Modern Illuminated Office Display Storage Cabinet (model OF-STG-DSP-2440LED) is listed under Panel-type Filing Cabinet, with overall dimensions of 2400 × 400 × 2200 mm and main material of Particle‑board (PB). Load capacity: 136 kg. Certifications: Modern,style,asymmetric,open,shelving,closed,lower,storage,integrated,LED,lighting. This page consolidates 6 groups of specifications and GB / EN / ANSI/BIFMA standard references, with metric and imperial units. 1 supplier(s) are listed and you can request a quote online.
| Time | Field | Original Value | Corrected Value | Note / Status |
|---|---|---|---|---|
No correction records yet. Found an error? Click the flag at the end of a row to report it. | ||||
Automatic mm / inch conversion · Core engineering specifications
Data source: Structured from factory data; final measured values prevail.
| Overall unit dimensions | 2400 x 400 x 2200 mm | |
|---|---|---|
| Lower closed cabinet section height | 800 mm | |
| Middle textured accent band height | 120 mm | |
| Upper open display section total height | 1220 mm | |
| Open display shelf internal height | 350 mm | |
| Right curved display niche dimensions | 380 x 400 x 720 mm | |
| Lower cabinet door thickness | 18 mm | |
| Metal outer frame thickness | 20 mm | |
| Base plinth height | 60 mm | |
| Adjustable leveling foot height | 10 mm | |
| Open shelf divider thickness | 10 mm | |
| Edge banding thickness | 1 mm | |
| Carcass Panel Thickness | 25 mm | |
| Back Panel Thickness | 9 mm | |
| Door / Drawer Front Thickness | 22 mm | |
| Shelf Thickness | 25 mm |
Net weight / load capacity / users / durability
Data source: Product performance data; verify exact test conditions before procurement.
| Total unit static load capacity | 136 kg | |
|---|---|---|
| Soft-close hinge cycle rating | 80000 cycles | |
| Drawer slide load rating (if fitted) | 25 kg | |
| Net product weight | 120 kg | |
| LED strip service life | 30000 hours | |
| Anti-tip kit rated pull load | 50 kg | |
| Shelf Distributed Load | 30 kg/shelf | |
| Drawer Slide Load / Life | 45 kg/pair; 50000 cycles | |
| Hinge Opening Angle / Life | 165°; 80000 cycles | |
| Anti-tip Fixing Reference | Products above 1200 mm should use at least 2 wall fixing points |
Core acceptance fields · Panels / hardware / frame / upholstery
Data source: Subject to the factory material list and inspection report.
| Main cabinet carcass | E1-grade engineered wood with dark wood veneer finish | |
|---|---|---|
| Outer structural frame | Powder-coated dark grey steel | |
| Middle accent panel | Textured grey laminate composite panel | |
| Lower cabinet doors | MDF core with dark wood veneer, push-to-open hardware | |
| Open shelf dividers | Powder-coated thin steel | |
| Display lighting | Warm white recessed LED strip, mounted at shelf rear edge |
Adjustment / rotation / tilt / mobility / storage features
Data source: Functional configuration; the supplier specification prevails.
| Door operation | Push-to-open soft-close hinges, 110 degree opening angle | |
|---|---|---|
| Display lighting | Integrated warm white LED strips, hardwired low-voltage power supply | |
| Storage configuration | 4 full-width lower closed doors, asymmetric upper open cubbies, right-side curved illuminated niche | |
| Leveling adjustment | Adjustable foot pads at base for uneven floor alignment |
Verified carton / gross weight / assembly / loading data
Data source: Reference for export quotations and container planning.
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Package Dimensions | 2100× 700× 350 mm/carton according to carcass split | |
| Reference Packaged Gross Weight | 100 kg/set in 3 cartons | |
| Reference Packaging Volume | 0.65 m³/set |
Recommended spaces / users / usage modes
Data source: Recommended applications based on product form and category.
| Executive office backdrop | Wall-aligned storage and display for documents, awards and decorative items behind management desks | |
|---|---|---|
| Corporate reception display zone | Illuminated open shelving for company branding materials and curated decor in lobbies |
EU Market Access Requirements* EN Standards
| EN 14749:2016 | Safety and strength requirements for domestic and office storage furniture | |
|---|---|---|
| EN 62471:2008 | Photobiological safety for integrated LED lighting modules |
US and Canada office-furniture standards
| ANSI/BIFMA X5.9-2019 | Performance standard for office storage units, applicable for commercial grade durability testing |
|---|
Standards applicable to China-market projects
| GB/T 3324-2017 | General technical requirements for wooden furniture, applicable for panel and veneer cabinet construction | |
|---|---|---|
| GB/T 4897.3-2003 | Particleboard for furniture use, applicable for structural engineered wood components | |
| GB 7000.204-2008 | Safety requirements for built-in LED lighting systems in cabinetry |
This product must meet the following technical requirements: 1. GB/T 3324-2017: General technical requirements for wooden furniture, applicable for panel and veneer cabinet construction; 2. GB/T 4897.3-2003: Particleboard for furniture use, applicable for structural engineered wood components; 3. GB 7000.204-2008: Safety requirements for built-in LED lighting systems in cabinetry; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
Admin WhatsApp