| Submitted | Field | Original | 修改后参数 | Note / Status |
|---|---|---|---|---|
No parameter correction records exist. If you spot inaccurate data, click the flag icon at the end of the corresponding row to submit feedback. | ||||
Automatic mm / inch conversion · Core engineering specifications
| Overall dimensions | 1600 x 400 x 800 mm | |
|---|---|---|
| Top panel thickness | 25 mm | |
| Side panel thickness | 18 mm | |
| Internal shelf thickness | 18 mm | |
| Left sliding door compartment width | 700 mm | |
| Upper right open shelf height | 340 mm | |
| Middle open shelf height | 220 mm | |
| Lower right divided compartment height | 200 mm | |
| Lower cubby individual width | 430 mm | |
| Vertical edge trim width | 20 mm | |
| Primary Component Thickness | 40 mm according to load-bearing role | |
| Hardware / Moving-part Clearance | 5 mm operating clearance |
Net weight / load capacity / users / durability
| Total product net weight | 72 kg | |
|---|---|---|
| Top surface uniform static load capacity | 60 kg | |
| Recommended maximum stored item height | 320 mm | |
| Recommended number of users | 10 | |
| Reference Static Load | 150 kg depending on category | |
| Moving-part Durability Reference | Acceptance target 50000 cycles | |
| Recommended Procurement Warranty | Structure 5 years; hardware 3 years |
Core acceptance fields · Panels / hardware / frame / upholstery
| Top work surface | 25mm E1 grade particle board with dark woodgrain melamine finish, 1mm matching PVC edge banding | |
|---|---|---|
| Sliding door panel | 18mm particle board with vertical fluted dark woodgrain texture, top and bottom sliding track hardware | |
| Cabinet body and shelves | 18mm particle board with matte light grey melamine finish, 1mm grey PVC edge banding | |
| Side edge trims | 1mm thick ABS edge trim in matching matte grey | |
| Sliding door tracks | Cold-rolled steel with powder-coated grey finish, nylon roller glides | |
| Cabinet base plinth | 18mm particle board with matte grey melamine finish, flush floor-standing design | |
| Internal shelf supports | Zinc-plated steel shelf pins, 5mm diameter, 4 supports per shelf | |
| Internal dividers | 18mm particle board with matching matte grey melamine finish | |
| Primary Connector Specification | Reference M6-M10 with at least 2 fixing points at major joints | |
| Reference Finish / Color Count | Recommended 6finish options |
Adjustment / rotation / tilt / mobility / storage features
| Sliding door operation | Single left-side sliding panel travels along full-length horizontal tracks to fully enclose or expose left storage compartment, no protruding handles for flush aesthetic | |
|---|---|---|
| Open shelf adjustability | 3 removable shelves in open section allow repositioning along pre-drilled pin holes at 32mm increments to accommodate varying item heights | |
| Divided storage layout | Open section split into 1 upper large compartment, 1 middle wide compartment, 2 lower cubbies to support sorted document and supply storage | |
| Surface utility | Flat, scratch-resistant top surface provides additional display or work space for office equipment and decorative items | |
| Concealed storage function | Left behind-door compartment provides hidden storage for less frequently used items to maintain neat office appearance | |
| Floor-standing installation | Freestanding design requires no wall mounting, placed directly on level office flooring, base plinth distributes weight evenly across contact surface | |
| Reference Adjustment / Operating Range | 100 mm or 120° where applicable |
Verified carton / gross weight / assembly / loading data
| Number of shipping cartons | 1 | |
|---|---|---|
| Shipping carton dimensions | 1680 x 480 x 880 mm | |
| Gross shipping weight | 82 kg | |
| Shipping volume per unit | 0.71 CBM | |
| On-site assembly time | 40 minutes | |
| 40HQ container loading quantity | 72 units | |
| Reference Package Count | 1 set / 2 cartons | |
| Reference Assembly Time | 40 minutes per set | |
| Reference Packaging Volume | 0.8 m³/set | |
| Reference Packaged Gross Weight | 120 kg/set |
Recommended spaces / users / usage modes
| Executive office placement | Positioned behind an executive desk as a rear credenza to store files, supplies and display decorative items | |
|---|---|---|
| Open office shared storage | Placed along partition walls to provide shared document and office supply storage for 10person work teams | |
| Reception area storage | Installed behind reception desks to store administrative materials, brochures and reception supplies while maintaining a tidy aesthetic | |
| Meeting room side storage | Positioned along meeting room walls to store meeting materials, presentation supplies and refreshment accessories | |
| Small office home office (SOHO) use | Suitable for home office spaces to organize documents, office equipment and personal items, doubles as a display surface for decor |
European market access and chemical requirements
| EN 14073-2:2004 | Office furniture - Storage furniture - Part 2: Safety requirements, applicable for structural stability, load capacity and sharp edge verification | |
|---|---|---|
| EN 14073-3:2004 | Office furniture - Storage furniture - Part 3: Test methods for stability and strength, applicable for load cycle and structural integrity testing |
US and Canada office-furniture standards
Standards applicable to China-market projects
| GB/T 3324-2017 | General technical requirements for wooden furniture, applicable for dimensional tolerance, edge finishing and structural stability verification | |
|---|---|---|
| GB 18580-2017 | Formaldehyde emission limit for wood-based panels, minimum E1 grade (0.124mg/m³) required for indoor office use |
This product must meet the following technical requirements: 1. GB/T 3324-2017: General technical requirements for wooden furniture, applicable for dimensional tolerance, edge finishing and structural stability verification; 2. GB 18580-2017: Formaldehyde emission limit for wood-based panels, minimum E1 grade (0.124mg/m³) required for indoor office use; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export ToolThis modern sliding door office storage credenza features a clean, streamlined two-tone silhouette designed for contemporary workspaces. The unit presents a flush, handleless left storage compartment fronted by a vertical fluted dark woodgrn sliding door, pred with an open shelving section on the right and a matte light grey cabinet body. Subtle matching matte grey vertical edge trims line the left and right cabinet sides, creating a refined, unbroken visual profile that balances textured detl with understated neutral finishes. Constructed from durable melamine-faced particle board, the credenza uses panel gauges aligned with commercial furniture standards: a thick top work surface with dark woodgrn melamine finish and matching PVC edge banding, structural side and internal panels with matte grey melamine and coordinated edge banding, and impact-resistant ABS edge trim on exposed vertical edges. The sliding door operates smoothly on powder-coated cold-rolled steel tracks with nylon roller glides, while zinc-plated steel shelf pins support adjustable internal shelving. The flush, floor-standing base plinth sits directly on level flooring without adjustable feet, distributing weight evenly across its contact surface. Functionally, the unit blends concealed and open storage to support organized workspaces. The left sliding door compartment fully encloses stored items to keep less frequently used materials out of sight, while the right open section includes one upper large compartment, one middle wide compartment, and two equally sized lower cubbies for sorted access to frequently used documents, binders, and supplies. Three removable shelves in the open section can be repositioned to accommodate items of varying heights. The scratch-resistant flat top surface provides additional space for small office equipment, document stacks, or decorative objects, with sufficient static load capacity for standard workspace use. This credenza suits a range of commercial and residential work settings. It works as a rear storage piece behind executive desks, shared zone storage along open office partition walls for 10-person work teams, tidy behind-desk storage in reception areas, low-profile side storage in meeting rooms that does not block sightlines to presentation screens, and compact, functional storage for small or home offices where shallow depth prevents overcrowding. For procurement planning, note that the unit ships in a single carton with protective foam padding; flat-packed units have an on-site assembly time of 40 minutes for one person equipped with a basic screwdriver. Formaldehyde grade for core board materials requires confirmation via supplier bill of materials prior to purchase, and delivery logistics should account for listed shipping dimensions, gross weight, and shipping volume per unit.
Follow Us