| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
| Overall dimensions | 1800 x 680 x 450 mm | |
|---|---|---|
| Primary Component Thickness | 40 mm according to load-bearing role | |
| Hardware / Moving-part Clearance | 5 mm operating clearance |
Net weight / load capacity / users / durability
| Total static load capacity | 450 kg | |
|---|---|---|
| Product net weight | 30 kg | |
| Recommended user count | 3 adults | |
| Surface sanitization compatibility | Daily chemical disinfection suitable | |
| Finish corrosion resistance | 1000 hours salt spray resistance reference | |
| Structural weld shear strength | 200 MPa minimum | |
| Commercial warranty period | 3 years | |
| Reference Static Load | 150 kg depending on category | |
| Moving-part Durability Reference | Acceptance target 50000 cycles | |
| Recommended Procurement Warranty | Structure 5 years; hardware 3 years |
Core acceptance fields · Panels / hardware / frame / upholstery
| Seat panels | 1.8mm perforated cold-rolled steel with chrome-plated trim edges | |
|---|---|---|
| Leg assemblies | 1.5mm cold-rolled steel with polished chrome plating, splayed arched design | |
| Under-seat support beam | 2.0mm thick rectangular steel tube with black electrostatic powder coating | |
| Seat dividers | Chrome-plated steel dividers with black rubber accent buffers | |
| Floor glides | Nylon-base adjustable threaded glides with non-slip rubber pads | |
| Seat edge trim | 2.0mm chrome-plated steel edge binding with rounded safety edges | |
| Fasteners | Stainless steel hex bolts and lock washers for beam-to-leg connections | |
| Surface finish on steel components | Triple-layer chrome plating on exposed metal parts, black powder coat on structural beam | |
| Primary Connector Specification | Reference M6-M10 with at least 2 fixing points at major joints | |
| Reference Finish / Color Count | Recommended 6finish options |
Adjustment / rotation / tilt / mobility / storage features
| Floor leveling adjustment | 15mm vertical adjustment via threaded nylon glides at each leg foot | |
|---|---|---|
| Fixed position seating | Non-reclining, non-swiveling fixed beam-mounted seat configuration | |
| Ventilated seating surface | Perforated mesh seat design enables continuous airflow for user comfort | |
| Knock-down modular assembly | Seat sections, support beam and leg assemblies ship disassembled for flat packing | |
| Optional accessory compatibility | Pre-drilled mounting points for add-on armrests or PU seat cushions | |
| Anti-slip floor contact | Rubber-tipped glides prevent floor scratching and unwanted bench movement | |
| Position demarcation | Raised metal dividers between seats prevent cross-seat encroachment | |
| Drainage and debris clearance | Perforated seat openings allow liquid and small debris to fall through for easy cleaning | |
| Reference Adjustment / Operating Range | 100 mm or 120° where applicable |
Verified carton / gross weight / assembly / loading data
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Packaging Volume | 0.8 m³/set | |
| Reference Packaged Gross Weight | 120 kg/set |
Recommended spaces / users / usage modes
| Hospital clinic waiting areas | Easy to sanitize non-porous metal surfaces meet high-hygiene public space requirements | |
|---|---|---|
| Airport, train and bus station terminals | High load capacity and durable construction withstand continuous high-volume use | |
| Bank and government service halls | Fixed segmented seating provides organized queuing and clear seating positions | |
| School hallway and reception areas | Low-profile backless design does not obstruct sightlines in public circulation zones | |
| Outdoor covered public waiting zones | Corrosion-resistant metal finishes resist humidity and incidental weather exposure | |
| Industrial break room seating | Ventilated perforated seats are suitable for short-term rest breaks in work environments | |
| Public service center waiting zones | Scratch and impact resistant surfaces hold up to heavy daily public use |
EU Market Access Requirements* EN Standards
| EN 16139:2013 | Applicable to non-domestic seating strength, stability and durability requirements for public use | |
|---|---|---|
| EN 13722:2004 | Applicable to metal furniture surface finish adhesion and corrosion resistance requirements | |
| EN 1728:2012 | Applicable to seating test methods for static load and fatigue performance validation |
US and Canada office-furniture standards
| ANSI/BIFMA X5.4-2021 | Applicable to lounge and public seating performance and safety requirements for commercial use | |
|---|---|---|
| ANSI/BIFMA X5.1-2017 | Applicable to general office seating static load and structural stability test criteria |
Standards applicable to China-market projects
| GB/T 3324-2017 | Applicable to general technical requirements for metal furniture strength, stability and dimensional tolerances | |
|---|---|---|
| GB 18584-2001 | Applicable to limit of harmful substances in wooden and metal furniture interior decoration materials | |
| GB/T 10357.3-2013 | Applicable to furniture mechanical performance test methods for seating strength and durability |
This product must meet the following technical requirements: 1. GB/T 3324-2017: Applicable to general technical requirements for metal furniture strength, stability and dimensional tolerances; 2. GB 18584-2001: Applicable to limit of harmful substances in wooden and metal furniture interior decoration materials; 3. GB/T 10357.3-2013: Applicable to furniture mechanical performance test methods for seating strength and durability; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
