public waiting gang seating | |
| GB 18584-2001 Indoor decorating and refurbishing materials - Limit of harmful substances of wood based furniture | Applies only if units include optional wood components, requiring formaldehyde emission limits for indoor use |
This product must meet the following technical requirements: 1. GB/T 3324-2017 General technical requirements for metal furniture: Applies to dimensional stability, structural safety, and edge rounding requirements for metal public seating; 2. GB/T 24821-2009 Public seating for waiting areas: Defines load capacity, stability, and safety performance requirements for public waiting gang seating; 3. GB 18584-2001 Indoor decorating and refurbishing materials - Limit of harmful substances of wood based furniture: Applies only if units include optional wood components, requiring formaldehyde emission limits for indoor use; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
