| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
| Overall dimensions | 1800 x 680 x 805 mm | |
|---|---|---|
| Single seat position width | 520 mm | |
| Seat height from floor | 420 mm | |
| Seat pan depth per position | 430 mm | |
| Backrest height above seat | 385 mm | |
| Armrest height above floor | 650 mm | |
| End leg splay width | 680 mm | |
| Floor leveler foot diameter | 50 mm | |
| Perforation diameter on seat/back panels | 5 mm | |
| Support beam cross-section | 80 x 40 mm | |
| Finished Seat Cushion Thickness | 90 mm | |
| Backrest Padding Thickness | 70 mm | |
| Lumbar Support Zone Height | 240 mm | |
| Clear Width Between Armrests | 540 mm |
Net weight / load capacity / users / durability
| Net weight per unit | 32 kg | |
|---|---|---|
| Static load per seat position | 300 kg | |
| Total static load capacity for full bench | 900 kg | |
| Surface abrasion resistance | 50000 rub cycles | |
| Leveler foot vertical adjustment range | 15 mm | |
| Recommended daily occupancy cycles | 200 uses | |
| Standard warranty period | 3 years | |
| Seat Foam Density / Rebound Reference | 45 kg/m³ / 65% | |
| Back Foam Density Reference | 38 kg/m³ | |
| Upholstery Thickness / Abrasion Reference | 1.4 mm / 50000 cycles |
Core acceptance fields · Panels / hardware / frame / upholstery
| Seat and back panels | 1.5 mm thick perforated 201 stainless steel, polished finish | |
|---|---|---|
| Structural support beam | 2.0 mm thick cold-rolled steel, black anti-rust powder coating | |
| Outer armrests | 1.5 mm thick polished stainless steel tubular construction | |
| End leg frames | 2.0 mm thick cast/chrome-plated steel, wishbone splayed design | |
| Floor leveler feet | Chrome-plated steel stem with non-slip rubber base pad | |
| Panel edge trim | Rolled polished stainless steel edging, no sharp exposed edges | |
| Seat-to-beam fasteners | Stainless steel hex bolts with anti-loosening lock washers | |
| Seat Internal Support Board Thickness | 14 mm bent plywood or equivalent support board | |
| Backrest Internal Frame Thickness | 14 mm bent plywood/composite reinforced frame | |
| Gas-lift Engineering Specification | Recommended Class 4; outer tube 50 mm; stroke 100 mm | |
| Tilt Mechanism Plate Thickness | 2.5 mm cold-rolled steel | |
| Five-star Base Material Thickness | Metal base wall 3.5 mm; diameter 700 mm |
Adjustment / rotation / tilt / mobility / storage features
| Fixed gang seating layout | Three connected individual seat positions on shared beam, no moving parts | |
|---|---|---|
| Ventilated perforated surfaces | Uniform punched perforations across seat and back for airflow and easy cleaning | |
| Floor leveling adjustment | Threaded adjustable feet at each leg to compensate for uneven floor surfaces | |
| Gangable modular connection | Pre-drilled beam ends allow connecting multiple units into longer seating rows | |
| Wipe-clean hygienic surface | Smooth polished metal finish supports disinfection for healthcare/transit use | |
| Outer armrest support | Curved end armrests provide entry/exit support without dividing seat positions | |
| Backrest recline angle from vertical | 10° | |
| Recline Angle / Lock Reference | 125° with 3suggested lock positions | |
| Tilt Tension User-weight Range | Reference adjustment coverage 120 kg | |
| Height Adjustment Stroke | 100 mm continuous travel | |
| Rotation / Mobility Configuration | 360° swivel with 5-caster multidirectional movement |
Verified carton / gross weight / assembly / loading data
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Carton Dimensions | 850× 420× 720 mm | |
| Reference Packaged Gross Weight | 23 kg/set | |
| Reference Carton Volume | 0.26 m³/set | |
| Indicative 20GP Loading | 135 sets at 85% space utilization | |
| Indicative 40HQ Loading | 320 sets at 85% space utilization |
Recommended spaces / users / usage modes
| Airport terminal waiting areas | Durable, easy-clean construction supports high-volume continuous passenger use | |
|---|---|---|
| Hospital and clinic waiting zones | Smooth perforated metal withstands frequent disinfection and high patient turnover | |
| Bank and government service halls | Stable fixed seating with clean polished finish for public service waiting areas | |
| Railway/bus station waiting platforms | Rigid metal structure resists impact and heavy use in transit environments | |
| Office reception and lobby areas | Sleek polished metal finish complements modern commercial reception interiors | |
| Shopping mall public rest zones | Ventilated perforated surfaces provide comfortable temporary seating for visitors | |
| Recommended Matching Desk Size | 2.4 m executive desk | |
| Reference Daily Use Duration | 8 hours/day; confirm by ergonomic testing |
EU Market Access Requirements* EN Standards
| EN 16139:2013 | Furniture - Strength, durability and safety for non-domestic seating, applicable for public use | |
|---|---|---|
| EN 1022:2018 | Furniture - Seating - Determination of stability, applicable to bench tip-over testing |
US and Canada office-furniture standards
| ANSI/BIFMA X5.1-2017 | General purpose office chairs - Tests for static load, applicable for seat strength | |
|---|---|---|
| ANSI/BIFMA X5.4-2018 | Lounge and public seating - Safety and durability requirements for public areas |
Standards applicable to China-market projects
| GB/T 3324-2017 | General technical requirements for metal furniture, applicable for structural stability testing | |
|---|---|---|
| GB/T 4893.8-2013 | Surface wear resistance test method for furniture surfaces, applicable to metal finish | |
| GB/T 10357.3-2013 | Test method for strength and durability of chairs and stools, applicable to seat static load | |
| GB 18584-2001 | Limit of harmful substances for indoor furniture, applicable for coating emissions |
This product must meet the following technical requirements: 1. GB/T 3324-2017: General technical requirements for metal furniture, applicable for structural stability testing; 2. GB/T 4893.8-2013: Surface wear resistance test method for furniture surfaces, applicable to metal finish; 3. GB/T 10357.3-2013: Test method for strength and durability of chairs and stools, applicable to seat static load; 4. GB 18584-2001: Limit of harmful substances for indoor furniture, applicable for coating emissions; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
