| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
| Overall dimensions | 1780 x 680 x 800 mm | |
|---|---|---|
| Seat height from floor | 430 mm | |
| Single seat width | 560 mm | |
| Seat depth | 480 mm | |
| Backrest height above seat | 410 mm | |
| Backrest slat width | 50 mm | |
| Backrest slat gap | 20 mm | |
| Armrest height above seat | 200 mm | |
| Leg spread width (front to back) | 600 mm | |
| Adjustable foot glide diameter | 50 mm | |
| Central support beam cross-section | 80 x 40 mm | |
| Seat surface anti-slip groove depth | 1 mm | |
| Under-seat ground clearance | 320 mm | |
| Seat divider height | 30 mm | |
| Finished Seat Cushion Thickness | 90 mm | |
| Backrest Padding Thickness | 70 mm |
Net weight / load capacity / users / durability
| Net product weight | 28 kg | |
|---|---|---|
| Per-seat static load capacity | 150 kg | |
| Recommended occupancy | 3 adults | |
| Seat surface static friction coefficient | 0.5 | |
| Finish abrasion resistance | 5000 cycles | |
| Structural weld tensile strength | 300 MPa | |
| Backrest horizontal deflection under 75kg load | 30 mm | |
| Impact resistance per seat | 1000 cycles of 25kg sandbag drop from 200mm height | |
| Seat Foam Density / Rebound Reference | 45 kg/m³ / 65% | |
| Back Foam Density Reference | 38 kg/m³ |
Core acceptance fields · Panels / hardware / frame / upholstery
| Seat panel construction | 2.5 mm thick stamped aluminum alloy with textured anti-slip surface finish | |
|---|---|---|
| Backrest construction | 2.0 mm thick horizontal aluminum slats with open gaps between slats | |
| Central support beam | 2.5 mm thick rectangular steel tube with matte dark gray powder coat finish | |
| Armrests | Cast aluminum alloy with polished/satin silver finish, open curved loop design | |
| Leg assemblies | Cast aluminum alloy splayed tripod style legs, matte silver finish | |
| Floor glides | Chrome-plated steel adjustable glides with rubber contact pads | |
| End cap details | Black injection-molded plastic decorative/protective caps at armrest-to-leg junctions | |
| Surface finish | Weather-resistant polyester powder coating on all metal components | |
| Joint accent caps | Black injection-molded polypropylene decorative/protective caps at armrest-to-leg junctions | |
| Seat-back divider strips | 2 mm thick brushed aluminum integrated dividers between adjacent seating positions | |
| Mounting hardware | Grade 8.8 zinc-plated steel bolts with lock washers | |
| Seat Internal Support Board Thickness | 14 mm bent plywood or equivalent support board |
Adjustment / rotation / tilt / mobility / storage features
| Seating separation | Fixed molded contours between seats define 3 individual seating positions | |
|---|---|---|
| Ventilation design | Open slatted backrest construction allows constant air circulation | |
| Level adjustment | Rotating adjustable feet compensate for up to 10 mm of floor unevenness | |
| Floor protection | Rubber-tipped glides prevent scratching or scuffing on hard tile, wood, or terrazzo flooring | |
| Stand-up assistance | Rigid curved armrests provide stable hand support for users when rising from a seated position | |
| Fixed installation option | Pre-drilled holes in leg feet allow permanent anchoring to concrete or tile floors for high-traffic security | |
| Maintenance access | Smooth, non-porous metal surfaces allow wipedown cleaning and disinfection between users | |
| Cleaning clearance | 320mm under-seat ground clearance allows access for mechanical floor sweepers and mop cleaning | |
| Luggage placement | Flat front seat edges and open under-seat space allow temporary placement of carry-on luggage and personal bags | |
| Recline Angle / Lock Reference | 125° with 3 suggested lock positions | |
| Tilt Tension User-weight Range | Reference adjustment coverage 120 kg | |
| Height Adjustment Stroke | 100 mm continuous travel |
Verified carton / gross weight / assembly / loading data
| Number of shipping cartons | 1 carton | |
|---|---|---|
| Shipping carton dimensions | 1830 x 730 x 280 mm | |
| Gross shipping weight | 32 kg | |
| Shipping volume (CBM) | 0.37 CBM | |
| Assembly time | 25 minutes | |
| 20ft GP container loading quantity | 72 units | |
| 40ft HC container loading quantity | 178 units | |
| Included hardware | M8 mounting bolts, hex wrench, 6 adjustable glides | |
| Reference Package Count | 1 set / 2 cartons | |
| Reference Assembly Time | 40 minutes per set |
Recommended spaces / users / usage modes
| Healthcare waiting areas | Suitable for hospital clinics, emergency departments and outpatient lobbies | |
|---|---|---|
| Public transit hubs | Recommended for bus terminals, train stations, and airport gate waiting zones | |
| Government service halls | Applicable for tax offices, licensing centers, and public service counters | |
| Commercial office reception | Suitable for building lobbies and corporate visitor waiting areas | |
| Semi-outdoor covered walkways | Applicable for covered station platforms, bus shelters, and building entryways | |
| Education facilities | Recommended for school administration offices, campus health centers, and library waiting zones | |
| Recommended Matching Desk Size | 2.4 m executive desk | |
| Reference Daily Use Duration | 8 hours/day; confirm by ergonomic testing |
EU Market Access Requirements* EN Standards
| EN 16139:2013 | Furniture: Strength, durability and safety requirements for non-domestic seating, applicable for public waiting area use acceptance | |
|---|---|---|
| EN 1728:2012 | Furniture: Seating, test methods for strength and durability, recommended for pre-procurement sample testing of structural performance | |
| EN 1022:2018 | Furniture: Seating, determination of stability, applicable to verify bench does not tip when users lean on armrests or back edges |
US and Canada office-furniture standards
| North America procurement and testing reference | ANSI/BIFMA X5.4 Public and Lounge Seating |
|---|
Standards applicable to China-market projects
| GB/T 3324-2017 | General technical requirements for metal furniture, applicable for dimensional tolerance, structural stability, and finish quality acceptance | |
|---|---|---|
| GB/T 10357.2-2013 | Furniture mechanical performance test for chairs and stools: static load testing, recommended as acceptance criteria for seat and back load rating | |
| GB/T 10357.3-2013 | Furniture mechanical performance test for chairs and stools: impact resistance, applicable for seat and back durability validation | |
| GB 18584-2001 | Indoor decoration materials: limit of harmful substances in wooden furniture, applicable if any plastic/coating components are used, to confirm heavy metal content limits | |
| GB/T 10357.7-2013 | Furniture mechanical performance test for tables and seating: stability testing, applicable to verify bench does not tip when users lean on armrests or back edges |
This product must meet the following technical requirements: 1. GB/T 3324-2017: General technical requirements for metal furniture, applicable for dimensional tolerance, structural stability, and finish quality acceptance; 2. GB/T 10357.2-2013: Furniture mechanical performance test for chairs and stools: static load testing, recommended as acceptance criteria for seat and back load rating; 3. GB/T 10357.3-2013: Furniture mechanical performance test for chairs and stools: impact resistance, applicable for seat and back durability validation; 4. GB 18584-2001: Indoor decoration materials: limit of harmful substances in wooden furniture, applicable if any plastic/coating components are used, to confirm heavy metal content limits; 5. GB/T 10357.7-2013: Furniture mechanical performance test for tables and seating: stability testing, applicable to verify bench does not tip when users lean on armrests or back edges; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
