| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
| Overall dimensions | 3200 x 420 x 2200 mm | |
|---|---|---|
| Left glass door width | 800 mm | |
| Left glass door height | 1420 mm | |
| Left lower solid door height | 780 mm | |
| Open upper display shelf depth | 380 mm | |
| Open upper display shelf clearance height per tier | 350 mm | |
| Middle sliding solid door width | 800 mm | |
| Middle lower horizontal drawer/door panel height | 320 mm | |
| Lower wide open shelf length | 2400 mm | |
| Lower open shelf clearance height | 400 mm | |
| Lower compartment vertical divider width | 18 mm | |
| Base plinth height | 50 mm | |
| Edge banding thickness | 1 mm | |
| Back panel thickness | 9 mm | |
| Carcass Panel Thickness | 25 mm | |
| Door / Drawer Front Thickness | 22 mm |
Net weight / load capacity / users / durability
| Product net weight range | 280 kg | |
|---|---|---|
| Fixed shelf static load capacity per shelf | 30 kg | |
| Total maximum static storage load | 240 kg | |
| Recommended maximum number of standard A4 binders stored | 120 | |
| Integrated LED strip service life | 30000 hours | |
| Door/drawer hinge cycle rating | 80000 open/close cycles | |
| Drawer slide load rating | 25 kg | |
| Drawer slide cycle rating | 50000 open/close cycles | |
| Shelf Distributed Load | 30 kg/shelf | |
| Drawer Slide Load / Life | 45 kg/pair; 50000 cycles |
Core acceptance fields · Panels / hardware / frame / upholstery
| Main cabinet carcass panels | 18mm thick E0 grade MDF substrate with matte dark gray thermofoil laminate finish | |
|---|---|---|
| Left upper door panel | 5mm thick smoked tempered glass with bronze edge trim | |
| Solid door panels | 18mm MDF with matching matte dark gray laminate, wrapped soft-touch edge banding | |
| Decorative accent trim | 12mm wide brushed bronze anodized aluminum trim along door edges and cabinet dividers | |
| Fixed shelving panels | 25mm thick laminated MDF with matching edge banding, full-width supported on side panel dowels | |
| Internal hardware | Cold-rolled steel soft-close hinges and sliding door tracks with matte black finish | |
| Integrated lighting system | 4000K neutral white low-voltage LED strip lights recessed into front edge of upper shelves, with concealed wiring routed through cabinet panels | |
| Base plinth | 25mm thick laminated MDF with integrated adjustable leveler feet for floor alignment | |
| Back panel | 9mm thick MDF back panel with matching dark laminate finish, secured to carcass for wall stability | |
| Adjustable leveler feet | 10mm diameter nylon-padded steel feet, corrosion-resistant zinc plating | |
| Edge Band Thickness | 2 mm | |
| Primary Connector Specification | Reference M6-M8 cam/bolt fittings with at least 2 fixing points at major joints |
Adjustment / rotation / tilt / mobility / storage features
| Left section storage access | Hinged door with upper smoked glass and lower solid panel, fitted with soft-close hinges to provide enclosed, dust-protected storage for documents and items, with 95 degree door opening angle | |
|---|---|---|
| Central upper storage access | Horizontal sliding solid panel that slides left/right to conceal or reveal the central upper shelf compartment, eliminating door swing clearance requirements for tight office spaces | |
| Middle lower storage access | Three horizontal front panels (drawers or lift-up doors) providing enclosed concealed storage for office supplies and documents, fitted with push-to-open mechanisms for handleless design | |
| Open display shelving | Four tiered open shelves in the right upper bay and one full-width open shelf in the lower section, designed for book storage, decorative display, and frequently accessed items, integrated with LED accent lighting | |
| Integrated lighting operation | Recessed LED strips automatically activate with a hidden touch sensor on the cabinet side, or can be wired to wall switch control, illuminating shelf surfaces evenly without visible glare | |
| Stability adjustment | Four adjustable leveler feet integrated into the base plinth, allowing 15mm vertical adjustment to compensate for uneven office flooring and eliminate cabinet rock | |
| Wall anchoring provision | Pre-drilled anchor points on the cabinet back panel for securing to wall studs, preventing tip-over for commercial office safety compliance | |
| Cable management access | Concealed cable cutouts in back panels of lit shelf sections, allowing clean routing of LED power cords and any small AV device wiring without visible external cables | |
| Drawer operation | Concealed full-extension soft-close drawer slides, with 350mm travel length, self-closing activation at 50mm from fully closed position | |
| Cable / Vent Opening Reference | If fitted, 80 mm diameter |
Verified carton / gross weight / assembly / loading data
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Package Dimensions | 2100× 700× 350 mm/carton according to carcass split | |
| Reference Packaged Gross Weight | 100 kg/set in 3 cartons | |
| Reference Packaging Volume | 0.65 m³/set |
Recommended spaces / users / usage modes
| Executive private office | Installed as a back-of-desk storage wall behind an executive desk, providing document storage, display for awards and decor, and a polished professional backdrop for meetings | |
|---|---|---|
| Corporate boardroom | Positioned along a boardroom wall to store meeting materials, corporate awards, and presentation supplies, with integrated lighting enhancing the formal meeting space | |
| High-end home office | Installed in luxury residential home offices to combine book storage, work supply organization, and display for personal collections, with handleless design fitting modern residential interiors | |
| Managerial workspaces | Used in senior manager offices as a combined storage and presentation unit, balancing enclosed confidential document storage and open display for team-facing meetings | |
| Reception waiting areas | Placed behind reception desks to store office supplies, company literature, and branded decorative elements, creating a curated premium first impression for visitors |
EU Market Access Requirements* EN Standards
| EN 14073-2:2004 | Office storage furniture - Part 2: Safety requirements, applicable for structural stability, tip-over resistance, and edge safety validation | |
|---|---|---|
| EN 14074:2004 | Office furniture - Tables and desks and storage furniture - Test methods for strength and durability, applicable for shelf load and door cycle performance testing |
US and Canada office-furniture standards
| North America procurement and testing reference | ANSI/BIFMA X5.9 Storage Units |
|---|
Standards applicable to China-market projects
| GB/T 3324-2017 | General technical requirements for wooden furniture, applicable for dimensional tolerance, panel strength, and finish quality acceptance of this storage cabinet | |
|---|---|---|
| GB 18580-2017 | Formaldehyde emission limits for wood-based panels, minimum E1 grade required for procurement acceptance for indoor office use | |
| GB/T 4897.3-2003 | Performance requirements for particleboard/MDF used in furniture construction, applicable to carcass and shelf panel structural verification |
This product must meet the following technical requirements: 1. GB/T 3324-2017: General technical requirements for wooden furniture, applicable for dimensional tolerance, panel strength, and finish quality acceptance of this storage cabinet; 2. GB 18580-2017: Formaldehyde emission limits for wood-based panels, minimum E1 grade required for procurement acceptance for indoor office use; 3. GB/T 4897.3-2003: Performance requirements for particleboard/MDF used in furniture construction, applicable to carcass and shelf panel structural verification; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
