Name: 4-Piece Two-Tone Gray and Cognac Upholstered Office Reception Sofa Set
Brand: HUIBANG
SKU: 42Z1J3

纠错时间

修改字段

原参数

修改后参数

说明 / 状态

暂无参数纠错记录，发现错误可点击行末旗标提交

PRODUCT MODULE 01 / 06

基础物理尺寸

mm / 英寸自动双单位换算 · 工程采购基础规格

数据来源：工厂资料结构化字段，最终以实测值为准

产品外部尺寸（宽 × 深 × 高）	2350 × 920 × 880 mm
Seat height from floor	430 mm
Seat depth (usable)	580 mm
Backrest height from seat	450 mm
Armrest height from floor	620 mm
Leg height (floor clearance under sofa)	120 mm
Seat Cushion Thickness	180 mm
Back Cushion Thickness	160 mm
Leg Height / Floor Clearance	160 mm

PRODUCT MODULE 02 / 06

重量、承重与性能参数

净重 / 最大承重 / 适用人数 / 耐久性能

数据来源：产品性能数据，采购前请核对具体测试口径

Total set net weight (all 4 pieces)	210 kg
Seat static load capacity per seat position	150 kg
Total seating capacity for full set	6 people
Seat foam density	45 kg/m³
Backrest foam density	32 kg/m³
Seat foam thickness	120 mm
Suggested warranty for commercial use	3 years
Upholstery abrasion resistance (Martindale)	50000 cycles
Backrest foam thickness	100 mm
Seam tensile strength	120 N

PRODUCT MODULE 03 / 06

材质与结构参数

工程采购验收核心字段 · 面板基材 / 五金 / 框架 / 面料

数据来源：以工厂材质清单与验货报告为准

Seat and inner back upholstery	Gray matte faux leather (PU) with 1.2mm thickness
Outer frame and lower side panel upholstery	Cognac brown matte faux leather (PU) with 1.2mm thickness
Support legs	1.5mm thick matte black powder-coated carbon steel, tapered angled design
Internal support frame	30mm x 50mm kiln-dried solid hardwood frame, corner-blocked for stability
Seat support system	80mm wide sinuous steel springs with 50mm spacing over elastic webbing
Throw pillows (included per seat unit)	Matching cognac brown faux leather covers, 450mm x 450mm, filled with 1.2kg high-resilience polyfill
Seam construction	Reinforced nylon stitching with 8 stitches per inch, edge piping on all upholstery seams
Upholstery surface finish	Stain-resistant matte coating, no high-gloss finish
Armrest internal support	15mm thick plywood substrate under foam padding, wrapped in matching upholstery
Foot pads	8mm thick non-slip rubber floor protection pads on each leg base
Timber Frame Section / Moisture	Primary section ≥30 × 50 mm; recommended moisture 12%
Spring / Webbing Specification	Sinuous spring wire 4 mm; elastic webbing 70 mm wide

PRODUCT MODULE 04 / 06

功能与调节参数

升降 / 旋转 / 倾仰 / 锁定 / 移动 / 储物功能

数据来源：功能配置参数，以供应商正式规格为准

Stationary fixed seating design	No recline, swivel or rocking mechanisms, intended for upright short-duration guest seating
Throw pillow customization	Included pillows are removable for cleaning or position adjustment, secured by hidden velcro fasteners to prevent slipping
Floor clearance design	120mm open space under all seating units allows access for robotic vacuums and standard floor cleaning tools
Matching set configuration	All four units share identical upholstery, leg finish, and arm profile to create a coordinated reception layout
Armrest structure	Integrated padded armrests wrapped in matching upholstery to provide full arm support and a clean modern silhouette
Modular placement flexibility	Freestanding units can be arranged in linear, L-shape or separate conversational layouts without connecting hardware
Surface maintenance design	Smooth non-porous upholstery allows spot cleaning with mild detergent for daily office maintenance
Non-marking foot contact	Rubber foot pads prevent scuffing and scratching on hard wood, tile and polished stone flooring under rated static load
Cushion Service Configuration	Recommended 2 removable/replaceable cushion methods

PRODUCT MODULE 05 / 06

包装与物流参数

经核验的外箱 / 毛重 / 组装 / 装柜数据

数据来源：外贸报价与装柜测算参考

Number of shipping cartons per full set	4 cartons
3-seater sofa carton dimensions	2400 x 760 x 680 mm
Single armchair and 2-seater combined carton dimensions	1750 x 760 x 680 mm, 1150 x 760 x 680 mm
Total set gross shipping weight	240 kg
Total shipping volume (CBM) per full set	2.4 CBM
Assembly time per full set	60 minutes
40ft HQ container loading quantity (full sets)	28 sets
Packaging protection	5mm thick EPE foam wrapping plus 5-ply corrugated carton with corner protection blocks
2-seater sofa carton dimensions	1750 x 780 x 690 mm
Single armchair carton dimensions (each)	1150 x 780 x 690 mm

PRODUCT MODULE 06 / 06

应用场景与使用方式

推荐空间 / 目标用户 / 使用方式

数据来源：依据产品结构与品类整理的推荐应用场景

Corporate office reception areas	Formal two-tone design creates a professional welcome space for visitors waiting for meetings, appropriate for high-traffic lobby use
Executive office waiting zones	Coordinated matching set provides consistent upscale seating adjacent to private executive offices, supports small guest groups
Coworking space common areas	Stain-resistant upholstery and durable construction supports frequent daily use in shared coworking lounge spaces
Modern lounge and break rooms	Comfortable padded seating provides relaxed seating for employee breaks or informal small team discussions
Showroom and customer waiting areas	Coordinated polished appearance presents a consistent brand aesthetic for retail or service business customer waiting zones
Small meeting breakout spaces	Freestanding arrangement allows flexible conversational layouts for informal small group meetings of up to six people
Modern employee lounge and break rooms	Comfortable padded seating with 10-degree back angle provides relaxed seating for employee breaks or informal small team discussions of 30 minutes or less
Commercial showroom and customer waiting areas	Coordinated polished two-tone appearance presents a consistent brand aesthetic for retail, automotive or service business customer waiting zones

STANDARD S1

欧盟市场准入要求 * EN 标准

欧洲市场准入与化学品要求

Applicable standard EN 13759:2009	Domestic and contract furniture - Seating - Test methods for strength and durability, applicable for contract office reception seating durability verification
Applicable standard EN 1022:2018	Domestic and contract furniture - Seating - Determination of stability, applicable to verify stability of fixed freestanding sofa units
Applicable standard EN 16139:2013	Furniture - Strength, durability and safety - Requirements for non-domestic seating, applicable for commercial office use load and safety verification

STANDARD S2

北美市场采购验货参考 * ANSI/BIFMA 标准

美国及加拿大家具标准

北美市场选型与验收参考	ANSI/BIFMA X5.4 公共及休闲座椅

STANDARD S3

适用于中国市场项目的标准 * GB 标准

适用于中国市场项目的标准

Applicable standard GB/T 3324-2017	General technical requirements for wooden furniture, applicable to the internal hardwood frame structure for quality verification
Applicable standard GB 18584-2001	Indoor decorating and refurbishing materials - Limit of harmful substances of wood based furniture, applicable for formaldehyde emission verification of frame and padding materials
Applicable standard GB/T 1952.1-2012	General technical requirements for sofas, applicable for structural stability, load capacity and durability testing for commercial use
Applicable standard GB 20400-2006	Limit of harmful matter in leather and fur, applicable for verification of harmful substances in PU or leather upholstery

招标文件标准化描述文本

本产品须满足以下技术参数要求：
1. Applicable standard GB/T 3324-2017：General technical requirements for wooden furniture, applicable to the internal hardwood frame structure for quality verification；
2. Applicable standard GB 18584-2001：Indoor decorating and refurbishing materials - Limit of harmful substances of wood based furniture, applicable for formaldehyde emission verification of frame and padding materials；
3. Applicable standard GB/T 1952.1-2012：General technical requirements for sofas, applicable for structural stability, load capacity and durability testing for commercial use；
4. Applicable standard GB 20400-2006：Limit of harmful matter in leather and fur, applicable for verification of harmful substances in PU or leather upholstery；
最终交付参数、检测报告和验收标准以双方采购合同为准。

GENERATED EXPORTS

一键导出完整商品资料

以下文件均根据当前已发布商品参数实时生成。

完整参数报告 PDF

直接下载英文参数报告，可选择公制或英制单位。

PDF · SOF-REC-2T-4PC-01

完整参数 Excel

导出全部商品信息与参数模块，文件内容统一使用英文。

XLSX · SOF-REC-2T-4PC-01

外贸 Listing 模板

包含英文标题、规格、材质、标准和采购字段，可用于国际平台刊登。

XLSX · LISTING

海关申报数据

生成申报品名、材质、用途、尺寸及海关申报要素。

CUSTOMS · SOF-REC-2T-4PC-01打开导出工具

页面快速操作

发布采购询价

产品描述

The HUIBANG model SOF-REC-2T-4PC-01 is a coordinated 4-piece reception sofa set finished in a polished two-tone palette of matte gray and cognac brown faux leather, accented by tapered matte black powder-coated carbon steel legs for a clean, modern silhouette. Each unit in the set shares consistent arm profiles, tailored edge piping, and matching seam construction to support cohesive visual design across layouts. The set includes one 3-seater sofa, one 2-seater sofa, and two single armchairs, with a total seating capacity of six people across all units. Constructed for commercial use, the set features a kiln-dried solid hardwood internal frame with corner blocking for stability, supported by sinuous steel springs over elastic webbing to carry consistent static load per seat. All seating surfaces and inner back panels are wrapped in 1.2mm thick gray matte faux leather, while outer frames and lower side panels use matching cognac brown faux leather, both finished with a stn-resistant non-gloss coating. Padded armrests sit atop plywood substrates for durable support, with high-resilience polyurethane foam forming seat cushions and medium-firm foam filling back cushions, topped with matching removable cognac faux leather throw pillows secured with hidden velcro to prevent slipping. Non-slip rubber foot pads on each leg protect hard flooring surfaces from scuffs and scratches, while open floor clearance under all units allows easy access for standard cleaning equipment. The upholstery carries commercial-grade abrasion resistance, with reinforced nylon stitching built to withstand heavy, frequent use. The freestanding units require no connecting hardware, allowing flexible arrangement in linear, L-shaped, or separate conversational layouts to suit different space configurations. The stationary fixed design is tailored for upright, short-duration seating, with smooth non-porous upholstery that supports simple spot cleaning with mild detergent for routine maintenance. This sofa set is well suited for corporate office reception lobbies, executive office waiting zones, high-traffic coworking common areas, employee break rooms, retl and commercial showroom waiting areas, and small meeting breakout spaces, where its polished formal aesthetic creates a welcoming, professional impression for visitors and staff alike. For procurement planning, note that the set ships in four individual cartons with protective EPE foam wrapping, corner blocks, and corrugated packaging, with assembly requiring attachment of legs for all units. A 3-year commercial warranty covering frame and upholstery is recommended for the product, which supports flexible contner loading for bulk orders. All dimension, construction, and performance values referenced represent the maximum endpoint of standard comparable product ranges, and final material specifications should be confirmed against supplier bills of materials prior to large-scale purchase.

4-Piece Two-Tone Gray and Cognac Upholstered Office Reception Sofa Set Specifications

供应商与现货