| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
| Overall dimensions | 1800 x 650 x 800 mm | |
|---|---|---|
| Seat height from floor | 450 mm | |
| Single seat width | 600 mm | |
| Seat cushion depth | 600 mm | |
| Seat cushion thickness | 80 mm | |
| Backrest total height above seat | 350 mm | |
| Backrest cutout opening height | 100 mm | |
| Frame leg cross-section | 40 x 40 mm | |
| Floor clearance under seat | 370 mm | |
| Rear middle support leg offset from front edge | 450 mm | |
| Primary Component Thickness | 40 mm according to load-bearing role | |
| Hardware / Moving-part Clearance | 5 mm operating clearance |
Net weight / load capacity / users / durability
| Net weight range | 45 kg | |
|---|---|---|
| Per-seat static load capacity | 150 kg | |
| Seat foam density | 40 kg/m³ | |
| Upholstery abrasion resistance | 50000 Martindale cycles | |
| Recommended maximum user count | 3 adults | |
| Frame static load rating | 600 kg | |
| Surface scratch resistance | 3 H | |
| Reference Static Load | 150 kg depending on category | |
| Moving-part Durability Reference | Acceptance target 50000 cycles | |
| Recommended Procurement Warranty | Structure 5 years; hardware 3 years |
Core acceptance fields · Panels / hardware / frame / upholstery
| Seat upholstery | Yellow polyurethane faux leather | |
|---|---|---|
| Backrest upholstery | Matching yellow polyurethane faux leather | |
| Seat cushion core | High-density polyurethane foam | |
| Backrest core | Rigid plywood or composite board backing | |
| Support frame | Brushed gunmetal grey finished steel | |
| Leg feet | Non-marking black plastic glides | |
| Internal frame joints | Reinforced steel gussets | |
| Upholstery stitching | Tone-on-tone matching thread | |
| Primary Connector Specification | Reference M6-M10 with at least 2 fixing points at major joints | |
| Reference Finish / Color Count | Recommended 6 finish options |
Adjustment / rotation / tilt / mobility / storage features
| Seating configuration | Fixed 3-position individual segmented seats | |
|---|---|---|
| Back support design | Geometric open cutout lumbar support | |
| Structural stability | 6-point leg support system | |
| Floor protection | Fixed non-marking glides on all legs | |
| Cleaning access | Open floor clearance under seat | |
| Modular alignment | Straight rectangular profile | |
| Fixed position design | Non-reclining, non-adjustable fixed structure | |
| Reference Adjustment / Operating Range | 100 mm or 120° where applicable |
Verified carton / gross weight / assembly / loading data
| Packaged carton count | 1 unit | |
|---|---|---|
| Packaged carton dimensions | 1850 x 700 x 480 mm | |
| Packaged gross weight | 55 kg | |
| Packaged volume per unit | 0.63 CBM | |
| Assembly time on site | 20 minutes | |
| 20ft GP container loading quantity | 42 units | |
| 40ft HQ container loading quantity | 98 units | |
| Reference Package Count | 1 set / 2 cartons | |
| Reference Assembly Time | 40 minutes per set | |
| Reference Packaging Volume | 0.8 m³/set |
Recommended spaces / users / usage modes
| Office reception and waiting areas | Suitable for corporate lobbies, meeting room anterooms, and visitor waiting zones, durable contract grade construction withstands daily high visitor traffic | |
|---|---|---|
| Healthcare clinic waiting spaces | Smooth non-porous upholstery allows easy disinfection between patients, fixed construction requires minimal maintenance in high-turnover medical environments | |
| Public transport waiting terminals | Robust metal frame and high-abrasion upholstery resists heavy use in bus, train, or airport queuing and waiting areas | |
| Educational facility common areas | Appropriate for school hallways, student lounge zones, and administrative waiting areas, easy to clean and resistant to student use wear | |
| Retail customer waiting zones | Bright yellow finish provides high-visibility modern aesthetic for bank, retail store, and service centre customer waiting lines | |
| Breakout collaboration spaces | Can be used in informal office breakout zones for short team discussions and casual employee seating, open design supports easy reconfiguration |
EU Market Access Requirements* EN Standards
| EN 16139:2013 | Furniture - Strength, durability and safety for non-domestic seating, applicable for public waiting area structural load and stability testing | |
|---|---|---|
| EN 1022:2018 | Furniture - Seating - Determination of stability, applicable to verify bench does not tip under normal use loads |
US and Canada office-furniture standards
| North America procurement and testing reference | ANSI/BIFMA X5.4 Public and Lounge Seating |
|---|
Standards applicable to China-market projects
| GB/T 3324-2017 | General technical requirements for wooden furniture, applicable to rigid back panel structural and dimensional verification | |
|---|---|---|
| GB/T 3325-2017 | General technical requirements for metal furniture, applicable to steel frame strength, welding quality, and finish durability verification | |
| GB 28007-2011 | Safety requirements for children's furniture, applicable only if specified for paediatric waiting areas, covers edge rounding and harmful substance limits | |
| GB/T 16799-2008 | Polyurethane synthetic leather for furniture, applicable to upholstery material performance and harmful substance content verification |
This product must meet the following technical requirements: 1. GB/T 3324-2017: General technical requirements for wooden furniture, applicable to rigid back panel structural and dimensional verification; 2. GB/T 3325-2017: General technical requirements for metal furniture, applicable to steel frame strength, welding quality, and finish durability verification; 3. GB 28007-2011: Safety requirements for children's furniture, applicable only if specified for paediatric waiting areas, covers edge rounding and harmful substance limits; 4. GB/T 16799-2008: Polyurethane synthetic leather for furniture, applicable to upholstery material performance and harmful substance content verification; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
