| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
| Overall dimensions | 2400 x 400 x 2000 mm | |
|---|---|---|
| Left solid sliding door width | 600 mm | |
| Single open display shelf height | 320 mm | |
| Middle drawer unit height | 160 mm | |
| Lower plinth base height | 50 mm | |
| Glass display door section width | 900 mm | |
| Shelf panel thickness | 25 mm | |
| Smoked glass door thickness | 8 mm | |
| Bottom closed cabinet compartment height | 400 mm | |
| Dark wood feature shelf thickness | 30 mm | |
| Carcass Panel Thickness | 25 mm | |
| Back Panel Thickness | 9 mm | |
| Door / Drawer Front Thickness | 22 mm | |
| Shelf Thickness | 25 mm |
Net weight / load capacity / users / durability
| Total unit net weight | 165 kg | |
|---|---|---|
| Per shelf static load capacity | 30 kg | |
| Total enclosed storage volume | 0.72 m³ | |
| Integrated LED power rating | 24 W | |
| Recommended maximum load for top surface | 40 kg | |
| Top surface maximum static load | 40 kg | |
| Soft-close hinge cycle rating | 80000 cycles | |
| Full-extension drawer slide cycle rating | 50000 cycles | |
| Anti-tip connector load rating | 50 kg | |
| Shelf Distributed Load | 30 kg/shelf |
Core acceptance fields · Panels / hardware / frame / upholstery
| Main cabinet carcass | E1 grade 18mm thick MDF with matte dark grey polyurethane lacquer finish | |
|---|---|---|
| Left sliding door panel | Smoked eucalyptus vertical grain natural wood veneer over 18mm MDF substrate | |
| Glass door panels | 5mm thick grey-tinted semi-transparent tempered glass with black anodized aluminum frame trim | |
| Display shelf surfaces | 18mm MDF with matching matte grey lacquer, select lower shelves finished with dark wood veneer to match left door | |
| Plinth base frame | 2mm thick powder-coated matte dark grey carbon steel | |
| Drawer and door hardware | Soft-close concealed hinges and full-extension drawer slides with 15kg load rating | |
| Integrated lighting system | 4000K neutral white low-voltage LED strip lights recessed under each upper shelf, with touch-sensitive dimming control | |
| Back paneling | 9mm thick MDF with matte dark grey finish | |
| Right section glass door panels | 8mm thick grey-tinted semi-transparent tempered glass with 1mm thick black anodized aluminum frame trim | |
| Standard display shelf surfaces | 25mm MDF with matching matte grey lacquer finish, sealed edge treatment | |
| Dark wood accent display shelves | 30mm MDF substrate with smoked eucalyptus veneer match to left sliding door, matte clear topcoat | |
| Door and drawer hardware | Soft-close concealed 110-degree hinges, bottom-mounted full-extension ball-bearing drawer slides with 15kg load rating |
Adjustment / rotation / tilt / mobility / storage features
| Left compartment access | Vertical wood grain sliding door operates on bottom-mounted track to reveal full-height closed storage for files and office supplies | |
|---|---|---|
| Middle storage layout | Three tiers of open display shelves separated by two soft-close drawers for concealed small item storage, with dedicated LED lighting for each shelf level | |
| Right glass cabinet access | Two frameless smoked glass hinged doors open to reveal three illuminated display shelves above two lower soft-close closed storage cabinets | |
| Lighting operation | Recessed LED strips activate via hidden touch switch on cabinet side, with 3 brightness levels for display accent lighting | |
| Storage compartment design | Fixed-height shelves optimized for standard A4 files, hardcover books, and decorative office objects, with no adjustable shelf positions in open display zones | |
| Floor leveling system | Adjustable feet integrated into plinth base allow 10mm height adjustment to accommodate uneven office floors | |
| Edge profile | All cabinet corners feature 20mm radius rounded edges to eliminate sharp contact points in high-traffic office areas | |
| Shelf configuration | Fixed-height shelves optimized for 320mm vertical clearance to accommodate A4 files, 300mm tall hardcover books, and standard decorative office objects, with no adjustable shelf positions in open display zones | |
| Edge safety profile | All cabinet corners feature 20mm radius rounded edges on all exposed vertical and horizontal corners to eliminate sharp contact points in high-traffic office areas | |
| Anti-tip safety | 2 steel anti-tip brackets secure the cabinet rear to finished wall surfaces, preventing forward tipping when fully loaded with open drawers or doors | |
| Drawer operation | Middle and lower soft-close drawers travel 100% of their internal depth on full-extension slides, allowing complete access to rear stored items without overhang | |
| Door damping function | All hinged solid and glass doors include integrated soft-close dampers that engage in the final 15 degrees of closing travel to eliminate impact noise and wear |
Verified carton / gross weight / assembly / loading data
| Number of shipping packages | 3 | |
|---|---|---|
| Shipping carton dimensions | 2450 x 450 x 300 mm per master carton, plus 2 smaller hardware and accessory cartons | |
| Total shipping gross weight | 185 kg | |
| Total shipping volume | 0.36 CBM | |
| On-site assembly time | 120 minutes for 2 trained installers | |
| 40HQ container loading quantity | 72 units | |
| Packaging material | 5-layer corrugated carton with expanded polystyrene corner protection and stretch wrap | |
| Reference Package Count | 1 set / 2 cartons | |
| Reference Assembly Time | 40 minutes per set | |
| Reference Package Dimensions | 2100× 700× 350 mm/carton according to carcass split |
Recommended spaces / users / usage modes
| Executive office space | Placed behind a 2m+ executive desk as a backdrop for displaying awards, books, and decorative objects while storing confidential documents | |
|---|---|---|
| Corporate boardroom | Installed along boardroom walls to store meeting materials, corporate awards, and presentation supplies with accent lighting for brand display | |
| High-end reception area | Positioned behind reception desks to display corporate credentials, decorative objects, and visitor reading materials | |
| Private manager workspace | Used for mixed storage of work documents, personal items, and display pieces without blocking walkways | |
| Recommended matching furniture | Paired with matching matte grey executive desks, leather guest seating, and dark wood accent tables for a cohesive office aesthetic | |
| Executive office backdrop | Placed behind a 2200mm+ executive desk as a rear backdrop for displaying awards, collectibles, and reference books while storing confidential documents in closed compartments | |
| High-end reception display | Positioned behind reception desks to display corporate credentials, decorative objects, and visitor reading materials without blocking reception sightlines | |
| Private manager workspace storage | Used for mixed storage of work documents, personal items, and display pieces without blocking walkways, with 400mm shallow depth to avoid protruding into 1200mm wide office circulation paths |
EU Market Access Requirements* EN Standards
| EN 14749:2016 | Safety and performance requirements for domestic and kitchen storage units, applicable for structural strength and stability testing | |
|---|---|---|
| EN 12521:2015 | Furniture - Strength, durability and safety - Requirements for domestic storage furniture, applicable for load and cycle performance verification |
US and Canada office-furniture standards
| North America procurement and testing reference | ANSI/BIFMA X5.9 Storage Units |
|---|
Standards applicable to China-market projects
| GB/T 3324-2017 | General technical requirements for wooden furniture, applicable for structural stability, finish durability, and dimensional tolerance acceptance | |
|---|---|---|
| GB 18580-2017 | Formaldehyde emission limits for wood-based panels used in interior decoration and finishing materials, applicable for carcass MDF formaldehyde content verification | |
| GB/T 4897.3-2015 | Particleboard and fiberboard for furniture use, applicable for verifying structural panel mechanical performance |
This product must meet the following technical requirements: 1. GB/T 3324-2017: General technical requirements for wooden furniture, applicable for structural stability, finish durability, and dimensional tolerance acceptance; 2. GB 18580-2017: Formaldehyde emission limits for wood-based panels used in interior decoration and finishing materials, applicable for carcass MDF formaldehyde content verification; 3. GB/T 4897.3-2015: Particleboard and fiberboard for furniture use, applicable for verifying structural panel mechanical performance; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
