| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
| Overall dimensions | 1800 x 780 x 890 mm | |
|---|---|---|
| Individual seat width | 580 mm | |
| Seat depth | 480 mm | |
| Seat height above floor | 420 mm | |
| Backrest vertical height | 480 mm | |
| End armrest height above seat | 320 mm | |
| Support beam cross-section | 80 x 90 mm | |
| Leg floor contact spread | 660 mm | |
| Polyurethane panel thickness | 30 mm | |
| Floor glide diameter | 40 mm | |
| Primary Component Thickness | 40 mm according to load-bearing role | |
| Hardware / Moving-part Clearance | 5 mm operating clearance |
Net weight / load capacity / users / durability
| Static load capacity per seat | 150 kg | |
|---|---|---|
| Total unit net weight | 45 kg | |
| Seat impact durability rating | 10000 cycles | |
| Coating adhesion grade | Grade 1 | |
| Floor contact flatness tolerance | 1.0 mm | |
| Reference Static Load | 150 kg depending on category | |
| Moving-part Durability Reference | Acceptance target 50000 cycles | |
| Recommended Procurement Warranty | Structure 5 years; hardware 3 years |
Core acceptance fields · Panels / hardware / frame / upholstery
| Seat and back panels | 30mm thick rigid self-skinning molded polyurethane | |
|---|---|---|
| Internal seat core frame | 1.2mm thick steel flat tube with 1.0mm steel plate reinforcement | |
| End armrest assemblies | Die-cast aluminum with matte silver polyester powder coating | |
| Tripod support legs | Die-cast aluminum with electrostatic powder coated finish | |
| Horizontal support beam | 80x90mm octagonal steel tube with 2.0mm wall thickness | |
| Seat mounting brackets | 5mm thick stamped steel brackets with anti-corrosion coating | |
| Floor contact glides | 40mm diameter non-marking black rubber with adjustable threaded stem | |
| Metal surface finish | Matte textured powder coating with acid pickled anti-rust pretreatment | |
| Primary Connector Specification | Reference M6-M10 with at least 2 fixing points at major joints | |
| Reference Finish / Color Count | Recommended 6finish options |
Adjustment / rotation / tilt / mobility / storage features
| Seating configuration | 3 individual contoured seats on a shared fixed beam | |
|---|---|---|
| Installation type | Fixed floor-stable placement with adjustable leveling glides | |
| Surface maintenance | Seamless non-porous PU surface supports wipe-down disinfection | |
| Structural design | No moving parts, recline, swivel or folding mechanisms | |
| Armrest support | Curved end armrests provide support for outermost seated users | |
| Noise reduction | Rubber floor glides eliminate metal-to-floor contact noise | |
| Reference Adjustment / Operating Range | 100 mm or 120° where applicable |
Verified carton / gross weight / assembly / loading data
| Packaged carton dimensions | 1850 x 720 x 280 mm | |
|---|---|---|
| Packaged gross weight | 50 kg | |
| Reference Package Count | 1 set / 2 cartons | |
| Reference Assembly Time | 40 minutes per set | |
| Reference Packaging Volume | 0.8 m³/set | |
| Reference Packaged Gross Weight | 120 kg/set |
Recommended spaces / users / usage modes
| Hospital outpatient waiting areas | Easy-clean disinfectable surface withstands high daily patient turnover | |
|---|---|---|
| Airport and railway station waiting zones | Durable rigid construction supports continuous heavy public use | |
| Bank and government service lobbies | Neutral teal finish complements formal public service interiors | |
| Clinic and vaccination center waiting spaces | Stable fixed design prevents unwanted movement in high-traffic areas | |
| Indoor public transport terminal seating | Corrosion-resistant materials hold up to routine cleaning and heavy use |
EU Market Access Requirements* EN Standards
| EN 16139:2013 | Furniture - Strength, durability and safety for non-domestic seating, applies to public area seating performance validation |
|---|
US and Canada office-furniture standards
| North America procurement and testing reference | ANSI/BIFMA X5.4 Public and Lounge Seating |
|---|
Standards applicable to China-market projects
| GB/T 3325-2017 | Metal furniture general technical conditions, applies to structural strength and finish requirements for this metal-frame public bench | |
|---|---|---|
| GB 18584-2001 | Indoor decorating and refurbishing materials limit of harmful substances, applies to PU and coating emission requirements | |
| Backrest static load capacity | 76 kg |
This product must meet the following technical requirements: 1. GB/T 3325-2017: Metal furniture general technical conditions, applies to structural strength and finish requirements for this metal-frame public bench; 2. GB 18584-2001: Indoor decorating and refurbishing materials limit of harmful substances, applies to PU and coating emission requirements; 3. Backrest static load capacity: 76 kg; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
