High-Back Mesh Executive Ergonomic Office Chair with Headrest and Footrest (model HB-MESH-FT-01) is listed under Mesh Office Chair. Dimensions: 670 × 700 × 1290 mm. Materials: Black flexible mesh stretched over a framed high-back structure, providing visible ventilated support; exact yarn and mesh density require supplier BOM confirmation.. Load capacity: 200 kg. Product Features: black,high-back,mesh-back,headrest,integrated,footrest,swivel,lumbar,support,five-star,base,twin-wheel,casters. This page consolidates 6 groups of specifications and ANSI/BIFMA standard references, with metric and imperial units. 1 supplier(s) are listed and you can request a quote online.
| Brand | FENGGUAN | Model | HB-MESH-FT-01 |
| Overall dimensions (W × D × H) | 670 × 700 × 1290 mm | Finished Seat Cushion Thickness | 90 mm |
| Backrest Padding Thickness | 70 mm | Lumbar Support Zone Height | 240 mm |
| Clear Width Between Armrests | 540 mm | Net weight | 18.5 kg |
| Recommended user weight capacity | 150 kg | Back tilt angle | 135 degrees |
| Seat height travel | 80 mm | Backrest static load acceptance target | 200 kg |
| Caster rolling durability target | 100000 cycles | Gas-lift durability target | 100000 height cycles |
| Recommended daily user duration | 8 hours | Seat Foam Density / Rebound Reference | 45 kg/m³ / 65% |
| Back Foam Density Reference | 38 kg/m³ | Backrest upholstery | Black flexible mesh stretched over a framed high-back structure, providing visible ventilated support; exact yarn and mesh density require supplier BOM confirmation. |
| Seat cushion | Black fabric-covered molded foam seat with a 70 mm target cushion thickness and rounded waterfall front; foam grade is not visibly marked. | Seat foam specification | Molded polyurethane foam with a target density of 45 kg/m3 and 40 percent ball rebound for office seating validation. |
| Frame and back support | Black molded polymer outer frame over an internal steel back-support frame; frame thickness and coating require supplier BOM confirmation. | Armrests | Fixed loop-style black polymer arm pads and supports bolted to the seat mechanism, with no visible height- or width-adjustment controls. |
| Seat Internal Support Board Thickness | 14 mm bent plywood or equivalent support board | Height adjustment | Pneumatic seat-height adjustment provides 80 mm travel through an under-seat lever and swivels 360 degrees around the central gas lift. |
| Recline mechanism | Synchro-style tilt mechanism supports a 135-degree maximum back angle with an under-seat tension lever; visible image does not confirm multi-position lock count. | Leg rest | A pull-out footrest rail is mounted under the seat and extends forward for reclined leg support; exact extension travel is not printed on the product. |
| Mobility and support | Five 60 mm twin-wheel casters on a 680 mm steel base provide rolling mobility, while the contoured mesh back gives fixed lumbar and neck support. | Reference Package Count | 1 set / 2 cartons |
| Reference Assembly Time | 40 minutes per set | Reference Carton Dimensions | 850× 420× 720 mm |
| Reference Packaged Gross Weight | 23 kg/set | Reference Carton Volume | 0.26 m³/set |
| Indicative 20GP Loading | 135 sets at 85% space utilization | Executive and office workstation use | Suitable for managerial desks, private offices, and full-shift computer work where head, lumbar, arm, and leg support are required. |
| Reclined short-break seating | The high back, headrest, and pull-out footrest support temporary reclining during breaks in an office or study room. | — | — |
| Time | Field | Original Value | Corrected Value | Note / Status |
|---|---|---|---|---|
No correction records yet. Found an error? Click the flag at the end of a row to report it. | ||||
Automatic mm / inch conversion · Core engineering specifications
Data source: Structured from factory data; final measured values prevail.
| Overall dimensions (W × D × H) | 670 × 700 × 1290 mm | |
|---|---|---|
| Finished Seat Cushion Thickness | 90 mm | |
| Backrest Padding Thickness | 70 mm | |
| Lumbar Support Zone Height | 240 mm | |
| Clear Width Between Armrests | 540 mm |
Net weight / load capacity / users / durability
Data source: Product performance data; verify exact test conditions before procurement.
| Net weight | 18.5 kg | |
|---|---|---|
| Recommended user weight capacity | 150 kg | |
| Back tilt angle | 135 degrees | |
| Seat height travel | 80 mm | |
| Backrest static load acceptance target | 200 kg | |
| Caster rolling durability target | 100000 cycles | |
| Gas-lift durability target | 100000 height cycles | |
| Recommended daily user duration | 8 hours | |
| Seat Foam Density / Rebound Reference | 45 kg/m³ / 65% | |
| Back Foam Density Reference | 38 kg/m³ |
Core acceptance fields · Panels / hardware / frame / upholstery
Data source: Subject to the factory material list and inspection report.
| Backrest upholstery | Black flexible mesh stretched over a framed high-back structure, providing visible ventilated support; exact yarn and mesh density require supplier BOM confirmation. | |
|---|---|---|
| Seat cushion | Black fabric-covered molded foam seat with a 70 mm target cushion thickness and rounded waterfall front; foam grade is not visibly marked. | |
| Seat foam specification | Molded polyurethane foam with a target density of 45 kg/m3 and 40 percent ball rebound for office seating validation. | |
| Frame and back support | Black molded polymer outer frame over an internal steel back-support frame; frame thickness and coating require supplier BOM confirmation. | |
| Armrests | Fixed loop-style black polymer arm pads and supports bolted to the seat mechanism, with no visible height- or width-adjustment controls. | |
| Seat Internal Support Board Thickness | 14 mm bent plywood or equivalent support board |
Adjustment / rotation / tilt / mobility / storage features
Data source: Functional configuration; the supplier specification prevails.
| Height adjustment | Pneumatic seat-height adjustment provides 80 mm travel through an under-seat lever and swivels 360 degrees around the central gas lift. | |
|---|---|---|
| Recline mechanism | Synchro-style tilt mechanism supports a 135-degree maximum back angle with an under-seat tension lever; visible image does not confirm multi-position lock count. | |
| Leg rest | A pull-out footrest rail is mounted under the seat and extends forward for reclined leg support; exact extension travel is not printed on the product. | |
| Mobility and support | Five 60 mm twin-wheel casters on a 680 mm steel base provide rolling mobility, while the contoured mesh back gives fixed lumbar and neck support. |
Verified carton / gross weight / assembly / loading data
Data source: Reference for export quotations and container planning.
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Carton Dimensions | 850× 420× 720 mm | |
| Reference Packaged Gross Weight | 23 kg/set | |
| Reference Carton Volume | 0.26 m³/set | |
| Indicative 20GP Loading | 135 sets at 85% space utilization |
Recommended spaces / users / usage modes
Data source: Recommended applications based on product form and category.
| Executive and office workstation use | Suitable for managerial desks, private offices, and full-shift computer work where head, lumbar, arm, and leg support are required. | |
|---|---|---|
| Reclined short-break seating | The high back, headrest, and pull-out footrest support temporary reclining during breaks in an office or study room. |
EU Market Access Requirements* EN Standards
US and Canada office-furniture standards
| North America procurement and testing reference | Recommended references: ANSI/BIFMA X5.1 |
|---|
Standards applicable to China-market projects
This product must meet the following technical requirements: 1. Technical standards and test reports must be supplied during tender or purchase confirmation; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
Admin WhatsApp