| 纠错时间 | 修改字段 | 原参数 | 修改后参数 | 说明 / 状态 |
|---|---|---|---|---|
No parameter correction records exist. If you spot inaccurate data, click the flag icon at the end of the corresponding row to submit feedback. | ||||
mm / 英寸自动双单位换算 · 工程采购基础规格
| 3-seater sofa overall dimensions | 2100 x 850 x 880 mm | |
|---|---|---|
| Single armchair overall dimensions | 900 x 800 x 880 mm | |
| Seat height from floor | 420 mm | |
| Seat depth | 550 mm | |
| Backrest height above seat | 460 mm | |
| Armrest height above seat | 200 mm | |
| Coffee table overall dimensions | 1200 x 600 x 450 mm | |
| Side end table overall dimensions | 600 x 600 x 500 mm | |
| Stainless steel support leg diameter | 50 mm | |
| Tempered glass tabletop thickness | 10 mm | |
| Sofa base trim height | 30 mm | |
| Arm trim width | 20 mm | |
| Finished Seat Cushion Thickness | 90 mm | |
| Backrest Padding Thickness | 70 mm | |
| Lumbar Support Zone Height | 240 mm | |
| Clear Width Between Armrests | 540 mm |
净重 / 最大承重 / 适用人数 / 耐久性能
| 3-seater sofa net weight | 95 kg | |
|---|---|---|
| Per-seat static load capacity | 150 kg | |
| Total set seating capacity | 5 people | |
| Foam density for seat cushions | 40 kg/m³ | |
| Foam rebound rate | 45% | |
| Upholstery abrasion resistance | 50000 Martindale cycles | |
| Seam stitch pitch | 3 mm | |
| Seat foam density | 40 kg/m³ | |
| Seat foam rebound rate | 45% | |
| Structural durability cycle rating | 100000 seat load cycles |
工程采购验收核心字段 · 面板基材 / 五金 / 框架 / 面料
| Seat and back upholstery | Black smooth polyurethane (PU) faux leather | |
|---|---|---|
| Seat cushion core | High-density polyurethane foam over engineered wood seat base | |
| Backrest core | Medium-density polyurethane foam over curved engineered wood frame | |
| Armrest padding | Dense polyurethane foam top with matching faux leather covering | |
| Seating support frame | 15 mm thick engineered wood internal frame | |
| Metal trim and legs | Polished 201 stainless steel | |
| Table framing | Square-section polished stainless steel tubular frame | |
| Table tops | 10mm thick black tempered glass with polished edge | |
| Table foot pads | Non-slip rubber floor protectors fitted to base of all metal legs | |
| Upholstery stitching | High-tensile polyester thread matching black upholstery color | |
| Seating internal frame | 15mm thick moisture-resistant engineered wood frame, 8% moisture content limit | |
| Seating support system | 4mm diameter sinuous steel springs spaced 100mm apart over 50mm elastic webbing |
升降 / 旋转 / 倾仰 / 锁定 / 移动 / 储物功能
| Seating support | Fixed upright back angle of 105 degrees | |
|---|---|---|
| Floor protection | Cylindrical stainless steel legs with integrated rubber glides distribute seating weight evenly and prevent scuffing on wood, tile or carpeted office flooring | |
| Table surface function | Smooth non-porous black tempered glass tops resist liquid staining and allow quick wipe cleaning between meetings | |
| Stainless steel frame structure | Cantilevered open-base table design eliminates cross-braces at floor level to allow easy foot placement and cleaning access under tables | |
| Set configuration | Coordinated matching profile across sofa, armchairs and tables creates uniform formal appearance for executive reception spaces | |
| Armrest support | Padded curved armrests provide consistent elbow support for seated users during extended conversations, with metal edge trim to prevent upholstery wear at contact points | |
| Upholstery performance | Smooth non-porous faux leather surface resists common office spills from coffee, water and ink for low-maintenance daily operation | |
| Seating support geometry | Fixed upright back angle of 105 degrees | |
| Floor protection system | Cylindrical stainless steel legs with integrated 5mm rubber glides distribute seating weight evenly and prevent scuffing on wood, tile or carpeted office flooring | |
| Table surface performance | Smooth non-porous black tempered glass tops resist liquid staining from coffee, water and ink, allowing full wipe cleaning in 30 seconds between meetings | |
| Table frame design | Cantilevered open-base table design eliminates cross-braces at floor level to provide 400mm clear foot space under tables for easy foot placement and cleaning access | |
| Set visual coordination | Coordinated matching profile across sofa, armchairs and tables creates uniform formal appearance, with identical arm trim, leg design and upholstery finish across all seating units |
经核验的外箱 / 毛重 / 组装 / 装柜数据
| Number of shipping packages per complete set | 6 packages | |
|---|---|---|
| Reference carton dimensions for 3-seater sofa | 2150 x 900 x 650 mm | |
| Reference carton dimensions for single armchair | 950 x 850 x 650 mm | |
| Reference carton dimensions for coffee table | 1250 x 650 x 120 mm | |
| Reference carton dimensions for side table | 650 x 650 x 120 mm | |
| Total set gross shipping weight | 220 kg | |
| Total shipping volume per set | 2.2 CBM | |
| On-site assembly time for 2 workers | 60 minutes | |
| 40ft HQ container loading quantity | 58 sets | |
| Standard commercial warranty | 3 years |
推荐空间 / 目标用户 / 使用方式
| Executive reception areas | Formal uniform appearance for corporate lobbies, executive floor reception zones to accommodate visiting guests and meeting participants | |
|---|---|---|
| Meeting and waiting rooms | Medium-firm upright seating suitable for 45 minute waiting periods and informal discussion sessions in office environments | |
| Government and institutional office spaces | Conservative black and stainless steel finish aligns with formal public sector workspace design requirements | |
| Small office conference breakout spaces | 5-person seating capacity fits small breakout zones for quick team discussions or guest meetings | |
| Recommended matching layout | Position 3-seater sofa against a wall, place two single armchairs facing at 45-degree angles, center coffee table between seats with side table adjacent to the gap between sofa and one armchair for refreshments | |
| Floor compatibility | Suitable for installation on wood laminate, tile, low-pile carpet and commercial vinyl office flooring without additional floor protection due to integrated rubber foot pads | |
| Executive reception lobbies | Formal uniform black and stainless steel appearance for corporate lobbies and executive floor reception zones to accommodate visiting guests, with easy-clean surfaces for high-traffic use | |
| Office waiting and meeting rooms | Medium-firm upright seating suitable for 45 minute waiting periods and informal discussion sessions in corporate office environments |
欧洲市场准入与化学品要求
| Applicable office furniture safety standard | EN 1335:2020 Office furniture - Office work chairs - Part 1: Dimensions - safety requirements | |
|---|---|---|
| Applicable upholstered furniture durability standard | EN 16139:2013 Furniture - Strength, durability and safety - Requirements for non-domestic seating | |
| Applicable furniture surface safety standard | EN 12521:2015 Furniture - Strength, durability and safety - Requirements for domestic tables | |
| Non-domestic seating safety standard | EN 16139:2013 Furniture - Strength, durability and safety - Requirements for non-domestic seating | |
| Domestic table performance standard | EN 12521:2015 Furniture - Strength, durability and safety - Requirements for domestic tables | |
| Furniture surface emission standard | EN 16516:2017 Construction products - Assessment of release of dangerous substances - Determination of emissions into indoor air |
美国及加拿大办公家具标准
| Applicable lounge seating performance standard | ANSI/BIFMA X2021Lounge Seating - Tests | |
|---|---|---|
| Applicable occasional table performance standard | ANSI/BIFMA X2021Desk Products and Occasional Tables - Tests | |
| Lounge seating performance standard | ANSI/BIFMA X2022Lounge Seating - Tests | |
| Occasional table performance standard | ANSI/BIFMA X2021Occasional Tables - Tests |
适用于中国市场项目的标准
| Applicable upholstered furniture safety standard | GB/T 3324General technical requirements for wooden furniture | |
|---|---|---|
| Applicable glass furniture safety standard | GB/T 3280Cold rolled stainless steel plate and strip; GB 15763.2Safety glazing materials in building - Part 2: Tempered glass | |
| Applicable furniture environmental standard | GB 18584Indoor decorating and refurbishing materials - Limit of harmful substances of wood based furniture | |
| Wood furniture general standard | GB/T 3324General technical requirements for wooden furniture | |
| Glass safety standard | GB 15763.2Safety glazing materials in building - Part 2: Tempered glass | |
| Stainless steel material standard | GB/T 3280Cold rolled stainless steel plate and strip |
本产品须满足以下技术参数要求： 1. Applicable upholstered furniture safety standard：GB/T 3324General technical requirements for wooden furniture； 2. Applicable glass furniture safety standard：GB/T 3280Cold rolled stainless steel plate and strip; GB 15763.2Safety glazing materials in building - Part 2: Tempered glass； 3. Applicable furniture environmental standard：GB 18584Indoor decorating and refurbishing materials - Limit of harmful substances of wood based furniture； 4. Wood furniture general standard：GB/T 3324General technical requirements for wooden furniture； 5. Glass safety standard：GB 15763.2Safety glazing materials in building - Part 2: Tempered glass； 6. Stainless steel material standard：GB/T 3280Cold rolled stainless steel plate and strip； 最终交付参数、检测报告和验收标准以双方采购合同为准。
以下文件均根据当前已发布商品参数实时生成。
直接下载英文参数报告，可选择公制或英制单位。
导出全部商品信息与参数模块，文件内容统一使用英文。
包含英文标题、规格、材质、标准和采购字段，可用于国际平台刊登。
生成申报品名、材质、用途、尺寸及海关申报要素。
打开导出工具__BT00000_KAIERTE OFS-PU-SS-5PC行政办公沙发和桌子套装为专业商业环境提供了一种连贯、正式的家具解决方案。五件套系列包括一张三座沙发、两把相配的单人扶手椅、一张咖啡桌和一张边桌，流线型的视觉轮廓由光滑的黑色内饰和抛光的不锈钢装饰和框架所定义。推荐的布局将三座沙发靠墙放置，两把扶手椅以45度角面向沙发，咖啡桌位于座位组的中心，侧桌放置在沙发和一把扶手椅之间的缝隙中，用于存放点心或小装饰品。所有座椅单元共享相同的弯曲软垫扶手、圆柱形抛光腿和定制的内饰线条，以创造一致的抛光外观。__BRN_S座椅单元采用防潮工程木内部框架，配以弯曲钢弹簧和弹性织带的支撑系统。座椅和靠背采用商用级聚氨酯泡沫填充，提供中等强度的支撑，固定的105度直立靠背角度，专为短期商务会议和接待访问而优化。座椅采用光滑的黑色聚氨酯人造革装饰，采用高强度聚酯缝线，接缝耐用，扶手边缘和座椅底座采用抛光不锈钢镶边，以减少高接触点的磨损。圆柱形不锈钢支腿配有防滑橡胶滑块，可均匀分配重量，防止硬地板和低绒毛地毯划伤。桌子采用悬臂式抛光不锈钢方管框架，带开放式底座，消除了地板水平的横撑，便于放置脚部和清洁，顶部装有厚黑色钢化玻璃，边缘抛光，可防止液体污染，在使用之间快速擦拭干净。 该套装共可容纳五人，其符合人体工程学的尺寸可在典型的接待和会议期间为成年用户提供直立、舒适的定位。它非常适合企业高管接待大厅、办公室候诊室、正式的政府和机构工作区以及小型会议休息区，因为其保守的黑色和不锈钢饰面符合专业设计标准，其低维护表面可承受频繁的公共使用。__BRN_对于采购计划，请注意将船舶分为六个拆卸包，两名工人的现场组装需要60分钟。该套件提供3年标准保修，涵盖框架和结构部件。在最终下单之前，买方应直接与供应商确认确切的材料等级、玻璃安全等级和精确的产品规格，因为参考尺寸和性能指标符合该产品类别的行业标准。
Admin WhatsApp