| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
| 3-seater sofa overall dimensions | 2350 x 920 x 880 mm | |
|---|---|---|
| Single armchair overall dimensions | 1100 x 920 x 880 mm | |
| 2-seater sofa overall dimensions | 1700 x 920 x 880 mm | |
| Seat height from floor | 430 mm | |
| Seat depth (usable) | 580 mm | |
| Backrest height from seat | 450 mm | |
| Armrest height from floor | 620 mm | |
| Leg height (floor clearance under sofa) | 120 mm | |
| Seat Cushion Thickness | 180 mm | |
| Back Cushion Thickness | 160 mm | |
| Leg Height / Floor Clearance | 160 mm |
Net weight / load capacity / users / durability
| Total set net weight (all 4 pieces) | 210 kg | |
|---|---|---|
| Seat static load capacity per seat position | 150 kg | |
| Total seating capacity for full set | 6 people | |
| Seat foam density | 45 kg/m³ | |
| Backrest foam density | 32 kg/m³ | |
| Seat foam thickness | 120 mm | |
| Suggested warranty for commercial use | 3 years | |
| Upholstery abrasion resistance (Martindale) | 50000 cycles | |
| Backrest foam thickness | 100 mm | |
| Seam tensile strength | 120 N |
Core acceptance fields · Panels / hardware / frame / upholstery
| Seat and inner back upholstery | Gray matte faux leather (PU) with 1.2mm thickness | |
|---|---|---|
| Outer frame and lower side panel upholstery | Cognac brown matte faux leather (PU) with 1.2mm thickness | |
| Support legs | 1.5mm thick matte black powder-coated carbon steel, tapered angled design | |
| Internal support frame | 30mm x 50mm kiln-dried solid hardwood frame, corner-blocked for stability | |
| Seat support system | 80mm wide sinuous steel springs with 50mm spacing over elastic webbing | |
| Throw pillows (included per seat unit) | Matching cognac brown faux leather covers, 450mm x 450mm, filled with 1.2kg high-resilience polyfill | |
| Seam construction | Reinforced nylon stitching with 8 stitches per inch, edge piping on all upholstery seams | |
| Upholstery surface finish | Stain-resistant matte coating, no high-gloss finish | |
| Armrest internal support | 15mm thick plywood substrate under foam padding, wrapped in matching upholstery | |
| Foot pads | 8mm thick non-slip rubber floor protection pads on each leg base | |
| Timber Frame Section / Moisture | Primary section ≥30 × 50 mm; recommended moisture 12% | |
| Spring / Webbing Specification | Sinuous spring wire 4 mm; elastic webbing 70 mm wide |
Adjustment / rotation / tilt / mobility / storage features
| Stationary fixed seating design | No recline, swivel or rocking mechanisms, intended for upright short-duration guest seating | |
|---|---|---|
| Throw pillow customization | Included pillows are removable for cleaning or position adjustment, secured by hidden velcro fasteners to prevent slipping | |
| Floor clearance design | 120mm open space under all seating units allows access for robotic vacuums and standard floor cleaning tools | |
| Matching set configuration | All four units share identical upholstery, leg finish, and arm profile to create a coordinated reception layout | |
| Armrest structure | Integrated padded armrests wrapped in matching upholstery to provide full arm support and a clean modern silhouette | |
| Modular placement flexibility | Freestanding units can be arranged in linear, L-shape or separate conversational layouts without connecting hardware | |
| Surface maintenance design | Smooth non-porous upholstery allows spot cleaning with mild detergent for daily office maintenance | |
| Non-marking foot contact | Rubber foot pads prevent scuffing and scratching on hard wood, tile and polished stone flooring under rated static load | |
| Cushion Service Configuration | Recommended 2 removable/replaceable cushion methods |
Verified carton / gross weight / assembly / loading data
| Number of shipping cartons per full set | 4 cartons | |
|---|---|---|
| 3-seater sofa carton dimensions | 2400 x 760 x 680 mm | |
| Single armchair and 2-seater combined carton dimensions | 1750 x 760 x 680 mm, 1150 x 760 x 680 mm | |
| Total set gross shipping weight | 240 kg | |
| Total shipping volume (CBM) per full set | 2.4 CBM | |
| Assembly time per full set | 60 minutes | |
| 40ft HQ container loading quantity (full sets) | 28 sets | |
| Packaging protection | 5mm thick EPE foam wrapping plus 5-ply corrugated carton with corner protection blocks | |
| 2-seater sofa carton dimensions | 1750 x 780 x 690 mm | |
| Single armchair carton dimensions (each) | 1150 x 780 x 690 mm |
Recommended spaces / users / usage modes
| Corporate office reception areas | Formal two-tone design creates a professional welcome space for visitors waiting for meetings, appropriate for high-traffic lobby use | |
|---|---|---|
| Executive office waiting zones | Coordinated matching set provides consistent upscale seating adjacent to private executive offices, supports small guest groups | |
| Coworking space common areas | Stain-resistant upholstery and durable construction supports frequent daily use in shared coworking lounge spaces | |
| Modern lounge and break rooms | Comfortable padded seating provides relaxed seating for employee breaks or informal small team discussions | |
| Showroom and customer waiting areas | Coordinated polished appearance presents a consistent brand aesthetic for retail or service business customer waiting zones | |
| Small meeting breakout spaces | Freestanding arrangement allows flexible conversational layouts for informal small group meetings of up to six people | |
| Modern employee lounge and break rooms | Comfortable padded seating with 10-degree back angle provides relaxed seating for employee breaks or informal small team discussions of 30 minutes or less | |
| Commercial showroom and customer waiting areas | Coordinated polished two-tone appearance presents a consistent brand aesthetic for retail, automotive or service business customer waiting zones |
EU Market Access Requirements* EN Standards
| Applicable standard EN 13759:2009 | Domestic and contract furniture - Seating - Test methods for strength and durability, applicable for contract office reception seating durability verification | |
|---|---|---|
| Applicable standard EN 1022:2018 | Domestic and contract furniture - Seating - Determination of stability, applicable to verify stability of fixed freestanding sofa units | |
| Applicable standard EN 16139:2013 | Furniture - Strength, durability and safety - Requirements for non-domestic seating, applicable for commercial office use load and safety verification |
US and Canada office-furniture standards
| North America procurement and testing reference | ANSI/BIFMA X5.4 Public and Lounge Seating |
|---|
Standards applicable to China-market projects
| Applicable standard GB/T 3324-2017 | General technical requirements for wooden furniture, applicable to the internal hardwood frame structure for quality verification | |
|---|---|---|
| Applicable standard GB 18584-2001 | Indoor decorating and refurbishing materials - Limit of harmful substances of wood based furniture, applicable for formaldehyde emission verification of frame and padding materials | |
| Applicable standard GB/T 1952.1-2012 | General technical requirements for sofas, applicable for structural stability, load capacity and durability testing for commercial use | |
| Applicable standard GB 20400-2006 | Limit of harmful matter in leather and fur, applicable for verification of harmful substances in PU or leather upholstery |
This product must meet the following technical requirements: 1. Applicable standard GB/T 3324-2017: General technical requirements for wooden furniture, applicable to the internal hardwood frame structure for quality verification; 2. Applicable standard GB 18584-2001: Indoor decorating and refurbishing materials - Limit of harmful substances of wood based furniture, applicable for formaldehyde emission verification of frame and padding materials; 3. Applicable standard GB/T 1952.1-2012: General technical requirements for sofas, applicable for structural stability, load capacity and durability testing for commercial use; 4. Applicable standard GB 20400-2006: Limit of harmful matter in leather and fur, applicable for verification of harmful substances in PU or leather upholstery; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
