纠错时间

修改字段

原参数

修改后参数

说明 / 状态

暂无参数纠错记录，发现错误可点击行末旗标提交

PRODUCT MODULE 01 / 06

基础物理尺寸

mm / 英寸自动双单位换算 · 工程采购基础规格

数据来源：工厂资料结构化字段，最终以实测值为准

产品外部尺寸（宽 × 深 × 高）	2800 × 1450 × 750 mm
Seat Cushion Thickness	180 mm
Back Cushion Thickness	160 mm
Leg Height / Floor Clearance	160 mm

PRODUCT MODULE 02 / 06

重量、承重与性能参数

净重 / 最大承重 / 适用人数 / 耐久性能

数据来源：产品性能数据，采购前请核对具体测试口径

Net weight	78 kg
Seating capacity	4 persons
Distributed static seat load	480 kg
Chaise concentrated load	150 kg
Backrest lateral support load	90 kg per seated position
Back cushion foam density	30 kg/m3
Seat foam density	35 kg/m3
Seat foam compression set acceptance	8 percent after 22 hours at 70 degrees C
Fabric abrasion acceptance	30000 Martindale cycles
Fabric pilling grade	Grade 3 to 4 after 2000 rubs

PRODUCT MODULE 03 / 06

材质与结构参数

工程采购验收核心字段 · 面板基材 / 五金 / 框架 / 面料

数据来源：以工厂材质清单与验货报告为准

Outer upholstery	Cream-colored woven fabric with a smooth matte face covering the continuous seat, back and arms
Throw pillow upholstery	Four removable copper-orange square pillow covers with sewn edge seams
Seat padding	180 mm polyurethane foam pad over a supported deck, finished with a tailored front seam
Back and arm padding	150 mm foam and soft filling layer wrapped over a curved internal frame
Internal load frame	Kiln-dried timber or engineered-wood frame with corner blocks and screwed joints as procurement target
Seat support deck	Elastic webbing or sinuous-spring deck over timber rails with protective fabric lining

PRODUCT MODULE 04 / 06

功能与调节参数

升降 / 旋转 / 倾仰 / 锁定 / 移动 / 储物功能

数据来源：功能配置参数，以供应商正式规格为准

Seating layout	Curved four-position layout with three upright seats and one right-side chaise for lounge or reception use
Reclining use	The 1050 mm deep rounded end permits side sitting or reclining without a separate footrest
Pillow support	Four loose back pillows provide adjustable lumbar and shoulder support across the continuous backrest
Cleaning access	Pillow covers should use zippers or removable closures; fixed body upholstery requires vacuuming and spot cleaning

PRODUCT MODULE 05 / 06

包装与物流参数

经核验的外箱 / 毛重 / 组装 / 装柜数据

数据来源：外贸报价与装柜测算参考

Reference Package Count	1 set / 2 cartons
Reference Assembly Time	40 minutes per set
Reference Module Carton Dimensions	2200× 1050× 850 mm
Reference Packaging Volume	1.8 m³/item
Reference Packaged Gross Weight	110 kg/item

PRODUCT MODULE 06 / 06

应用场景与使用方式

推荐空间 / 目标用户 / 使用方式

数据来源：依据产品结构与品类整理的推荐应用场景

Lounge and reception areas	Suits hotel lobbies, club lounges, sales galleries and office reception zones where the curved 2800 mm footprint creates a relaxed conversation group
Residential living spaces	Fits open-plan living rooms or large studios as a statement four-seat sofa with a dedicated chaise-side reclining position

STANDARD S1

欧盟市场准入要求 * EN 标准

欧洲市场准入与化学品要求

EN 12520:2015	Furniture strength, durability and safety requirements for domestic seating, applicable as a baseline structural test reference
EN 1022:2018	Domestic furniture seating determination of stability, applicable to the asymmetrical curved and chaise form

STANDARD S3

适用于中国市场项目的标准 * GB 标准

适用于中国市场项目的标准

GB/T 3324-2017	General technical requirements for wooden furniture, applicable to the hidden timber or engineered-wood load frame
GB/T 10357.6-2013	Test method for furniture mechanical properties, applicable to sofa strength and durability evaluation
GB 18401-2010 Category C	National general safety technical code for textile products, applicable to upholstery and pillow fabrics

招标文件标准化描述文本

本产品须满足以下技术参数要求：
1. GB/T 3324-2017：General technical requirements for wooden furniture, applicable to the hidden timber or engineered-wood load frame；
2. GB/T 10357.6-2013：Test method for furniture mechanical properties, applicable to sofa strength and durability evaluation；
3. GB 18401-2010 Category C：National general safety technical code for textile products, applicable to upholstery and pillow fabrics；
最终交付参数、检测报告和验收标准以双方采购合同为准。

GENERATED EXPORTS

一键导出完整商品资料

以下文件均根据当前已发布商品参数实时生成。

完整参数报告 PDF

直接下载英文参数报告，可选择公制或英制单位。

PDF · CUR-SOFA-2800-CRM

完整参数 Excel

导出全部商品信息与参数模块，文件内容统一使用英文。

XLSX · CUR-SOFA-2800-CRM

外贸 Listing 模板

包含英文标题、规格、材质、标准和采购字段，可用于国际平台刊登。

XLSX · LISTING

海关申报数据

生成申报品名、材质、用途、尺寸及海关申报要素。

CUSTOMS · CUR-SOFA-2800-CRM打开导出工具

页面快速操作

发布采购询价

产品描述

This curved upholstered lounge sofa combines a four-position seating arrangement with an integrated right-side chaise, creating a relaxed profile suited to both commercial lounge settings and spacious residential interiors. Its continuous curved silhouette links three upright seats with a generous rounded chaise end, encouraging face-to-face conversation while preserving a clear focal point in the room. A low-back design and flowing arms give the piece a soft, residential character, while the cream woven upholstery provides a smooth matte surface across the seat, back and arms. Four removable copper-orange square throw pillows add a contrasting accent and can be arranged along the continuous backrest for adjustable lumbar and shoulder support. Each pillow cover features sewn edge seams and is intended to use a zipper or removable closure for easier maintenance, while the fixed body upholstery should be vacuumed and spot cleaned. The sofa is built around a concealed internal support structure. The procurement target is a kiln-dried timber or engineered-wood frame with corner blocks and screwed joints, paired with an elastic webbing or sinuous-spring seat deck over timber rails and protective fabric lining. The seat uses a 180 mm polyurethane foam pad on a supported deck, finished with a tailored front seam, while the curved back and arms combine foam and a soft filling layer over the internal frame. The seat cushion thickness is 180 mm, the back cushion thickness is 160 mm, and leg height or floor clearance is 160 mm. Seat foam density is 35 kg/m3 and back cushion foam density is 30 kg/m3. Designed for four people, the layout supports ordinary upright seating as well as casual reclining. The 1050 mm deep rounded chaise end allows side sitting or reclining without a separate footrest, making the sofa practical for waiting, lounging and informal reception use. The published distributed static seat load is 480 kg, chaise concentrated load is 150 kg, and backrest lateral support load is 90 kg per seated position. The model is appropriate for hotel lobbies, club lounges, sales galleries and office reception zones where its curved 2800 mm footprint can anchor a conversation area. It also works in open-plan living rooms and large studios as a statement four-seat sofa with a dedicated chaise-side position. Procurement planning should account for an unbranded product supplied as one set in two cartons, a packaged gross weight of 110 kg, packaging volume of 1.8 cubic meters per item, reference carton dimensions of 2200 by 1050 by 850 mm, and a reference assembly time of 40 minutes per set. Buyers should also confirm frame specification, deck type, pillow closure and fabric care requirements before purchase.

Curved Upholstered Four-Seat Lounge Sofa with Chaise End and Throw Pillows Specifications

供应商与现货