| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
| Overall dimensions | 1780 x 680 x 800 mm | |
|---|---|---|
| Seat height from floor | 430 mm | |
| Single seat width | 580 mm | |
| Seat depth | 480 mm | |
| Backrest height above seat | 370 mm | |
| Armrest height above seat | 180 mm | |
| Floor contact footprint width | 1650 mm | |
| Divider panel width between seats | 25 mm | |
| Floor glide diameter | 50 mm | |
| Leg tube diameter | 38 mm | |
| Finished Seat Cushion Thickness | 90 mm | |
| Backrest Padding Thickness | 70 mm | |
| Lumbar Support Zone Height | 240 mm | |
| Clear Width Between Armrests | 540 mm |
Net weight / load capacity / users / durability
| Product net weight | 24 kg | |
|---|---|---|
| Per-seat static load capacity | 150 kg | |
| Recommended occupancy | 3 adults | |
| Upholstery abrasion resistance | 50000 cycles | |
| Frame static load test load per seat | 200 kg | |
| Warranty period for structural frame | 5 years | |
| Warranty period for upholstery pads | 2 years | |
| Frame static load test per seat | 220 kg | |
| Seat cyclic fatigue test life | 100000 cycles | |
| Seat Foam Density / Rebound Reference | 45 kg/m³ / 65% |
Core acceptance fields · Panels / hardware / frame / upholstery
| Structural beam frame | 1.8mm thick cold-rolled steel, chrome-plated finish | |
|---|---|---|
| Seat pad core | 12mm thick molded plywood with 30mm high-density polyurethane foam | |
| Back pad core | 12mm thick molded plywood with 20mm high-density polyurethane foam | |
| Seat/back upholstery | 1.2mm thick blue polyurethane (PU) leather, matte finish | |
| Armrests | 2.0mm thick chrome-plated steel, curved loop design | |
| Support legs | 38mm diameter chrome-plated steel tube, angled triangular bracing | |
| Floor glides | Zinc-plated steel with rubber anti-slip pad, adjustable height | |
| Seat dividers | 1.5mm thick brushed steel vertical panels | |
| Mounting hardware | Zinc-plated steel bolts and cross-braces | |
| Surface treatment for steel parts | Electrostatic chrome plating with anti-rust primer | |
| Main structural beam | 2.0mm thick cold-rolled steel, polished chrome-plated finish | |
| Seat support substrate | 12mm thick molded plywood, rigid curved profile |
Adjustment / rotation / tilt / mobility / storage features
| Seat configuration | 3 separated individual seats with full vertical dividers | |
|---|---|---|
| Floor mounting | Fixed installation via adjustable floor glides | |
| Cleaning access | Smooth gap-free panel surfaces with no fabric crevices | |
| Armrest support | Dual outer armrests with curved ergonomic profile | |
| Structural bracing | Triangular leg-to-beam connection design | |
| Upholstery attachment | Hidden fastener mounting for seat and back pads | |
| Height adjustment for leveling | 10mm adjustment range on each floor glide | |
| Stacking during transport | Disassembled flat-pack design for reduced shipping volume | |
| Cleaning performance | Gap-free smooth PU surfaces with 8mm stitched seam pitch | |
| Standing assistance | Dual outer curved armrests with 200mm above-seat height | |
| Structural stability | Triangular leg-to-beam welded bracing design | |
| Pad replacement design | Hidden anti-tamper fasteners for seat and back pads |
Verified carton / gross weight / assembly / loading data
| Shipping carton dimensions | 1820 x 720 x 220 mm | |
|---|---|---|
| Gross shipping weight | 28 kg | |
| Assembly time per unit | 30 minutes | |
| 20ft GP container loading quantity | 96 units | |
| 40ft HQ container loading quantity | 240 units | |
| Reference Package Count | 1 set / 2 cartons | |
| Reference Assembly Time | 40 minutes per set | |
| Reference Carton Dimensions | 850× 420× 720 mm | |
| Reference Packaged Gross Weight | 23 kg/set | |
| Reference Carton Volume | 0.26 m³/set |
Recommended spaces / users / usage modes
| Hospital and clinic waiting areas | Wipe-clean PU surface and durable steel frame supports constant high-volume use and easy disinfection between patients | |
|---|---|---|
| Office reception and lobby zones | Neutral blue upholstery and chrome finish complements professional commercial interiors while providing stable guest seating | |
| Transit hubs (bus/train stations, airport terminals) | Fixed floor-mount design and high load rating withstand heavy daily public use without shifting or damage | |
| Bank and government service halls | Divided seats maintain orderly queuing and personal space for visitors waiting for service | |
| School and university public areas | Sturdy construction resists impact and heavy use in high-traffic student common spaces | |
| Optional outdoor covered use | Chrome-plated rust-resistant frame allows installation in sheltered outdoor waiting zones with protection from direct rain | |
| School and university public lobbies | Impact-resistant steel frame and abrasion-resistant upholstery resists rough use in high-traffic student common spaces | |
| Covered outdoor waiting areas | Chrome-plated rust-resistant frame supports installation in sheltered outdoor walkways or building entrances with protection from direct precipitation |
EU Market Access Requirements* EN Standards
| EN 16139:2013 | Furniture - Strength, durability and safety for non-domestic seating, applies to public waiting area load and stability requirements | |
|---|---|---|
| EN 13722:2004 | Furniture - Test methods for seating stability, applies to anti-tip verification for fixed beam seating units |
US and Canada office-furniture standards
| ANSI/BIFMA X5.18-2016 | Public and lobby seating standard, applies to static load, cyclic durability, and leg strength requirements for commercial waiting areas |
|---|
Standards applicable to China-market projects
| GB/T 3324-2017 | General technical requirements for metal furniture, applies to structural strength, coating adhesion, and dimensional tolerances of the steel frame | |
|---|---|---|
| GB 28007-2011 | Safety and performance requirements for public seating, applies to static load, stability, and edge safety for high-traffic installations | |
| GB/T 17657-2013 | Test method for surface wear resistance and adhesion of decorative surfaces on furniture, applies to PU upholstery and plated metal finishes | |
| GB/T 19001-2016 | Quality management system requirements for production consistency of commercial furniture |
This product must meet the following technical requirements: 1. GB/T 3324-2017: General technical requirements for metal furniture, applies to structural strength, coating adhesion, and dimensional tolerances of the steel frame; 2. GB 28007-2011: Safety and performance requirements for public seating, applies to static load, stability, and edge safety for high-traffic installations; 3. GB/T 17657-2013: Test method for surface wear resistance and adhesion of decorative surfaces on furniture, applies to PU upholstery and plated metal finishes; 4. GB/T 19001-2016: Quality management system requirements for production consistency of commercial furniture; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
