Product supplierHigh-Back Mesh Ergonomic Task Chair with Headrest and Fixed Armrests, Black woven fabric over 80 mm molded foam with a rounded waterfall front
Contact the supplier for production scheduling and quotation.
PRODUCT MODULE 01 / 06
Physical Dimensions
Automatic mm / inch conversion · Core engineering specifications
Data source: Structured from factory data; final measured values prevail.
| Overall dimensions (W × D × H) | 650 × 650 × 1250 mm | |
|---|---|---|
| Overall footprint | 650 x 650 x 1250 mm | |
| Finished Seat Cushion Thickness | 90 mm | |
| Backrest Padding Thickness | 70 mm | |
| Lumbar Support Zone Height | 240 mm | |
| Clear Width Between Armrests | 540 mm |
PRODUCT MODULE 02 / 06
Weight, Load & Performance
Net weight / load capacity / users / durability
Data source: Product performance data; verify exact test conditions before procurement.
| Net weight | 16 kg | |
|---|---|---|
| Recommended user weight | 135 kg | |
| Seat static load verification target | 136 kg | |
| Backrest cyclic test target | 120000 cycles | |
| Seat-slide mechanism durability target | 60000 cycles | |
| Caster rolling durability target | 100000 cycles | |
| Gas-lift cycles | 100000 operations | |
| Recommended user height | 190 cm | |
| Seat Foam Density / Rebound Reference | 45 kg/m³ / 65% | |
| Back Foam Density Reference | 38 kg/m³ |
PRODUCT MODULE 03 / 06
Materials & Structure
Core acceptance fields · Panels / hardware / frame / upholstery
Data source: Subject to the factory material list and inspection report.
| Seat upholstery | Black woven fabric over 80 mm molded foam with a rounded waterfall front | |
|---|---|---|
| Seat foam | Molded polyurethane foam, 45 kg/m3 density and 38 percent rebound target | |
| Backrest mesh | Black tensioned polyester mesh held in a black polymer outer frame | |
| Back and seat inner frame | 12 mm glass-fiber-reinforced polypropylene seat shell with steel reinforcement plates | |
| Headrest | Curved mesh center panel with black polymer side padding and height-adjustable support | |
| Armrests | Injection-molded nylon T-arms with soft-touch polyurethane pads |
PRODUCT MODULE 04 / 06
Functions & Adjustment
Adjustment / rotation / tilt / mobility / storage features
Data source: Functional configuration; the supplier specification prevails.
| Seat height adjustment | Pneumatic right-hand lever raises the seat through a 100 mm stroke between 450 and 550 mm | |
|---|---|---|
| Synchronized recline | Backrest reclines 18 degrees from the upright position with seat-to-back linkage and one position lock | |
| Tilt tension control | Rotating tension knob adjusts resistance for users up to 135 kg | |
| Headrest adjustment | Height-adjustable curved headrest with 80 mm vertical travel and 15-degree angle tilt |
PRODUCT MODULE 05 / 06
Packaging & Logistics
Verified carton / gross weight / assembly / loading data
Data source: Reference for export quotations and container planning.
| Packed gross weight | 18 kg | |
|---|---|---|
| Reference Package Count | 1 set / 2 cartons | |
| Reference Assembly Time | 40 minutes per set | |
| Reference Carton Dimensions | 850× 420× 720 mm | |
| Reference Packaged Gross Weight | 23 kg/set | |
| Reference Carton Volume | 0.26 m³/set |
PRODUCT MODULE 06 / 06
Applications & Usage
Recommended spaces / users / usage modes
Data source: Recommended applications based on product form and category.
| Primary workplace use | Open-plan offices, home offices and workstation seating for adults 190 cm tall | |
|---|---|---|
| Flooring and layout suitability | Hard floors or low-pile carpets in individual workstations, meeting rooms and shared desks |
STANDARD S1
EU Market Entry Requirements * EN Standards
EU Market Access Requirements* EN Standards
| Office chair safety stability and strength | Recommended references: EN 1335:2018 | |
|---|---|---|
| Office chair dimensions | EN 1335:2020, office furniture dimensions for task chairs, useful for checking seat height and clearance | |
| Office chair durability | EN 1728:2012 test methods may be used for seat and back strength/durability acceptance | |
| Upholstered furniture flammability | BS EN 1021:2014 cigarette ignition test can be specified for upholstered seating fabric and foam |
STANDARD S2
North America Purchasing & Inspection Reference * ANSI/BIFMA Standards
US and Canada office-furniture standards
| Task chair safety and durability | ANSI/BIFMA X2017office chairs, suitable for strength, durability, stability and caster acceptance | |
|---|---|---|
| Low-emission furniture option | ANSI/BIFMA e2019furniture sustainability standard may be specified for emissions and material documentation |
STANDARD S3
Standards Applicable to China-Market Projects * GB Standards
Standards applicable to China-market projects
| Office chair safety suitability | GB/T 28004.1:2022, office chair safety, suitable as the Chinese-market procurement acceptance reference | |
|---|---|---|
| Office chair strength and durability | GB/T 28004.2:2022, office chair strength/durability, suitable for base, back, seat and caster verification |
Standardized tender description text
This product must meet the following technical requirements: 1. Office chair safety suitability: GB/T 28004.1:2022, office chair safety, suitable as the Chinese-market procurement acceptance reference; 2. Office chair strength and durability: GB/T 28004.2:2022, office chair strength/durability, suitable for base, back, seat and caster verification; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
GENERATED EXPORTS
Ready-to-use export tools
Export data is generated from the current published product record.
Technical Report PDF
Directly download an English report in metric or imperial units.
Complete Parameter Workbook
Download all product information and parameter modules in English.
International Listing Template
English title, specifications, materials, standards and purchasing fields.
Customs Declaration Data
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool