| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
| Overall dimensions | 1500 x 590 x 390 mm | |
|---|---|---|
| Finished Seat Cushion Thickness | 90 mm | |
| Backrest Padding Thickness | 70 mm | |
| Lumbar Support Zone Height | 240 mm | |
| Clear Width Between Armrests | 540 mm |
Net weight / load capacity / users / durability
| Net weight per unit | 18 kg | |
|---|---|---|
| Single seat static load capacity | 300 kg | |
| Seat surface breathability | 25% open area | |
| Finish corrosion resistance (salt spray) | 48 hours | |
| Service life in high-traffic public areas | 10 years | |
| Leveling foot vertical adjustment range | 15 mm | |
| Structural cyclic load test cycles | 50000 cycles | |
| Seat Foam Density / Rebound Reference | 45 kg/m³ / 65% | |
| Back Foam Density Reference | 38 kg/m³ | |
| Upholstery Thickness / Abrasion Reference | 1.4 mm / 50000 cycles |
Core acceptance fields · Panels / hardware / frame / upholstery
| Seat surface | 1.5 mm perforated cold-rolled steel, chrome-plated finish | |
|---|---|---|
| Main support beam | 2.0 mm rectangular steel tube, chrome-plated | |
| Splayed leg assemblies | 1.5 mm cold-rolled steel, chrome-plated | |
| Seat dividers | 1.2 mm pressed steel, chrome-plated, rounded edges | |
| Leveling glide feet | Zinc-plated steel stem with non-slip rubber base | |
| Seat edge trim | 2.0 mm rolled steel, rounded polished edge | |
| Fixing hardware | Zinc-plated steel bolts and lock nuts | |
| Perforation pattern | Round staggered holes for easy wipe cleaning | |
| Seat Internal Support Board Thickness | 14 mm bent plywood or equivalent support board | |
| Backrest Internal Frame Thickness | 14 mm bent plywood/composite reinforced frame | |
| Gas-lift Engineering Specification | Recommended Class 4; outer tube 50 mm; stroke 100 mm | |
| Tilt Mechanism Plate Thickness | 2.5 mm cold-rolled steel |
Adjustment / rotation / tilt / mobility / storage features
| Fixed welded beam construction | Permanent rigid structure with no recline or folding mechanisms | |
|---|---|---|
| Integrated seat dividers | Raised dividers demarcate individual seating spaces to prevent crowding | |
| Adjustable leveling feet | Rotating feet adapt to uneven hard floors for stable installation | |
| Perforated easy-clean surface | Open mesh allows liquid drainage and quick wipe-down for public hygiene | |
| Modular configuration support | Beam design supports extension to 5seat units per order specifications | |
| Fixed backless seating | Low-profile design suitable for short-term waiting in high-throughput areas | |
| Stackable KD shipping design | Disassembles into beam, seats and leg sets for efficient transport | |
| Floor-mounted compatibility | Pre-drilled foot holes allow permanent bolting to hard floors if required | |
| Recline Angle / Lock Reference | 125° with 3suggested lock positions | |
| Tilt Tension User-weight Range | Reference adjustment coverage 120 kg | |
| Height Adjustment Stroke | 100 mm continuous travel | |
| Rotation / Mobility Configuration | 360° swivel with 5-caster multidirectional movement |
Verified carton / gross weight / assembly / loading data
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Carton Dimensions | 850× 420× 720 mm | |
| Reference Packaged Gross Weight | 23 kg/set | |
| Reference Carton Volume | 0.26 m³/set | |
| Indicative 20GP Loading | 135 sets at 85% space utilization | |
| Indicative 40HQ Loading | 320 sets at 85% space utilization |
Recommended spaces / users / usage modes
| Hospital outpatient waiting areas | Hygienic perforated surface supports frequent cleaning for medical environments | |
|---|---|---|
| Airport and railway station concourses | High-strength construction withstands continuous high-volume passenger use | |
| Bank and government service halls | Low-profile backless design allows flexible queuing and quick turnover seating | |
| Indoor public corridor rest areas | Slim profile does not obstruct pedestrian traffic flow | |
| School and office reception areas | Chrome finish provides a clean, professional appearance for institutional spaces | |
| Shopping mall rest zones | Ventilated perforated seat remains comfortable for short rests in warm environments | |
| Recommended Matching Desk Size | 2.4 m executive desk | |
| Reference Daily Use Duration | 8 hours/day; confirm by ergonomic testing |
EU Market Access Requirements* EN Standards
| EN 16139:2013 | Non-domestic seating strength, durability and stability requirements for public areas | |
|---|---|---|
| EN 1022:2018 | Furniture seating test method for stability assessment |
US and Canada office-furniture standards
| North America procurement and testing reference | ANSI/BIFMA X5.4 Public and Lounge Seating |
|---|
Standards applicable to China-market projects
| GB/T 3325-2017 | Metal furniture general technical requirements for structural strength and stability | |
|---|---|---|
| GB/T 4893.8-2013 | Furniture surface test for abrasion resistance of hard metal finishes | |
| GB 18584-2001 | Indoor furniture limit of harmful substances for indoor use |
This product must meet the following technical requirements: 1. GB/T 3325-2017: Metal furniture general technical requirements for structural strength and stability; 2. GB/T 4893.8-2013: Furniture surface test for abrasion resistance of hard metal finishes; 3. GB 18584-2001: Indoor furniture limit of harmful substances for indoor use; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
