| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
| Overall dimensions | 3600 x 400 x 2200 mm | |
|---|---|---|
| Carcass Panel Thickness | 25 mm | |
| Back Panel Thickness | 9 mm | |
| Door / Drawer Front Thickness | 22 mm | |
| Shelf Thickness | 25 mm |
Net weight / load capacity / users / durability
| Unit net weight | 380 kg | |
|---|---|---|
| Per shelf static load capacity | 40 kg | |
| Total storage capacity | 1200 L | |
| Recommended maximum uniform top load | 60 kg | |
| Door hinge cycle rating | 50000 open/close cycles | |
| Drawer slide cycle rating | 40000 open/close cycles | |
| Structural service life | 15 years | |
| Shelf Distributed Load | 30 kg/shelf | |
| Drawer Slide Load / Life | 45 kg/pair; 50000 cycles | |
| Hinge Opening Angle / Life | 165°; 80000 cycles |
Core acceptance fields · Panels / hardware / frame / upholstery
| Primary frame | Solid rubberwood, kiln-dried to 12% moisture content | |
|---|---|---|
| Door and shelf panels | Medium density fiberboard with walnut wood veneer finish, 0.6mm veneer thickness | |
| Decorative carvings | Solid wood relief carvings, polished clear lacquer topcoat | |
| Lattice door slats | Solid wood vertical slats, 15mm width, 10mm gap between slats | |
| Hardware (handles) | Zinc alloy antique brass finish pull handles, 96mm hole spacing | |
| Door hinges | Cold-rolled steel soft-close concealed hinges, nickel plated finish | |
| Drawer slides | Cold-rolled steel side-mount 3-section full extension slides, zinc plated | |
| Surface finish | Clear matte PU lacquer, 3 spray layers, abrasion resistant coating | |
| Back panel | 5mm thick hardboard, wood grain laminate finish | |
| Edge Band Thickness | 2 mm | |
| Primary Connector Specification | Reference M6-M8 cam/bolt fittings with at least 2 fixing points at major joints | |
| Reference Finish / Color Count | Recommended 6finish options |
Adjustment / rotation / tilt / mobility / storage features
| Storage layout | 5 open display shelves, 4 soft-close doors, 4 soft-close drawers, 2 lower open compartments | |
|---|---|---|
| Door operation | Central lattice doors and side solid doors open 110 degrees outward, with soft-close damping | |
| Drawer operation | Four side drawers extend fully 350mm, with soft-close auto-retract in final 50mm of travel | |
| Shelf adjustability | All closed cabinet compartments have 50mm spaced shelf pin holes, allowing 3 height positions | |
| Cable management | Central open compartment has rear cable pass-through cutout, 60mm diameter, for AV equipment wiring | |
| Ventilation design | Central lattice doors provide passive air circulation for stored items, no accumulation of stale air | |
| Anti-tip function | Wall anchor brackets included, secured to wall studs to prevent forward tipping during use | |
| Modular assembly | Three separate base units join together with connecting bolts for stable installation and easy transport | |
| Cable / Vent Opening Reference | If fitted, 80 mm diameter |
Verified carton / gross weight / assembly / loading data
| Number of packages | 6 | |
|---|---|---|
| Total gross shipping weight | 430 kg | |
| Total shipping volume | 1.48 CBM | |
| Assembly time | 120 minutes | |
| 20ft GP container loading quantity | 18 units | |
| 40ft HQ container loading quantity | 46 units | |
| Reference Package Count | 1 set / 2 cartons | |
| Reference Assembly Time | 40 minutes per set | |
| Reference Package Dimensions | 2100× 700× 350 mm/carton according to carcass split | |
| Reference Packaged Gross Weight | 100 kg/set in 3 cartons |
Recommended spaces / users / usage modes
| Executive office | Pair with matching executive desk for full-wall storage behind workstations, holding files and display pieces | |
|---|---|---|
| Conference room | Used as rear storage for meeting materials, awards, and tea service supplies | |
| Private study | Home office storage for books, collectibles, and document organization | |
| Cultural institution reception | Display decorative art and institutional documents in formal reception areas | |
| Tea room | Store tea sets, tea cakes, and tea ceremony accessories alongside display shelves | |
| Recommended configuration | Pair with matching L-shaped executive desk and Chinese style office chair for complete set |
EU Market Access Requirements* EN Standards
| EN 14749:2016 | Domestic and kitchen storage units and worktops - safety requirements and test methods | |
|---|---|---|
| EN 12521:2015 | Furniture - strength, durability and safety - requirements for non-domestic storage furniture | |
| EN 71-3:2019 | Safety of toys - migration of certain elements, applicable for surface coating heavy metal limits |
US and Canada office-furniture standards
| North America procurement and testing reference | ANSI/BIFMA X5.9 Storage Units |
|---|
Standards applicable to China-market projects
| GB/T 3324-2017 | General technical requirements for wooden furniture, applicable for dimensional tolerance and finish quality | |
|---|---|---|
| GB 18584-2001 | Indoor decorating and refurbishing materials - limit of harmful substances in wood furniture, formaldehyde emission ≤1.5mg/L | |
| GB/T 4897.3-2003 | Particleboard for furniture use, applicable for structural panel performance requirements |
This product must meet the following technical requirements: 1. GB/T 3324-2017: General technical requirements for wooden furniture, applicable for dimensional tolerance and finish quality; 2. GB 18584-2001: Indoor decorating and refurbishing materials - limit of harmful substances in wood furniture, formaldehyde emission ≤1.5mg/L; 3. GB/T 4897.3-2003: Particleboard for furniture use, applicable for structural panel performance requirements; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
