| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
| overall dimensions | 2390 x 430 x 2120 mm | |
|---|---|---|
| left closed storage section width | 800 mm | |
| right open shelving section width | 1590 mm | |
| internal closed storage depth | 400 mm | |
| open shelf vertical clearance between tiers | 330 mm | |
| fluted glass panel tier height | 330 mm | |
| open shelf front edge thickness | 25 mm | |
| solid door panel thickness | 18 mm | |
| back panel thickness | 9 mm | |
| rounded top corner radius | 50 mm | |
| base plinth height | 50 mm | |
| fluted glass panel thickness | 8 mm | |
| Carcass Panel Thickness | 25 mm | |
| Door / Drawer Front Thickness | 22 mm | |
| Shelf Thickness | 25 mm |
Net weight / load capacity / users / durability
| total unit static load capacity | 57 kg | |
|---|---|---|
| laminate surface abrasion resistance | 2000 cycles | |
| fluted glass panel impact resistance | Tempered grade, 5x impact strength vs annealed glass | |
| LED strip rated operational lifespan | 30000 hours | |
| hinge cycle rating for left doors | 80000 open/close cycles | |
| edge band peel strength | 1.5 N/mm | |
| Shelf Distributed Load | 30 kg/shelf | |
| Drawer Slide Load / Life | 45 kg/pair; 50000 cycles | |
| Hinge Opening Angle / Life | 165°; 80000 cycles | |
| Anti-tip Fixing Reference | Products above 1200 mm should use at least 2 wall fixing points |
Core acceptance fields · Panels / hardware / frame / upholstery
| main carcass | E1 grade medium density fiberboard, 18mm thick, 0.7g/cm³ density | |
|---|---|---|
| left door panels | Herringbone pattern wood veneer over MDF substrate, matte clear seal finish | |
| open shelf interiors | Matte light grey laminate finish, scratch and stain resistant surface | |
| middle fluted panel | Semi-transparent vertically ribbed (fluted) tempered glass | |
| under-shelf lighting | Recessed linear LED strip lights, warm white 4000K color temperature | |
| shelf dividers | 18mm thick matching laminate MDF, dividing right section into asymmetric bays | |
| edge banding | 1mm thick PVC edge banding matching door and shelf finish | |
| base plinth | Matching dark wood veneer MDF, full width floor contact support | |
| door hinges | Concealed soft-close steel hinges, nickel plated finish | |
| Edge Band Thickness | 2 mm | |
| Primary Connector Specification | Reference M6-M8 cam/bolt fittings with at least 2 fixing points at major joints | |
| Reference Finish / Color Count | Recommended 6finish options |
Adjustment / rotation / tilt / mobility / storage features
| left section storage | Two full-height hinged solid doors enclosing adjustable shelving for concealed document storage | |
|---|---|---|
| open shelf display | Five tiered asymmetric open shelves split into two bays for displayed items and reference materials | |
| integrated lighting | Recessed under-shelf LED strips illuminate each open shelf tier, hardwired with wall switch control | |
| semi-concealed storage tier | Middle tier fluted glass panel hides stored items while allowing light transmission across both bays | |
| anti-tip safety | Two included wall anchor connectors secure unit to wall to prevent forward tipping | |
| adjustable shelving | Closed cabinet shelves support 3 height positions with 50mm incremental adjustment | |
| soft-close doors | Concealed hinges provide 110 degree door opening with automatic soft-close damping in final 15 degrees of travel | |
| cable management | Rear access cutouts on open shelves allow concealed power routing for LED lighting and displayed devices | |
| Cable / Vent Opening Reference | If fitted, 80 mm diameter |
Verified carton / gross weight / assembly / loading data
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Package Dimensions | 2100× 700× 350 mm/carton according to carcass split | |
| Reference Packaged Gross Weight | 100 kg/set in 3 cartons | |
| Reference Packaging Volume | 0.65 m³/set |
Recommended spaces / users / usage modes
| executive office backdrop | Placed behind executive desks for combined open display of awards and concealed file storage | |
|---|---|---|
| open office break area storage | Used for displaying reading materials, decor and storing office supplies in shared work zones | |
| reception area display | Positioned in lobby areas to display company credentials, decor and visitor information | |
| private study home office | Installed in home workspaces for book storage and personal item display | |
| meeting room ancillary storage | Placed along meeting room walls to store reference materials, presentation supplies and refreshments | |
| recommended complementary furniture | Paired with light wood executive desks and ergonomic office seating for coordinated office interiors |
EU Market Access Requirements* EN Standards
| EN 14749:2016 | Safety and strength requirements for domestic and office storage furniture and kitchen worktops | |
|---|---|---|
| EN 12521:2015 | Furniture strength, durability and safety requirements for non-domestic storage units | |
| EN 14073-2:2004 | Office storage furniture, safety and strength requirements for filing and display cabinets |
US and Canada office-furniture standards
| North America procurement and testing reference | Recommended references: ANSI/BIFMA X5.9 |
|---|
Standards applicable to China-market projects
| GB/T 3324-2017 | General technical requirements for wooden furniture, applicable to dimensional and structural quality checks | |
|---|---|---|
| GB 18580-2017 | Formaldehyde emission limits for wood-based panels, E1 grade ≤0.124mg/m³ for interior use | |
| GB/T 4893.8-2013 | Surface abrasion resistance test method for furniture finishes | |
| GB/T 10357.5-2011 | Strength and durability test for storage furniture shelving and cabinet structures |
This product must meet the following technical requirements: 1. GB/T 3324-2017: General technical requirements for wooden furniture, applicable to dimensional and structural quality checks; 2. GB 18580-2017: Formaldehyde emission limits for wood-based panels, E1 grade ≤0.124mg/m³ for interior use; 3. GB/T 4893.8-2013: Surface abrasion resistance test method for furniture finishes; 4. GB/T 10357.5-2011: Strength and durability test for storage furniture shelving and cabinet structures; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
