| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
| Overall dimensions (W x D x H) | 1800 x 680 x 800 mm | |
|---|---|---|
| Individual seat width per position | 520 mm | |
| Seat depth per position | 450 mm | |
| Seat height from floor to seat surface | 430 mm | |
| Backrest height per position | 400 mm | |
| Backrest incline angle from vertical | 10 degrees | |
| Armrest height from seat surface | 200 mm | |
| Leg spread width (support base) | 650 mm | |
| Floor clearance under seat beam | 280 mm | |
| Seat divider width between positions | 30 mm | |
| Adjustable foot pad diameter | 50 mm | |
| Finished Seat Cushion Thickness | 90 mm | |
| Backrest Padding Thickness | 70 mm | |
| Lumbar Support Zone Height | 240 mm | |
| Clear Width Between Armrests | 540 mm |
Net weight / load capacity / users / durability
| Total unit net weight | 28 kg | |
|---|---|---|
| Static load capacity per seat | 150 kg | |
| Recommended maximum occupancy | 3 adults | |
| Surface impact resistance | 10 kg drop from 1m height | |
| Surface cleanability rating | Compatible with 75% alcohol and standard hospital-grade disinfectants | |
| Frame corrosion resistance | 48 hour neutral salt spray resistance | |
| Service life under daily commercial use | 5 years | |
| Surface disinfection compatibility | Suitable for use with 75% alcohol and standard hospital-grade disinfectants | |
| Seat Foam Density / Rebound Reference | 45 kg/m³ / 65% | |
| Back Foam Density Reference | 38 kg/m³ |
Core acceptance fields · Panels / hardware / frame / upholstery
| Seat support beam | 2.0mm thick cold-rolled steel tube, chromed polished finish | |
|---|---|---|
| Leg support frames | Cast aluminum alloy, powder-coated silver finish | |
| Seat pads | 30mm thick rigid polyurethane (PU) self-skinning foam, green color, rounded edges | |
| Backrest pads | 20mm thick rigid polyurethane self-skinning foam, green color, fixed to metal back plates | |
| Armrests | 1.5mm thick polished stainless steel bent tube, open triangular shape | |
| Seat and back dividers | 1.2mm thick chromed steel stamping, rounded edge finishing | |
| Adjustable feet | Nylon base with galvanized steel threaded stud, non-slip rubber bottom pad | |
| Fasteners and hardware | 304 grade stainless steel bolts and connectors, anti-loosening design | |
| Seat Internal Support Board Thickness | 14 mm bent plywood or equivalent support board | |
| Backrest Internal Frame Thickness | 14 mm bent plywood/composite reinforced frame | |
| Gas-lift Engineering Specification | Recommended Class 4; outer tube 50 mm; stroke 100 mm | |
| Tilt Mechanism Plate Thickness | 2.5 mm cold-rolled steel |
Adjustment / rotation / tilt / mobility / storage features
| Seating configuration | 3 individual separated seating positions with integral metal dividers | |
|---|---|---|
| Sanitization support | Non-porous seamless PU seat and back surfaces with no fabric gaps | |
| Floor leveling | Threaded adjustable feet at 4 leg ends, 15mm vertical adjustment range | |
| Fixed position design | No recline, swivel, or adjustment mechanisms on seats, backs, or armrests | |
| Floor protection | Rubber contact pads on all feet prevent scratches to hard flooring | |
| Cleaning access | 280mm floor clearance under the seat beam allows access for standard mop and floor cleaning equipment | |
| Linking capability | Pre-drilled connection points on end leg frames allow multiple 3-seat units to be bolted together in continuous rows | |
| Edge safety design | All exposed metal edges and PU pad corners are rounded with 10mm minimum radius | |
| Vandal-resistant fixed design | No recline, swivel, height adjustment, or moving mechanisms on seats, backs, or armrests | |
| Row linking capability | Pre-drilled connection points on end leg frames allow multiple 3-seat units to be bolted together in continuous rows | |
| Recline Angle / Lock Reference | 125° with 3suggested lock positions | |
| Tilt Tension User-weight Range | Reference adjustment coverage 120 kg |
Verified carton / gross weight / assembly / loading data
| Number of shipping packages | 1 | |
|---|---|---|
| Shipping carton dimensions (L x W x H) | 1850 x 700 x 450 mm | |
| Gross shipping weight per unit | 32 kg | |
| Shipping volume per unit (CBM) | 0.58 | |
| On-site assembly time per unit | 20 minutes | |
| 20ft GP container loading quantity | 50 units | |
| 40ft HQ container loading quantity | 125 units | |
| Standard packaging materials | 5-layer corrugated carton, EPS foam corner protection, PE film wrapping for metal parts, hardware kit with assembly guide | |
| Reference Package Count | 1 set / 2 cartons | |
| Reference Assembly Time | 40 minutes per set |
Recommended spaces / users / usage modes
| Hospital outpatient waiting areas | Disinfectable non-porous surfaces and separated seats meet clinical hygiene requirements for high-turnover patient waiting zones | |
|---|---|---|
| Clinic and medical facility reception areas | Durable, easy-to-clean construction supports frequent sanitization and continuous daily use without wear | |
| Airport, railway, and bus terminal waiting zones | Heavy-duty metal frame and high static load capacity accommodate continuous public use with minimal maintenance | |
| Bank, government service hall, and public office waiting areas | Neutral green color and robust design suit formal public service environments, providing clear defined seating for visitors | |
| School and university administrative waiting areas | Vandal-resistant fixed construction reduces maintenance needs, suitable for high-traffic student and visitor use | |
| Temporary public event and vaccination site seating | Quick assembly and modular linking capability allow flexible layout for temporary high-capacity waiting setups | |
| Recommended Matching Desk Size | 2.4 m executive desk | |
| Reference Daily Use Duration | 8 hours/day; confirm by ergonomic testing |
EU Market Access Requirements* EN Standards
| EN 16139:2013 Furniture - Strength, durability and stability - Non-domestic seating | European standard for non-domestic public seating performance, suitable for international project specification and acceptance | |
|---|---|---|
| EN 13722:2004 Furniture - Seating - Test methods for the determination of stability | Specifies stability test methods to prevent tipping of multi-seat bench units under normal use | |
| EN 1022:2018 Furniture - Seating - Determination of stability | Covers general seating stability requirements applicable to fixed public waiting benches |
US and Canada office-furniture standards
| North America procurement and testing reference | ANSI/BIFMA X5.4 Public and Lounge Seating |
|---|
Standards applicable to China-market projects
| GB/T 3324-2017 General technical requirements for wooden furniture: Metal furniture seating mechanical performance | Applies to static load, impact, and stability testing for fixed public seating, recommended for final product acceptance | |
|---|---|---|
| GB 18584-2001 Indoor decorating and refurbishing materials - Limit of harmful substances of wood based furniture | Applies to harmful substance emission limits for any composite or foam components, recommended for indoor air quality compliance | |
| GB/T 10357.3-2013 Test of mechanical properties of furniture - Strength and durability of chairs and stools | Specifies seat and back static load, fatigue, and impact test methods for commercial seating products |
This product must meet the following technical requirements: 1. GB/T 3324-2017 General technical requirements for wooden furniture: Metal furniture seating mechanical performance: Applies to static load, impact, and stability testing for fixed public seating, recommended for final product acceptance; 2. GB 18584-2001 Indoor decorating and refurbishing materials - Limit of harmful substances of wood based furniture: Applies to harmful substance emission limits for any composite or foam components, recommended for indoor air quality compliance; 3. GB/T 10357.3-2013 Test of mechanical properties of furniture - Strength and durability of chairs and stools: Specifies seat and back static load, fatigue, and impact test methods for commercial seating products; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
