| Time | Field | Original Value | Corrected Value | Note / Status |
|---|---|---|---|---|
No correction records yet. Found an error? Click the flag at the end of a row to report it. | ||||
Automatic mm / inch conversion · Core engineering specifications
Data source: Structured from factory data; final measured values prevail.
| Overall unit dimensions | 914 x 406 x 2146 mm | |
|---|---|---|
| Left full-height closed door width | 320 mm | |
| Upper open shelving section height | 1396 mm | |
| Lower three-door closed cabinet height | 750 mm | |
| Largest open shelf compartment width | 600 mm | |
| Smallest open shelf compartment width | 180 mm | |
| Open shelf compartment depth | 380 mm | |
| Closed cabinet interior depth | 380 mm | |
| Door panel thickness | 18 mm | |
| Side panel thickness | 25 mm | |
| Adjustable shelf thickness | 18 mm | |
| Metallic edge trim width | 10 mm | |
| Back panel thickness | 8 mm | |
| Base plinth height | 50 mm | |
| Carcass Panel Thickness | 25 mm | |
| Door / Drawer Front Thickness | 22 mm | |
| Shelf Thickness | 25 mm |
Net weight / load capacity / users / durability
Data source: Product performance data; verify exact test conditions before procurement.
| Per open shelf static load capacity | 23 kg | |
|---|---|---|
| Door hinge cycle rating | 80000 open/close cycles | |
| Adjustable shelf load deflection limit | 2 mm at full rated load | |
| Anti-tip restraint load rating | 50 kg | |
| Unit net weight | 110 kg | |
| Shelf Distributed Load | 30 kg/shelf | |
| Drawer Slide Load / Life | 45 kg/pair; 50000 cycles | |
| Hinge Opening Angle / Life | 165°; 80000 cycles | |
| Anti-tip Fixing Reference | Products above 1200 mm should use at least 2 wall fixing points | |
| Recommended Procurement Warranty | Carcass 5 years; hardware 3 years; finish 2 years |
Core acceptance fields · Panels / hardware / frame / upholstery
Data source: Subject to the factory material list and inspection report.
| Carcass and frame | 25mm thick E1 grade engineered wood with matte black melamine finish | |
|---|---|---|
| Door panels | 18mm thick engineered wood with dark brown vertical wood-grain melamine veneer | |
| Edge trim | Powder-coated champagne gold metallic trim along vertical edges | |
| Shelf panels | 18mm thick E1 engineered wood with matching black melamine finish, 1mm PVC edge banding | |
| Back panel | 8mm thick MDF panel with black matte finish, fixed to carcass with hardware | |
| Hardware | Zinc-plated steel adjustable hinges, shelf pins, and wall-mounted anti-tip brackets |
Adjustment / rotation / tilt / mobility / storage features
Data source: Functional configuration; the supplier specification prevails.
| Upper open shelving | Asymmetric 8-compartment grid for display of books, decor and documents | |
|---|---|---|
| Left full-height cabinet | Single solid door enclosing full-height adjustable shelf storage for binders | |
| Lower right cabinet | Three equal-width solid doors enclosing adjustable shelf concealed storage | |
| Adjustable shelving | 32mm spaced shelf pin holes allow 25mm incremental shelf height adjustment |
Verified carton / gross weight / assembly / loading data
Data source: Reference for export quotations and container planning.
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Package Dimensions | 2100× 700× 350 mm/carton according to carcass split | |
| Reference Packaged Gross Weight | 100 kg/set in 3 cartons | |
| Reference Packaging Volume | 0.65 m³/set |
Recommended spaces / users / usage modes
Data source: Recommended applications based on product form and category.
| Executive office backdrop | Positioned behind executive desks to display awards, books and store documents | |
|---|---|---|
| Open office storage zone | Used in shared office areas for organized document and display storage |
EU Market Access Requirements* EN Standards
| EN 14749:2016 | Safety requirements for domestic and office storage furniture, anti-tip performance | |
|---|---|---|
| EN 312:2010 | Particleboard performance specifications for furniture load-bearing applications | |
| EN 15372:2008 | Durability requirements for office storage furniture, shelf and door cycles |
US and Canada office-furniture standards
| ANSI/BIFMA X5.9-2019 | Storage furniture performance and safety standard for office applications |
|---|
Standards applicable to China-market projects
| GB/T 3324-2017 | General technical requirements for wooden furniture, applicable to carcass and door construction | |
|---|---|---|
| GB 18580-2017 | Formaldehyde emission limits for wood-based panels, E1 grade ≤0.124mg/m³ | |
| GB/T 4897.3-2003 | Particleboard specifications for furniture use, applicable to carcass panels |
This product must meet the following technical requirements: 1. GB/T 3324-2017: General technical requirements for wooden furniture, applicable to carcass and door construction; 2. GB 18580-2017: Formaldehyde emission limits for wood-based panels, E1 grade ≤0.124mg/m³; 3. GB/T 4897.3-2003: Particleboard specifications for furniture use, applicable to carcass panels; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
Admin WhatsApp
