| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
| Overall dimensions | 3200 x 400 x 2200 mm | |
|---|---|---|
| Lower closed storage cabinet height | 500 mm | |
| Individual narrow open shelf internal height | 320 mm | |
| Tall vertical closed panel height | 1300 mm | |
| Wide open display shelf internal depth | 350 mm | |
| Open shelf internal width (narrow left/right) | 380 mm | |
| Wide horizontal open shelf internal width | 1200 mm | |
| Upper small closed wood compartment width | 700 mm | |
| Outer frame profile thickness | 30 mm | |
| Open shelf backing panel thickness | 18 mm | |
| Carcass Panel Thickness | 25 mm | |
| Back Panel Thickness | 9 mm | |
| Door / Drawer Front Thickness | 22 mm | |
| Shelf Thickness | 25 mm |
Net weight / load capacity / users / durability
| Total unit static load capacity | 300 kg | |
|---|---|---|
| Lower closed cabinet drawer/door static load | 45 kg | |
| LED power supply rating | 40 W | |
| Finish surface scratch resistance | 2000 cycles | |
| Product net weight | 220 kg | |
| Recommended wall anchor load rating | 150 kg | |
| Shelf Distributed Load | 30 kg/shelf | |
| Drawer Slide Load / Life | 45 kg/pair; 50000 cycles | |
| Hinge Opening Angle / Life | 165°; 80000 cycles | |
| Anti-tip Fixing Reference | Products above 1200 mm should use at least 2 wall fixing points |
Core acceptance fields · Panels / hardware / frame / upholstery
| Outer frame | 30mm dark powder-coated steel extrusion | |
|---|---|---|
| Open shelf backing panels | 18mm dark matte gray melamine-faced MDF | |
| Closed cabinet panels | 18mm dark wood grain melamine-faced particleboard | |
| Edge banding | 2mm matte PVC edge trim on all exposed panel edges | |
| Shelf lighting | Recessed 24V warm white LED strip along each shelf front edge | |
| Cabinet door hardware | Soft-close press-to-open bounce hinges for lower cabinet doors | |
| Back panel (unit rear) | 9mm dark melamine hardboard | |
| Wall anchoring hardware | Zinc-plated steel anti-tip brackets with wall screws | |
| Edge Band Thickness | 2 mm | |
| Primary Connector Specification | Reference M6-M8 cam/bolt fittings with at least 2 fixing points at major joints | |
| Reference Finish / Color Count | Recommended 6finish options |
Adjustment / rotation / tilt / mobility / storage features
| LED shelf lighting | Recessed warm white strips illuminate all open display compartments, hardwired with wall switch | |
|---|---|---|
| Lower cabinet storage | Three handleless press-to-open doors enclose full-width lower storage for documents and office supplies | |
| Upper closed storage | Two small handleless dark wood compartments in upper right provide concealed small-item storage | |
| Open display shelves | Mixed narrow and wide fixed open shelves for decor, awards, and reference materials | |
| Tall solid panel section | Full-height closed dark panel in left-middle conceals vertical storage or cable management | |
| Door operation | Lower and upper cabinet doors open to 110 degrees with soft-close damping | |
| Surface maintenance | Stain-resistant melamine surfaces clean with damp cloth, no special cleaning agents required | |
| Cable / Vent Opening Reference | If fitted, 80 mm diameter |
Verified carton / gross weight / assembly / loading data
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Package Dimensions | 2100× 700× 350 mm/carton according to carcass split | |
| Reference Packaged Gross Weight | 100 kg/set in 3 cartons | |
| Reference Packaging Volume | 0.65 m³/set |
Recommended spaces / users / usage modes
| Executive office back wall installation | Positioned behind executive desks for document storage and corporate decor display | |
|---|---|---|
| Reception area display wall | Used to display company awards, branded materials, and decorative items in public office spaces | |
| Conference room storage wall | Installed along conference room walls to store meeting materials and AV accessories | |
| Manager private office storage | Provides mixed open and closed storage for office supplies, reference books, and personal items | |
| Recommended installation note | Must be secured to wall with anti-tip hardware for seismic and tip-over safety in commercial spaces |
EU Market Access Requirements* EN Standards
| EN 1728:2014 | Furniture – Test methods for seating and storage unit strength and durability | |
|---|---|---|
| EN 14749:2016 | Domestic and kitchen storage units – Safety requirements and test methods | |
| EN 62471:2008 | Photobiological safety of LED lighting products for indoor use |
US and Canada office-furniture standards
| North America procurement and testing reference | Recommended references: ANSI/BIFMA X5.9 |
|---|
Standards applicable to China-market projects
| GB/T 3324-2017 | General technical requirements for wooden furniture, applicable for panel structural performance | |
|---|---|---|
| GB 18580-2017 | Formaldehyde emission limit for engineered wood panels, recommended E1/ENF grade for indoor use | |
| GB/T 4897.3-2003 | Particleboard for furniture use, applicable for structural core panel requirements |
This product must meet the following technical requirements: 1. GB/T 3324-2017: General technical requirements for wooden furniture, applicable for panel structural performance; 2. GB 18580-2017: Formaldehyde emission limit for engineered wood panels, recommended E1/ENF grade for indoor use; 3. GB/T 4897.3-2003: Particleboard for furniture use, applicable for structural core panel requirements; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
