| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
| Overall dimensions | 1800 x 680 x 800 mm | |
|---|---|---|
| Seat height from floor | 450 mm | |
| Single seat width | 580 mm | |
| Seat depth | 480 mm | |
| Backrest height | 400 mm | |
| Backrest inclination | 105 degrees | |
| Armrest height from seat | 200 mm | |
| Floor clearance under seat | 320 mm | |
| Leg spread width (single leg assembly) | 750 mm | |
| Seat cushion thickness | 50 mm | |
| Perforated panel hole diameter | 8 mm | |
| Backrest pad thickness | 40 mm | |
| Armrest tube diameter | 32 mm | |
| Finished Seat Cushion Thickness | 90 mm | |
| Backrest Padding Thickness | 70 mm | |
| Lumbar Support Zone Height | 240 mm |
Net weight / load capacity / users / durability
| Net product weight | 28 kg | |
|---|---|---|
| Static load per seat | 150 kg | |
| Total bench static load capacity | 450 kg | |
| Recommended maximum continuous occupancy | 3 adults | |
| Static load per armrest | 80 kg | |
| Frame anti-tip stability load | 120 kg | |
| Adjustable foot leveling range | 15 mm | |
| Pad abrasion resistance | 50000 cycles | |
| Surface corrosion resistance | 48 hours | |
| Suggested warranty period for commercial use | 3 years |
Core acceptance fields · Panels / hardware / frame / upholstery
| Support frame and legs | 1.5mm thick cold-rolled steel tube, polished chrome plated | |
|---|---|---|
| Seat and back inner panels | 1.2mm thick perforated cold-rolled steel plate, chrome plated | |
| Armrests | 2.0mm thick bent chrome-plated steel, welded to frame structure | |
| Seat and back upholstered pads | 20kg/m³ density high-resilience polyurethane foam, covered with 1.0mm thick blue PU leather | |
| Seat gap dividers | Black ABS plastic trim pieces between adjacent seats | |
| Floor glides | Nylon base with adjustable threaded steel insert, chrome finished top cap | |
| Frame welding joints | Full argon arc welded joints, ground smooth before chrome plating | |
| Perforated surface | Round punched holes, 10mm hole spacing across exposed back panels | |
| Seam stitching on upholstery | Reinforced polyester thread, 8 stitches per inch seam pitch | |
| Seat upholstered pads | 20kg/m³ density high-resilience polyurethane foam, covered with 1.0mm thick blue PU leather | |
| Backrest upholstered pads | 18kg/m³ density high-resilience polyurethane foam, covered with 1.0mm thick blue PU leather | |
| Under-seat connecting beam | 2.0mm thick rectangular cold-rolled steel tube, chrome plated |
Adjustment / rotation / tilt / mobility / storage features
| Fixed gang seating configuration | Three connected individual seat positions mounted on a shared continuous beam frame | |
|---|---|---|
| Dual-material contact surface | Padded PU cushion/upper back provides soft contact, perforated steel lower back enables air circulation to reduce heat buildup during extended waiting | |
| Integrated armrests at both ends | Curved steel armrests at left and right bench ends provide upper body support and assist users when standing or sitting | |
| Adjustable floor leveling | Threaded glides on each leg adjust to compensate for uneven floor surfaces, eliminating rocking and reducing noise | |
| Wall-mount compatible design | Rear frame includes pre-set mounting points for optional anchoring to walls in high-security or high-traffic locations | |
| Bolt-together assembly | Frame sections connect with high-strength steel bolts and nuts, no permanent welding required for field assembly | |
| Easy cleaning surface | Smooth chrome plating and non-porous PU upholstery can be wiped down with standard disinfectant cleaners without damage | |
| Stackable storage capability for unassembled frames | Disassembled leg and beam components nest together to reduce warehouse storage space | |
| Integrated dual armrests | Curved steel armrests at left and right bench ends provide upper body support and assist users when standing or sitting | |
| Foam rebound performance | 40% rebound rate for seat cushion foam to maintain comfort without permanent indentation after long-term use; engineering based on commercial public seating foam specifications | |
| Recline Angle / Lock Reference | 125° with 3 suggested lock positions | |
| Tilt Tension User-weight Range | Reference adjustment coverage 120 kg |
Verified carton / gross weight / assembly / loading data
| Number of shipping cartons | 1 carton | |
|---|---|---|
| Shipping carton dimensions | 1850 x 720 x 220 mm | |
| Gross shipping weight | 32 kg | |
| Shipping volume per unit | 0.293 CBM | |
| On-site assembly time | 30 minutes | |
| 20ft GP container loading quantity | 76 units | |
| 40ft HQ container loading quantity | 185 units | |
| Packaging materials | 5-layer corrugated carton, EPS foam corner protection, PE wrap for metal parts, polybag for hardware kit | |
| Hardware kit contents | 16 sets of M8 hex bolts, washers and lock nuts, 1 assembly wrench | |
| Reference Package Count | 1 set / 2 cartons |
Recommended spaces / users / usage modes
| Hospital and clinic waiting areas | Durable, easy to clean construction meets hygiene requirements for healthcare facilities with high daily foot traffic | |
|---|---|---|
| Airport, railway and bus station waiting halls | High load capacity and robust metal frame withstand constant high turnover use in transit environments | |
| Government office and public service hall waiting zones | Formal, neutral blue and silver appearance matches official public space aesthetics, with accessible seat height for all adult users | |
| Bank and service center customer waiting areas | Comfortable padded seats reduce fatigue for customers waiting for service, with integrated armrests to support elderly and mobility-impaired users | |
| School and university reception or common areas | Stable construction resists damage from heavy student use, with no loose moving parts to reduce vandalism risk | |
| Optional row extension configuration | Multiple 3-seat units can be bolted end-to-end to create longer continuous seating rows for large waiting spaces | |
| Vaccination and temporary public waiting stations | Lightweight knock-down design allows fast deployment and reconfiguration for temporary public health or event waiting setups | |
| Recommended Matching Desk Size | 2.4 m executive desk |
EU Market Access Requirements* EN Standards
| EN 16139:2013 | Furniture - Strength, durability and safety for non-domestic seating | |
|---|---|---|
| EN 1022:2018 | Furniture - Seating - Determination of stability | |
| EN 13722:2004 | Furniture - Seating - Test methods for the determination of strength and durability of upholstered seats |
US and Canada office-furniture standards
| North America procurement and testing reference | ANSI/BIFMA X5.4 Public and Lounge Seating |
|---|
Standards applicable to China-market projects
| GB/T 3324-2017 | General technical requirements for metal furniture | |
|---|---|---|
| GB 18584-2001 | Limit of harmful substances in wooden furniture with upholstery | |
| GB/T 24821-2009 | Public furniture - Waiting seating |
This product must meet the following technical requirements: 1. GB/T 3324-2017: General technical requirements for metal furniture; 2. GB 18584-2001: Limit of harmful substances in wooden furniture with upholstery; 3. GB/T 24821-2009: Public furniture - Waiting seating; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
