| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
| Overall dimensions | 1750 x 650 x 800 mm | |
|---|---|---|
| Single seat width | 580 mm | |
| Seat depth | 480 mm | |
| Seat height from floor | 430 mm | |
| Backrest height | 380 mm | |
| Armrest height from seat | 190 mm | |
| Leg spread width | 620 mm | |
| Backrest inclination angle | 10 degrees | |
| Divider bar width between seats | 30 mm | |
| Floor adjuster foot diameter | 40 mm | |
| Under-seat clearance height | 320 mm | |
| Armrest tube diameter | 32 mm | |
| Finished Seat Cushion Thickness | 90 mm | |
| Backrest Padding Thickness | 70 mm | |
| Lumbar Support Zone Height | 240 mm | |
| Clear Width Between Armrests | 540 mm |
Net weight / load capacity / users / durability
| Product net weight | 32 kg | |
|---|---|---|
| Per-seat static load capacity | 150 kg | |
| Seating capacity | 3 adults | |
| Frame static load test reference | 1000 kg | |
| Surface abrasion resistance | 5000 cycles | |
| Expected service life | 8 years | |
| Leveling foot adjustment range | 15 mm | |
| Chrome plating corrosion resistance | 96 hours | |
| Seat Foam Density / Rebound Reference | 45 kg/m³ / 65% | |
| Back Foam Density Reference | 38 kg/m³ |
Core acceptance fields · Panels / hardware / frame / upholstery
| Seat panels | 1.2mm thick perforated cold-rolled steel, chrome-plated finish | |
|---|---|---|
| Backrest panels | 1.0mm thick perforated cold-rolled steel, chrome-plated finish | |
| Armrests | 1.5mm thick bent chrome-plated steel tube, polished mirror finish | |
| Support frame crossbeam | 2.0mm thick rectangular steel tube with black powder-coated finish | |
| End support legs | 1.8mm thick chrome-plated cast steel, flared 3-prong design | |
| Floor contact feet | Chrome-plated steel with rubber anti-slip pads, adjustable leveling design | |
| Seat dividers | 1.2mm thick polished chrome-plated steel strip, welded between each seat position | |
| Weld points | Full penetration TIG welds, ground and polished to match chrome finish | |
| Perforation hole diameter | 6 mm | |
| Edge trim | Rolled smooth chrome-plated steel edging on all seat and back panel perimeters, 10mm bend radius | |
| Seat Internal Support Board Thickness | 14 mm bent plywood or equivalent support board | |
| Backrest Internal Frame Thickness | 14 mm bent plywood/composite reinforced frame |
Adjustment / rotation / tilt / mobility / storage features
| Seating configuration | 3 individual fixed seating positions separated by raised chrome dividers to prevent cross-occupancy | |
|---|---|---|
| Floor fixing provision | Adjustable leveling feet that can be secured to hard floor surfaces with expansion bolts | |
| Ventilation design | Perforated mesh seat and back panels allow continuous air circulation to prevent heat buildup during extended sitting | |
| Cleaning access | Open frame design with no enclosed under-seat cavities, enabling full access for floor cleaning and spill removal | |
| Armrest support | Continuous curved armrests at both outer ends and between seats to support arm weight and assist standing | |
| Corrosion resistance | Multi-layer chrome plating on all exposed steel surfaces to resist rust from regular cleaning and high humidity | |
| Anti-tip stability | Widely flared 3-point leg support at each end provides 6-point floor contact to prevent tipping even with uneven loading | |
| Vandal resistance | Fully welded steel construction with no removable external fasteners on exposed surfaces to prevent tampering or unauthorized disassembly | |
| Recline Angle / Lock Reference | 125° with 3suggested lock positions | |
| Tilt Tension User-weight Range | Reference adjustment coverage 120 kg | |
| Height Adjustment Stroke | 100 mm continuous travel | |
| Rotation / Mobility Configuration | 360° swivel with 5-caster multidirectional movement |
Verified carton / gross weight / assembly / loading data
| Number of packages | 1 | |
|---|---|---|
| Packaging carton dimensions | 1800 x 700 x 450 mm | |
| Gross shipping weight | 38 kg | |
| Packaging volume (CBM) | 0.57 | |
| Assembly time | 20 minutes | |
| 20ft GP container loading quantity | 52 units | |
| 40ft HQ container loading quantity | 128 units | |
| Reference Package Count | 1 set / 2 cartons | |
| Reference Assembly Time | 40 minutes per set | |
| Reference Carton Dimensions | 850× 420× 720 mm |
Recommended spaces / users / usage modes
| Hospital and clinic waiting areas | Smooth, non-porous chrome surface allows easy disinfection and frequent cleaning required for healthcare environments | |
|---|---|---|
| Airport, railway and bus station waiting zones | Heavy-duty steel construction withstands high daily passenger traffic and constant 24/7 use | |
| Bank, government office and public service hall waiting areas | Neutral chrome finish and divided seating maintains orderly queuing and professional appearance | |
| School and campus public waiting spaces | Tamper-resistant welded construction prevents vandalism and requires minimal maintenance | |
| Outdoor covered transit stops | Chrome-plated steel finish resists moisture and light weather exposure for semi-outdoor installation | |
| Recommended Matching Desk Size | 2.4 m executive desk | |
| Reference Daily Use Duration | 8 hours/day; confirm by ergonomic testing |
EU Market Access Requirements* EN Standards
| EN 16139:2013 | Furniture - Strength, durability and safety for non-domestic seating, applicable for commercial public area use load and stability testing | |
|---|---|---|
| EN 1022:2018 | Furniture - Seating - Determination of stability, applicable for anti-tip performance verification | |
| EN 13722:2004 | Furniture - Test methods for assessment of surface resistance to abrasion for metal furniture finishes |
US and Canada office-furniture standards
| North America procurement and testing reference | ANSI/BIFMA X5.4 Public and Lounge Seating |
|---|
Standards applicable to China-market projects
| GB/T 3324-2017 | General technical requirements for metal furniture, applicable for structural strength, surface finish, and safety edge requirements for this metal waiting bench | |
|---|---|---|
| GB/T 24821-2009 | Technical requirements for public waiting seating, applicable for seat load capacity, dimensional ergonomics, and stability requirements | |
| GB 18584-2001 | Limit of harmful substances for indoor furniture, applicable for heavy metal content limits on plated and coated surfaces |
This product must meet the following technical requirements: 1. GB/T 3324-2017: General technical requirements for metal furniture, applicable for structural strength, surface finish, and safety edge requirements for this metal waiting bench; 2. GB/T 24821-2009: Technical requirements for public waiting seating, applicable for seat load capacity, dimensional ergonomics, and stability requirements; 3. GB 18584-2001: Limit of harmful substances for indoor furniture, applicable for heavy metal content limits on plated and coated surfaces; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
